{"title":"Coating Inspection Instruments","description":null,"products":[{"product_id":"defelsko-positest-hhd-high-voltage-holiday-detector","title":"Defelsko PosiTest HHD | High voltage Holiday Detector","description":"\u003cp\u003eAfter a protective coatings has been applied, it is important to ensure there are no defects or discontinuities present that expose the substrate beneath. Small areas of thin or missing coating, called 'pinholes' or 'holidays', can become foci for corrosion and drastically reduce the life of a protective coating system. A holiday detector is a non-destructive instrument used for detecting these discontinuities. Other names include porosity detector, continuity tester, and holiday tester.\u003c\/p\u003e\n\n\u003cp\u003eDeFelsko offers two types of porosity\/pinhole detectors: low voltage (wet sponge) and high voltage (spark tester). Low voltages detectors, like the PosiTest \u003cem\u003eLPD\u003c\/em\u003e, are typically used on coating systems less than 500 µm (20 mils) thick. High voltage spark testers, like the PosiTest \u003cem\u003eHHD\u003c\/em\u003e operate at voltages up to 35,000V and are typically used on coatings more than 500 µm (20 mils) thick.\u003c\/p\u003e\n","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":42170176340081,"sku":"PosiTest HHD","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/defelsko-holiday-detector-default-title-defelsko-positest-hhd-high-voltage-holiday-detector-25400831606897.jpg?v=1761751980"},{"product_id":"defelsko-positest-lpd-low-voltage-pinhole-detector-for-metal-and-concrete-substrates","title":"DeFelsko LPDKITB | PosiTest LPD Low Voltage Pinhole Detector, Basic Kit | 9–90 V, Rectangle Sponge","description":"\u003cp\u003eThe DeFelsko LPDKITB is the PosiTest LPD Basic Kit, a low voltage wet sponge pinhole detector for coatings on metal and concrete. It includes what is needed to test with a rectangular sponge. GroundSense shows the user that the instrument is properly grounded, and regulated outputs do not drop under load. Low voltage detectors like this are typically used on coatings below 500 µm (20 mils).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour voltage settings: 9 V, 67.5 V (two sensitivities) and 90 V\u003c\/li\u003e\n\u003cli\u003eThickness range 0–500 µm (0–20 mils)\u003c\/li\u003e\n\u003cli\u003eIP65 sealed housing; 180 g without batteries\u003c\/li\u003e\n\u003cli\u003eRuns on 3 AAA batteries, over 150 hours\u003c\/li\u003e\n\u003cli\u003eIncludes base tube, rectangle sponge and hardware, 4.5 m ground wire, insulating collar and hard shell case\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":42170176372849,"sku":"LPDKITB","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/defelsko-holiday-detector-default-title-defelsko-positest-lpd-low-voltage-pinhole-detector-for-metal-and-concrete-substrates-25400831344753.jpg?v=1761751980"},{"product_id":"defelsko-atm20-positest-at-m-manual-adhesion-tester-range-0-7-20-mpa","title":"DeFelsko ATM20 | PosiTest AT-M Manual Adhesion Tester | 20 mm Kit","description":"\u003cp\u003eThe DeFelsko ATM20 is the PosiTest AT-M manual pull-off adhesion tester supplied with the 20 mm Kit for higher bond strength coatings on metal. A manual hydraulic pump applies smooth pressure with a single stroke, while a pull rate indicator helps the operator hold the correct rate. It is widely used by coating inspectors on steel structures and fabricated parts.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0.7–20 MPa (100–3000 psi)\u003c\/li\u003e\n\u003cli\u003eIncludes 20 aluminium Ø20 mm self-aligning dollies and a 20 mm hole saw\u003c\/li\u003e\n\u003cli\u003eStores maximum pull-off pressure, pull rate, duration and dolly size for 200 pulls\u003c\/li\u003e\n\u003cli\u003eColour display; field replaceable AAA batteries\u003c\/li\u003e\n\u003cli\u003eIP65 sealed housing\u003c\/li\u003e\n\u003cli\u003eConforms to ASTM D4541, ISO 4624 and other standards\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":42170262552689,"sku":"ATM20","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/defelsko-adhesion-testers-default-title-defelsko-atm20-positest-at-m-manual-adhesion-tester-range-0-7-20-mpa-25382115737713.jpg?v=1761750011"},{"product_id":"defelsko-atm50-positest-at-m-manual-adhesion-tester-range-0-4-3-5-mpa","title":"DeFelsko ATM50 | PosiTest AT-M Manual Adhesion Tester | 50 mm Kit","description":"\u003cp\u003eWith its 50 mm Kit, the DeFelsko ATM50 PosiTest AT-M manual adhesion tester is set up for lower bond strength coatings on wood, concrete and plastic. The larger dolly area improves resolution at low pull-off values. Its single-stroke manual hydraulic pump and pull rate indicator give controlled, repeatable tests on site or in the lab.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0.1–3.3 MPa (16–480 psi)\u003c\/li\u003e\n\u003cli\u003eEight Ø50 mm aluminium dollies and a 50 mm hole saw\u003c\/li\u003e\n\u003cli\u003ePull rate indicator to monitor and adjust rate of pull\u003c\/li\u003e\n\u003cli\u003eMemory for 200 pulls; downloads to PosiSoft Desktop\u003c\/li\u003e\n\u003cli\u003eWeatherproof, dustproof and shockproof (IP65)\u003c\/li\u003e\n\u003cli\u003eCalibrated to ±1% with a NIST traceable load cell\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":42170262585457,"sku":"ATM50","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/defelsko-adhesion-testers-default-title-defelsko-atm50-positest-at-m-manual-adhesion-tester-range-0-4-3-5-mpa-25382115803249.jpg?v=1761750011"},{"product_id":"defelsko-atm50t-positest-at-m-manual-adhesion-tester-range-0-4-2-585-mpa","title":"DeFelsko ATM50T | PosiTest AT-M Manual Adhesion Tester | 50 x 50 mm Tile Kit","description":"\u003cp\u003eThe DeFelsko ATM50T is the manual PosiTest AT-M set up with the 50 x 50 mm Tile Kit for cementitious tile adhesives tested to EN 12004-2. Square steel plates with threaded posts are bonded to the tile, and the single-stroke hydraulic pump applies the pull. It suits tiling contractors, adhesive manufacturers and test labs needing a simple, battery-powered tester.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0.1–2.585 MPa (13–375 psi)\u003c\/li\u003e\n\u003cli\u003eFour 50 x 50 mm steel plates with threaded post\u003c\/li\u003e\n\u003cli\u003ePull rate indicator for manual control\u003c\/li\u003e\n\u003cli\u003eMemory for 200 pulls with PosiSoft Desktop compatibility\u003c\/li\u003e\n\u003cli\u003eSealed IP65 enclosure\u003c\/li\u003e\n\u003cli\u003eSupplied with ResinLab EP11HT 2-part epoxy and carrying case\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":42170262618225,"sku":"ATM50T","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/defelsko-adhesion-testers-default-title-defelsko-atm50t-positest-at-m-manual-adhesion-tester-range-0-4-2-585-mpa-25382116163697.jpg?v=1761750011"},{"product_id":"defelsko-atm50c-positest-at-m-manual-adhesion-tester-range-0-4-3-3-mpa","title":"DeFelsko ATM50C | PosiTest AT-M Manual Adhesion Tester | 50 mm Concrete Kit","description":"\u003cp\u003eThe DeFelsko ATM50C configures the PosiTest AT-M manual adhesion tester for concrete surfaces and overlays, conforming to ASTM C1583 and EN 1542. It comes with heavy steel dollies and a diamond grit hole saw for coring through to the substrate. Flooring, repair and overlay contractors use it to check tensile bond strength without powered equipment.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0.1–3.3 MPa (16–480 psi)\u003c\/li\u003e\n\u003cli\u003eFour Ø50 mm steel dollies at least 25 mm thick\u003c\/li\u003e\n\u003cli\u003e50 mm diamond grit hole saw with arbor\u003c\/li\u003e\n\u003cli\u003eManual hydraulic pump with pull rate indicator\u003c\/li\u003e\n\u003cli\u003eStores results for up to 200 pulls\u003c\/li\u003e\n\u003cli\u003eRuns on AAA alkaline batteries\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":42170262683761,"sku":"ATM50C","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/defelsko-adhesion-testers-default-title-defelsko-atm50c-positest-at-m-manual-adhesion-tester-range-0-4-3-3-mpa-25382116327537.jpg?v=1761750011"},{"product_id":"defelsko-ata20-positest-at-a-automatic-adhesion-tester-range-0-7-24-mpa","title":"DeFelsko ATA20 | PosiTest AT-A Automatic Adhesion Tester | 20 mm Kit, 0.7–24 MPa","description":"\u003cp\u003eThe DeFelsko ATA20 is the PosiTest AT-A automatic pull-off adhesion tester supplied as the 20 mm kit, intended for higher bond strength coatings on metals. An electronically controlled hydraulic pump applies smooth, continuous pull-off pressure, reducing operator influence, and the kit includes everything needed to start testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0.7–24 MPa (100–3500 psi), 220–7550 N; resolution 0.01 MPa (1 psi); accuracy ±1% full scale\u003c\/li\u003e\n\u003cli\u003e20 aluminium Ø20 mm dollies and a 20 mm hole saw included\u003c\/li\u003e\n\u003cli\u003eMemory for 100,000 pulls in up to 1,000 batches, with pass\/fail and nature of fracture\u003c\/li\u003e\n\u003cli\u003eIP65 sealed enclosure; colour touchscreen usable with gloves\u003c\/li\u003e\n\u003cli\u003eBuilt-in Li-ion battery for over 250 tests per charge, USB-C charging\u003c\/li\u003e\n\u003cli\u003eConforms to ASTM D4541\/D7234, ISO 4624\/16276-1 and others\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":42170262716529,"sku":"ATA20","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/defelsko-adhesion-testers-default-title-defelsko-ata20-positest-at-a-automatic-adhesion-tester-range-0-7-24-mpa-25382116360305.jpg?v=1761750010"},{"product_id":"defelsko-ata50-positest-at-a-automatic-adhesion-tester-range-0-1-3-8-mpa-16-560-psi","title":"DeFelsko ATA50 | PosiTest AT-A Automatic Adhesion Tester | 50 mm Kit, 0.1–3.8 MPa","description":"\u003cp\u003eThe DeFelsko ATA50 is the PosiTest AT-A automatic pull-off adhesion tester supplied as the 50 mm kit, intended for lower bond strength coatings on wood, concrete and plastic. An electronically controlled hydraulic pump applies smooth, continuous pull-off pressure, reducing operator influence, and the kit includes everything needed to start testing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0.1–3.8 MPa (16–560 psi), 220–7550 N; resolution 0.01 MPa (1 psi); accuracy ±1% full scale\u003c\/li\u003e\n\u003cli\u003e8 aluminium Ø50 mm dollies and a 50 mm hole saw included\u003c\/li\u003e\n\u003cli\u003eMemory for 100,000 pulls in up to 1,000 batches, with pass\/fail and nature of fracture\u003c\/li\u003e\n\u003cli\u003eIP65 sealed enclosure; colour touchscreen usable with gloves\u003c\/li\u003e\n\u003cli\u003eBuilt-in Li-ion battery for over 250 tests per charge, USB-C charging\u003c\/li\u003e\n\u003cli\u003eConforms to ASTM D4541\/D7234, ISO 4624\/16276-1 and others\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":42170262749297,"sku":"ATA50","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/defelsko-adhesion-testers-default-title-defelsko-ata50-positest-at-a-automatic-adhesion-tester-range-0-1-3-8-mpa-16-560-psi-25382116425841.jpg?v=1761750009"},{"product_id":"defelsko-ata50t-positest-at-a-automatic-adhesion-tester-range0-1-3-0-mpa-13-440-psi","title":"DeFelsko ATA50T | PosiTest AT-A Automatic Adhesion Tester | 50 x 50 mm Tile Kit","description":"\u003cp\u003eBuilt for tile adhesion work, the DeFelsko ATA50T combines the PosiTest AT-A automatic adhesion tester with the 50 x 50 mm Tile Kit. It measures the pull-off strength of cementitious tile adhesives in line with EN 12004-2 using square steel plates with threaded posts. The automatic hydraulic pump delivers a steady pull, and results can be recorded with pass\/fail status and fracture type.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0.1–3.0 MPa (13–440 psi), 220–7550 N\u003c\/li\u003e\n\u003cli\u003eFour 50 x 50 mm steel plates with threaded post\u003c\/li\u003e\n\u003cli\u003eAdjustable pull rate, pull limit and hold time\u003c\/li\u003e\n\u003cli\u003eMemory for 100,000 pulls in up to 1,000 batches\u003c\/li\u003e\n\u003cli\u003eConnects to PosiSoft Desktop, PosiSoft.net and the PosiTector App\u003c\/li\u003e\n\u003cli\u003eCalibrated to ±1% accuracy with a NIST traceable load cell\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":42170262782065,"sku":"ATA50T","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/defelsko-adhesion-testers-default-title-defelsko-ata50t-positest-at-a-automatic-adhesion-tester-range0-1-3-0-mpa-13-440-psi-25382116491377.jpg?v=1761750007"},{"product_id":"defelsko-ata50c-positest-at-a-automatic-adhesion-tester-range-0-1-3-8-mpa-16-560-psi","title":"DeFelsko ATA50C | PosiTest AT-A Automatic Adhesion Tester | 50 mm Concrete Kit","description":"\u003cp\u003eThe DeFelsko ATA50C is the PosiTest AT-A automatic pull-off adhesion tester configured with the 50 mm Concrete Kit for testing concrete surfaces and overlays to ASTM C1583 and EN 1542. An electronically controlled hydraulic pump applies smooth, continuous pull-off pressure, reducing operator influence on the test. Contractors and inspectors use it to verify the tensile bond of overlays and repairs on concrete.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0.1–3.8 MPa (16–560 psi), 220–7550 N\u003c\/li\u003e\n\u003cli\u003eFour Ø50 mm steel dollies at least 25 mm thick, plus 50 mm diamond grit hole saw with arbor\u003c\/li\u003e\n\u003cli\u003eUser adjustable pull rate, pull limit and hold time\u003c\/li\u003e\n\u003cli\u003eStores 100,000 pulls in up to 1,000 batches with pass\/fail and nature of fracture\u003c\/li\u003e\n\u003cli\u003eColour touchscreen, built-in Li-ion battery and USB-C charging\u003c\/li\u003e\n\u003cli\u003eSealed enclosure meets or exceeds IP65\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":42170262880369,"sku":"ATA50C","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/defelsko-adhesion-testers-default-title-defelsko-ata50c-positest-at-a-automatic-adhesion-tester-range-0-1-3-8-mpa-16-560-psi-25382116524145.jpg?v=1761750007"},{"product_id":"dmq-qc2-f-ferrous-coating-thickness-gauge-with-integrated-probe-range-0-to-1250-m-0-to-49mils","title":"DMQ QC2 F | Coating Thickness Gauge, Ferrous | Integrated probe, 0–1250 µm","description":"\u003cp\u003eThe DMQ QC2 F is a compact one-hand coating thickness gauge with an integrated probe for non-magnetic coatings on ferrous (steel) substrates. It covers 0–1250 µm and is the simplest QC model, without memory or data transfer. Typical coatings include paint, varnish, zinc, chrome and galvanising.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntegrated probe; external probes cannot be connected\u003c\/li\u003e\n\u003cli\u003eRange 0–1250 µm with ±1–3% or ±2.5 µm accuracy\u003c\/li\u003e\n\u003cli\u003eSet of 3 calibration shims supplied\u003c\/li\u003e\n\u003cli\u003eHigh and low alarms with LED indicator\u003c\/li\u003e\n\u003cli\u003eNo memory or USB output on this model\u003c\/li\u003e\n\u003cli\u003eMeets ISO 2178 and ASTM D7091, E376, D1186\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe QC2 F ships in a high-impact carrying case containing the QC2 unit, 3 calibration shims, a quick user guide and a certificate of conformity.\u003c\/p\u003e","brand":"Demeq","offers":[{"title":"Default Title","offer_id":42170272088177,"sku":"QC2 F","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/demeq-coating-thickness-gauges-default-title-dmq-qc2-f-ferrous-coating-thickness-gauge-with-integrated-probe-range-0-to-1250-m-0-to-49mils-25382126846065.png?v=1761749935"},{"product_id":"dmq-qc2-dlf-ferrous-coating-thickness-gauge-with-integrated-probe-and-datalogger-range-0-to-1250-m-0-to-49mils","title":"DMQ QC2 DLF | Coating Thickness Gauge with Datalogger | 0–1250 µm, 1000-reading memory","description":"\u003cp\u003eThe DMQ QC2 DLF takes the integrated-probe QC2 ferrous coating gauge and adds a datalogger: 1000 readings can be stored and transferred by USB to the free dmq DataCenter software. It measures non-magnetic coatings from 0 to 1250 µm on steel.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMemory for 1000 readings\u003c\/li\u003e\n\u003cli\u003eUSB data transfer to dmq DataCenter (pendrive supplied)\u003c\/li\u003e\n\u003cli\u003eIntegrated probe for ferrous bases, 0–1250 µm\u003c\/li\u003e\n\u003cli\u003eAccuracy ±1–3% or ±2.5 µm, whichever is larger\u003c\/li\u003e\n\u003cli\u003eThree calibration shims included\u003c\/li\u003e\n\u003cli\u003eHigh\/low alarms; ISO 2178 and ASTM D7091\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe QC2 DLF ships in a high-impact carrying case containing the QC2 unit, 3 calibration shims, a quick user guide, dmq DataCenter on pendrive and a certificate of conformity.\u003c\/p\u003e","brand":"Demeq","offers":[{"title":"Default Title","offer_id":42170272120945,"sku":"QC2 DLF","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/demeq-coating-thickness-gauges-default-title-dmq-qc2-dlf-ferrous-coating-thickness-gauge-with-integrated-probe-and-datalogger-range-0-to-1250-m-0-to-49mils-25382126977137.gif?v=1761749928"},{"product_id":"dmq-qc3-f-ferrous-coating-thickness-gauge-range-0-to-15mm-0-to-5-905in","title":"DMQ QC3 F | Coating Thickness Gauge, Ferrous | 0–1500 µm, CalTag probe","description":"\u003cp\u003eThe DMQ QC3 F measures non-magnetic coatings over ferrous bases with an external CalTag standard probe covering 0–1500 µm. As a ferrous QC3 model it also accepts the special probes: miniature, V-cut and extended-range up to 5000 µm. It stores 5000 readings but has no data transfer.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStraight ferrous standard probe with CalTag calibration\u003c\/li\u003e\n\u003cli\u003eCompatible with mini, V-cut and extended-range probes\u003c\/li\u003e\n\u003cli\u003eMemory for 5000 readings; no USB output\u003c\/li\u003e\n\u003cli\u003eThree calibration modes and real-time statistics\u003c\/li\u003e\n\u003cli\u003eCalibration kit with base and 3 shims supplied\u003c\/li\u003e\n\u003cli\u003eISO 2178, ASTM D1186, D7091, E376\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe QC3 F ships in a high-impact carrying case containing the QC3 unit, a CalTag standard probe, a calibration kit (base and 3 shims), a user manual and a certificate of conformity.\u003c\/p\u003e","brand":"Demeq","offers":[{"title":"Default Title","offer_id":42170272153713,"sku":"QC3 F","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/demeq-coating-thickness-gauges-default-title-dmq-qc3-f-ferrous-coating-thickness-gauge-range-0-to-15mm-0-to-5-905in-25382127009905.gif?v=1761749928"},{"product_id":"dmq-qc3-dlf-ferrous-coating-thickness-gauge-with-datalogger-range-0-to-15mm-0-to-5-905in","title":"DMQ QC3 DLF | Coating Thickness Gauge, Ferrous, Datalogger | 0–1500 µm, USB output","description":"\u003cp\u003eThe DMQ QC3 DLF is the datalogging ferrous model of the QC3 Series. On top of the 5000-reading memory it sends data by USB to dmq DataCenter, and it works with the standard ferrous probe as well as the miniature, V-cut and extended-range special probes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUSB data transfer with dmq DataCenter software\u003c\/li\u003e\n\u003cli\u003e5000-reading memory and real-time statistics\u003c\/li\u003e\n\u003cli\u003eStandard ferrous probe: 0–1500 µm, ±1–3% or ±2.5 µm\u003c\/li\u003e\n\u003cli\u003eAccepts mini (0–750 µm) and extended-range (0–5000 µm) probes\u003c\/li\u003e\n\u003cli\u003eBase and 3 calibration shims included\u003c\/li\u003e\n\u003cli\u003eISO 2178 and ASTM D1186 compliant\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe QC3 DLF ships in a high-impact carrying case containing the QC3 unit, a CalTag standard probe, a calibration kit (base and 3 shims), a USB cable, dmq DataCenter on pendrive, a user manual and a certificate of conformity.\u003c\/p\u003e","brand":"Demeq","offers":[{"title":"Default Title","offer_id":42170272252017,"sku":"QC3 DLF","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/demeq-coating-thickness-gauges-default-title-dmq-qc3-dlf-ferrous-coating-thickness-gauge-with-datalogger-range-0-to-15mm-0-to-5-905in-25382127140977.jpg?v=1761749927"},{"product_id":"dmq-qc3-n-non-ferrous-coating-thickness-gauge-range-0-to-15mm-0-to-5-905in","title":"DMQ QC3 N | Coating Thickness Gauge, Non-Ferrous | Non-ferrous base, 0–1500 µm","description":"\u003cp\u003eThe DMQ QC3 N is the QC3 model for non-metallic coatings on non-ferrous metals such as aluminium, for example anodising and paint. It uses a CalTag straight non-ferrous probe (0–1500 µm), keeps 5000 readings in memory and has no data output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNon-ferrous standard probe, 0–1500 µm\u003c\/li\u003e\n\u003cli\u003eSuited to anodising and paint on non-ferrous bases\u003c\/li\u003e\n\u003cli\u003eAlso listed for the V-cut non-ferrous probe\u003c\/li\u003e\n\u003cli\u003e5000-reading memory; no USB output\u003c\/li\u003e\n\u003cli\u003eCalibration kit: base plus 3 shims\u003c\/li\u003e\n\u003cli\u003eISO 2360, ASTM D1400, B244, D7091, E376\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe QC3 N ships in a high-impact carrying case containing the QC3 unit, a CalTag standard probe, a calibration kit (base and 3 shims), a user manual and a certificate of conformity.\u003c\/p\u003e","brand":"Demeq","offers":[{"title":"Default Title","offer_id":42170272284785,"sku":"QC3 N","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/demeq-coating-thickness-gauges-default-title-dmq-qc3-n-non-ferrous-coating-thickness-gauge-range-0-to-15mm-0-to-5-905in-25382127534193.jpg?v=1761751195"},{"product_id":"dmq-qc3-dln-non-ferrous-coating-thickness-gauge-with-datalogger-range-0-to-15mm-0-to-5-905in","title":"DMQ QC3 DLN | Coating Thickness Gauge, Non-Ferrous, Datalogger | 0–1500 µm, USB output","description":"\u003cp\u003eWith the DMQ QC3 DLN, non-ferrous coating readings can be stored (5000) and exported over USB to dmq DataCenter. The instrument measures non-metallic coatings on non-ferrous substrates using a CalTag non-ferrous probe with a 0–1500 µm range.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUSB output and dmq DataCenter software\u003c\/li\u003e\n\u003cli\u003eMemory for 5000 readings\u003c\/li\u003e\n\u003cli\u003eStraight non-ferrous CalTag probe, 0–1500 µm\u003c\/li\u003e\n\u003cli\u003eAccuracy ±1–3% or ±2.5 µm\u003c\/li\u003e\n\u003cli\u003eThree calibration modes\u003c\/li\u003e\n\u003cli\u003eISO 2360 and ASTM B244, D1400\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe QC3 DLN ships in a high-impact carrying case containing the QC3 unit, a CalTag standard probe, a calibration kit (base and 3 shims), a USB cable, dmq DataCenter on pendrive, a user manual and a certificate of conformity.\u003c\/p\u003e","brand":"Demeq","offers":[{"title":"Default Title","offer_id":42170272317553,"sku":"QC3 DLN","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/demeq-coating-thickness-gauges-default-title-dmq-qc3-dln-non-ferrous-coating-thickness-gauge-with-datalogger-range-0-to-15mm-0-to-5-905in-25382127566961.jpg?v=1761751195"},{"product_id":"dmq-qc5-f-advanced-dry-coating-thickness-gauge-for-ferrous-range-0-to-15mm-0-to-5-905in","title":"DMQ QC5 F | Advanced Coating Thickness Gauge, Ferrous | 0–1500 µm, 32,000 readings","description":"\u003cp\u003eThe DMQ QC5 F is the ferrous model of the advanced QC5 Series. It measures non-magnetic coatings on steel with a CalTag standard probe (0–1500 µm) and supports the full set of ferrous special probes. Readings go into a 32,000-value memory; this version has no data output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStraight ferrous CalTag probe, 0–1500 µm\u003c\/li\u003e\n\u003cli\u003e32,000-reading memory with real-time graphics and statistics\u003c\/li\u003e\n\u003cli\u003eNine calibration modes\u003c\/li\u003e\n\u003cli\u003eSupports mini, V-cut and 0–5000 µm extended-range probes\u003c\/li\u003e\n\u003cli\u003eNo USB output (see QC5 DLF)\u003c\/li\u003e\n\u003cli\u003eISO 2178, ASTM D1186, D7091, E376\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe QC5 F ships in a high-impact carrying case containing the QC5 unit, a CalTag standard probe, a calibration kit (base and 3 shims), a user manual and a certificate of conformity.\u003c\/p\u003e","brand":"Demeq","offers":[{"title":"Default Title","offer_id":42170272350321,"sku":"QC5 F","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/demeq-coating-thickness-gauges-default-title-dmq-qc5-f-advanced-dry-coating-thickness-gauge-for-ferrous-range-0-to-15mm-0-to-5-905in-25382127632497.jpg?v=1761751195"},{"product_id":"dmq-qc5-dlf-advanced-dry-coating-thickness-gauge-for-ferrous-with-datalogger-range-0-1500-m-0-60mils","title":"DMQ QC5 DLF | Advanced Coating Thickness Gauge, Ferrous, Datalogger | USB, 32,000 readings","description":"\u003cp\u003eThe DMQ QC5 DLF combines the advanced QC5 ferrous gauge with USB data transfer to dmq DataCenter. It records up to 32,000 readings with live graphics and statistics and accepts the miniature, V-cut and extended-range ferrous special probes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUSB data output; dmq DataCenter on pendrive\u003c\/li\u003e\n\u003cli\u003eMemory for 32,000 readings\u003c\/li\u003e\n\u003cli\u003eFerrous CalTag probe: 0–1500 µm, ±1–3% or ±2.5 µm\u003c\/li\u003e\n\u003cli\u003eNine calibration modes\u003c\/li\u003e\n\u003cli\u003eCompatible with ferrous special probes up to 5000 µm\u003c\/li\u003e\n\u003cli\u003eISO 2178 and ASTM D1186\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe QC5 DLF ships in a high-impact carrying case containing the QC5 unit, a CalTag standard probe, a calibration kit (base and 3 shims), a USB cable, dmq DataCenter on pendrive, a user manual and a certificate of conformity.\u003c\/p\u003e","brand":"Demeq","offers":[{"title":"Default Title","offer_id":42170272383089,"sku":"QC5 DLF","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/demeq-coating-thickness-gauges-default-title-dmq-qc5-dlf-advanced-dry-coating-thickness-gauge-for-ferrous-with-datalogger-range-0-1500-m-0-60mils-25382127665265.jpg?v=1761751195"},{"product_id":"dmq-qc5-n-advanced-dry-coating-thickness-gauge-for-non-ferrous-with-datalogger-range-0-to-15mm-0-to-5-905in","title":"DMQ QC5 N | Advanced Coating Thickness Gauge, Non-Ferrous | 0–1500 µm, 32,000 readings","description":"\u003cp\u003eThe DMQ QC5 N is the advanced QC5 gauge for non-metallic coatings on non-ferrous metals such as anodising, enamels and paint on aluminium. It uses a CalTag non-ferrous probe (0–1500 µm), stores 32,000 readings and has no data output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStraight non-ferrous CalTag probe, 0–1500 µm\u003c\/li\u003e\n\u003cli\u003eListed for the V-cut non-ferrous probe\u003c\/li\u003e\n\u003cli\u003e32,000-reading memory with real-time graphics and statistics\u003c\/li\u003e\n\u003cli\u003eNine calibration modes\u003c\/li\u003e\n\u003cli\u003eNo USB output\u003c\/li\u003e\n\u003cli\u003eISO 2360, ASTM D1400, B244, D7091, E376\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe QC5 N ships in a high-impact carrying case containing the QC5 unit, a CalTag standard probe, a calibration kit (base and 3 shims), a user manual and a certificate of conformity.\u003c\/p\u003e","brand":"Demeq","offers":[{"title":"Default Title","offer_id":42170272448625,"sku":"QC5 N","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/demeq-coating-thickness-gauges-default-title-dmq-qc5-n-advanced-dry-coating-thickness-gauge-for-non-ferrous-with-datalogger-range-0-to-15mm-0-to-5-905in-25382127730801.jpg?v=1761751195"},{"product_id":"dmq-qc5-dln-advanced-dry-coating-thickness-gauge-for-non-ferrous-with-data-logger-range-0-to-15mm-0-to-5-905in","title":"DMQ QC5 DLN | Advanced Coating Thickness Gauge, Non-Ferrous, Datalogger | USB, 32,000 readings","description":"\u003cp\u003eThe DMQ QC5 DLN is the datalogging non-ferrous version of the QC5 Series. Coatings on aluminium and other non-ferrous bases are measured with a CalTag probe, and the 32,000 stored readings can be exported over USB to dmq DataCenter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUSB transfer to dmq DataCenter\u003c\/li\u003e\n\u003cli\u003e32,000-reading memory, live graphics and statistics\u003c\/li\u003e\n\u003cli\u003eNon-ferrous probe 0–1500 µm, ±1–3% or ±2.5 µm\u003c\/li\u003e\n\u003cli\u003eNine calibration modes\u003c\/li\u003e\n\u003cli\u003eCalibration kit with base and 3 shims\u003c\/li\u003e\n\u003cli\u003eISO 2360 and ASTM B244, D1400\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe QC5 DLN ships in a high-impact carrying case containing the QC5 unit, a CalTag standard probe, a calibration kit (base and 3 shims), a USB cable, dmq DataCenter on pendrive, a user manual and a certificate of conformity.\u003c\/p\u003e","brand":"Demeq","offers":[{"title":"Default Title","offer_id":42170272481393,"sku":"QC5 DLN","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/demeq-coating-thickness-gauges-default-title-dmq-qc5-dln-advanced-dry-coating-thickness-gauge-for-non-ferrous-with-data-logger-range-0-to-15mm-0-to-5-905in-25382127763569.jpg?v=1761751194"},{"product_id":"dmq-qc5-c-coating-thickness-gauge-for-ferrous-and-non-ferrous-range-0-to-15mm-0-to-5-905in","title":"DMQ QC5 C | Advanced Coating Thickness Gauge, Combined | Automatic F\/NF base detection","description":"\u003cp\u003eThe DMQ QC5 C uses a combined probe and automatic base detection, so the gauge recognises ferrous and non-ferrous substrates by itself. One instrument therefore covers paint on steel and anodising on aluminium. It stores 32,000 readings; data output is not included on this model.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAutomatic ferrous \/ non-ferrous base recognition\u003c\/li\u003e\n\u003cli\u003eStraight combined CalTag probe, 0–1500 µm\u003c\/li\u003e\n\u003cli\u003eAccepts mini, V-cut and extended-range special probes\u003c\/li\u003e\n\u003cli\u003e32,000-reading memory with real-time graphics and statistics\u003c\/li\u003e\n\u003cli\u003eNine calibration modes\u003c\/li\u003e\n\u003cli\u003eISO 2178, ISO 2360, ASTM D1186, D1400, B244\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe QC5 C ships in a high-impact carrying case containing the QC5 unit, a CalTag standard probe, a calibration kit (base and 3 shims), a user manual and a certificate of conformity.\u003c\/p\u003e","brand":"Demeq","offers":[{"title":"Default Title","offer_id":42170272514161,"sku":"QC5 C","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/demeq-coating-thickness-gauges-default-title-dmq-qc5-c-coating-thickness-gauge-for-ferrous-and-non-ferrous-range-0-to-15mm-0-to-5-905in-25382127861873.jpg?v=1761751192"},{"product_id":"dmq-qc5-dlc-advanced-dry-coating-thickness-gauge-for-ferrous-and-non-ferrous-with-datalogger-range-0-to-15mm-0-to-5-905in","title":"DMQ QC5 DLC | Advanced Coating Thickness Gauge, Combined, Datalogger | Auto base, USB output","description":"\u003cp\u003eThe DMQ QC5 DLC is the top QC5 model: automatic ferrous\/non-ferrous base detection with a combined probe, plus USB data transfer to dmq DataCenter. It suits automotive paint, galvanising and anodising inspections where results must be documented.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAutomatic base detection with combined CalTag probe\u003c\/li\u003e\n\u003cli\u003eUSB output and dmq DataCenter software\u003c\/li\u003e\n\u003cli\u003e32,000-reading memory with real-time graphics\u003c\/li\u003e\n\u003cli\u003eStandard range 0–1500 µm, ±1–3% or ±2.5 µm\u003c\/li\u003e\n\u003cli\u003eSupports ferrous special probes, incl. 0–5000 µm\u003c\/li\u003e\n\u003cli\u003eISO 2178 and ISO 2360 compliant\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe QC5 DLC ships in a high-impact carrying case containing the QC5 unit, a CalTag standard probe, a calibration kit (base and 3 shims), a USB cable, dmq DataCenter on pendrive, a user manual and a certificate of conformity.\u003c\/p\u003e","brand":"Demeq","offers":[{"title":"Default Title","offer_id":42170272809073,"sku":"QC5 DLC","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/demeq-coating-thickness-gauges-default-title-dmq-qc5-dlc-advanced-dry-coating-thickness-gauge-for-ferrous-and-non-ferrous-with-datalogger-range-0-to-15mm-0-to-5-905in-25382128124017.jpg?v=1761751191"},{"product_id":"reed-r7800-coating-thickness-gauge","title":"REED R7800 | Coating Thickness Gauge | 0–1250 µm, USB","description":"\u003cp\u003eThe REED R7800 measures coating thickness non-invasively over 0 to 1250 µm (0.1 to 49.2 mils). It supports zero or two-point calibration, has user-adjustable high\/low alarms and a USB port for analysing results in the supplied software.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0 to 1250 µm\u003c\/li\u003e\n\u003cli\u003eZero or two-point calibration\u003c\/li\u003e\n\u003cli\u003eAdjustable high\/low alarms\u003c\/li\u003e\n\u003cli\u003eUSB port with accompanying software\u003c\/li\u003e\n\u003cli\u003e4-digit colour LCD, 2 x AA, 180 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"REED Instruments","offers":[{"title":"Default Title","offer_id":42170294861937,"sku":"R7800","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/reed-instruments-coating-thickness-gauges-default-title-reed-r7800-coating-thickness-gauge-25397602058353.jpg?v=1761749748"},{"product_id":"reed-cm-8822-coating-thickness-gauge","title":"REED CM-8822 | Coating Thickness Gauge | 0–1000 µm, Ferrous \u0026 Non-Ferrous","description":"\u003cp\u003eThe REED CM-8822 coating thickness gauge is supplied with ferrous and non-ferrous probes and measures from 0 to 1000 µm (0 to 40 mils). A zero button allows quick adjustment in the field, and basic accuracy is 3%.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFerrous and non-ferrous probes included\u003c\/li\u003e\n\u003cli\u003eRange 0 to 1000 µm (0 to 40 mils)\u003c\/li\u003e\n\u003cli\u003eZero button for field adjustment\u003c\/li\u003e\n\u003cli\u003eLCD display\u003c\/li\u003e\n\u003cli\u003e4 x AA batteries, 260 g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"REED Instruments","offers":[{"title":"Default Title","offer_id":42170294960241,"sku":"CM-8822","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/reed-instruments-coating-thickness-gauges-default-title-reed-cm-8822-coating-thickness-gauge-25397602189425.jpg?v=1761749746"},{"product_id":"defelsko-f1-positector-standard-with-6000-ferrous-probe-measuring-range-0-60-mils-0-1500-m","title":"DeFelsko F1 | PosiTector 6000 F Coating Thickness Gauge, Standard | 0–1500 µm, Standard Body","description":"\u003cp\u003eThe DeFelsko F1 pairs the PosiTector 6000 F probe with the Standard gage body. The F is an integral probe for non-magnetic coatings on steel substrates, measuring 0–1500 µm (0–60 mils). It suits painters, fabricators and inspectors checking one-handed checks on coated steel who want quick, repeatable readings and a simple 1,000-reading memory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0–1500 µm (0–60 mils)\u003c\/li\u003e\n\u003cli\u003eAccuracy ±(1 µm + 1%) 0–50 µm; ±(2 µm + 1%) \u0026gt;50 µm\u003c\/li\u003e\n\u003cli\u003eIntegral probe design suited to one-handed operation\u003c\/li\u003e\n\u003cli\u003eStandard gage body stores 1,000 readings per probe\u003c\/li\u003e\n\u003cli\u003eFast mode gives 90+ readings per minute\u003c\/li\u003e\n\u003cli\u003e2.8 in colour touchscreen in an IP65-rated enclosure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":42170447134833,"sku":"F1","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/defelsko-coating-thickness-gauges-default-title-defelsko-f1-positector-standard-with-6000-ferrous-probe-measuring-range-0-60-mils-0-1500-m-25382378373233.jpg?v=1761750955"},{"product_id":"defelsko-f3-positector-advanced-with-6000-ferrous-probe-measuring-range-0-60-mils-0-1500-m","title":"DeFelsko F3 | PosiTector 6000 F Coating Thickness Gauge, Advanced | 0–1500 µm, Advanced Body","description":"\u003cp\u003eBuilt on the Advanced gage body, the DeFelsko F3 combines it with the PosiTector 6000 F probe, an integral probe for non-magnetic coatings on steel substrates. With the F fitted, the gauge reads 0–1500 µm (0–60 mils). For one-handed checks on coated steel, this configuration helps inspectors who report against SSPC-PA 2, ISO 19840 or IMO PSPC and transfer data by WiFi or Bluetooth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0–1500 µm (0–60 mils)\u003c\/li\u003e\n\u003cli\u003eAccuracy ±(1 µm + 1%) 0–50 µm; ±(2 µm + 1%) \u0026gt;50 µm\u003c\/li\u003e\n\u003cli\u003eIntegral probe design suited to one-handed operation\u003c\/li\u003e\n\u003cli\u003eAdvanced gage body stores 250,000 readings in up to 1,000 batches\u003c\/li\u003e\n\u003cli\u003eWiFi and Bluetooth 4.0 for PosiSoft.net and the PosiTector App\u003c\/li\u003e\n\u003cli\u003eCertificate of Calibration traceable to NIST or PTB included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":42170447200369,"sku":"F3","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/defelsko-coating-thickness-gauges-default-title-defelsko-f3-positector-advanced-with-6000-ferrous-probe-measuring-range-0-60-mils-0-1500-m-25382378406001.jpg?v=1761750953"},{"product_id":"defelsko-fxs1-positector-standard-with-6000-fxs-probe-measuring-range-0-80-mils-0-2000-m-1","title":"DeFelsko FXS1 | PosiTector 6000 FXS Coating Thickness Gauge, Standard | 0–2000 µm, Standard Body","description":"\u003cp\u003eThe DeFelsko FXS1 pairs the PosiTector 6000 FXS probe with the Standard gage body. The FXS is the Xtreme cabled probe for non-magnetic coatings on steel, with an alumina wear face and braided cable, measuring 0–2000 µm (0–80 mils). It suits painters, fabricators and inspectors checking coatings on rough or hot steel who want quick, repeatable readings and a simple 1,000-reading memory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0–2000 µm (0–80 mils)\u003c\/li\u003e\n\u003cli\u003eAccuracy ±(1 µm + 1%) 0–50 µm; ±(2 µm + 1%) \u0026gt;50 µm\u003c\/li\u003e\n\u003cli\u003eAlumina wear face and braided cable\u003c\/li\u003e\n\u003cli\u003eSuited to rough or hot surfaces up to 250 °C (500 °F)\u003c\/li\u003e\n\u003cli\u003eStandard gage body stores 1,000 readings per probe\u003c\/li\u003e\n\u003cli\u003eFast mode gives 90+ readings per minute\u003c\/li\u003e\n\u003cli\u003e2.8 in colour touchscreen in an IP65-rated enclosure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":42170447233137,"sku":"FXS1","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/defelsko-coating-thickness-gauges-default-title-defelsko-fxs1-positector-standard-with-6000-fxs-probe-measuring-range-0-80-mils-0-2000-m-25382378602609.png?v=1761750954"},{"product_id":"defelsko-fxs3-positector-advanced-with-6000-fxs-probe-measuring-range-0-80-mils-0-2000-m-1","title":"DeFelsko FXS3 | PosiTector 6000 FXS Coating Thickness Gauge, Advanced | 0–2000 µm, Advanced Body","description":"\u003cp\u003eBuilt on the Advanced gage body, the DeFelsko FXS3 combines it with the PosiTector 6000 FXS probe, the Xtreme cabled probe for non-magnetic coatings on steel, with an alumina wear face and braided cable. With the FXS fitted, the gauge reads 0–2000 µm (0–80 mils). For coatings on rough or hot steel, this configuration helps inspectors who report against SSPC-PA 2, ISO 19840 or IMO PSPC and transfer data by WiFi or Bluetooth.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0–2000 µm (0–80 mils)\u003c\/li\u003e\n\u003cli\u003eAccuracy ±(1 µm + 1%) 0–50 µm; ±(2 µm + 1%) \u0026gt;50 µm\u003c\/li\u003e\n\u003cli\u003eAlumina wear face and braided cable\u003c\/li\u003e\n\u003cli\u003eSuited to rough or hot surfaces up to 250 °C (500 °F)\u003c\/li\u003e\n\u003cli\u003eAdvanced gage body stores 250,000 readings in up to 1,000 batches\u003c\/li\u003e\n\u003cli\u003eWiFi and Bluetooth 4.0 for PosiSoft.net and the PosiTector App\u003c\/li\u003e\n\u003cli\u003eCertificate of Calibration traceable to NIST or PTB included\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":42170447265905,"sku":"FXS3","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/defelsko-coating-thickness-gauges-default-title-defelsko-fxs3-positector-advanced-with-6000-fxs-probe-measuring-range-0-80-mils-0-2000-m-25382378766449.png?v=1761750953"},{"product_id":"defelsko-frs1-standard-ferrous-coating-thickness-gauge-measuring-range-0-60-mils-0-1500-m","title":"DeFelsko FRS1 | PosiTector 6000 FRS Coating Thickness Gauge, Standard | 0–1500 µm, Standard Body","description":"\u003cp\u003eThe DeFelsko FRS1 pairs the PosiTector 6000 FRS probe with the Standard gage body. The FRS is a right-angle cabled probe for non-magnetic coatings on steel, made for areas with little headroom, measuring 0–1500 µm (0–60 mils). It suits painters, fabricators and inspectors checking coatings on steel in low headroom who want quick, repeatable readings and a simple 1,000-reading memory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0–1500 µm (0–60 mils)\u003c\/li\u003e\n\u003cli\u003eAccuracy ±(1 µm + 1%) 0–50 µm; ±(2 µm + 1%) \u0026gt;50 µm\u003c\/li\u003e\n\u003cli\u003eZirconia-toughened wear face with ruby tip\u003c\/li\u003e\n\u003cli\u003eStandard gage body stores 1,000 readings per probe\u003c\/li\u003e\n\u003cli\u003eFast mode gives 90+ readings per minute\u003c\/li\u003e\n\u003cli\u003e2.8 in colour touchscreen in an IP65-rated enclosure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":42202074808433,"sku":"FRS1","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/5fce3761cb609e216bb16753_PosiTector-6000-FRS-134x229-Probe-Model-Illustration_f4da2be0-00c9-40f8-ba0e-23edf829664c.jpg?v=1792807678"},{"product_id":"defelsko-fs1-standard-ferrous-coating-thickness-gauge-measuring-range-0-60-mils-0-1500-m","title":"DeFelsko FS1 | PosiTector 6000 FS Coating Thickness Gauge, Standard | 0–1500 µm, Standard Body","description":"\u003cp\u003eThe DeFelsko FS1 pairs the PosiTector 6000 FS probe with the Standard gage body. The FS is a regular cabled probe for non-magnetic coatings on steel substrates, measuring 0–1500 µm (0–60 mils). It suits painters, fabricators and inspectors checking non-magnetic coatings on steel who want quick, repeatable readings and a simple 1,000-reading memory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0–1500 µm (0–60 mils)\u003c\/li\u003e\n\u003cli\u003eAccuracy ±(1 µm + 1%) 0–50 µm; ±(2 µm + 1%) \u0026gt;50 µm\u003c\/li\u003e\n\u003cli\u003eZirconia-toughened wear face with ruby tip\u003c\/li\u003e\n\u003cli\u003eStandard gage body stores 1,000 readings per probe\u003c\/li\u003e\n\u003cli\u003eFast mode gives 90+ readings per minute\u003c\/li\u003e\n\u003cli\u003e2.8 in colour touchscreen in an IP65-rated enclosure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":42202074873969,"sku":"FS1","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/5fce3756513b8874770672a0_PosiTector-6000-FS-134x229-Probe-Model-Illustration_eca4d94f-b5b6-44ee-807a-b28965ae1877.jpg?v=1792807678"},{"product_id":"defelsko-fnds1-standard-ferrous-coating-thickness-gauge-measuring-range-0-60-mils-0-1500-m-ideal-for-duplex-coating-systems","title":"DeFelsko FNDS1 | PosiTector 6000 FNDS Coating Thickness Gauge, Standard | 0–1500 µm, Standard Body","description":"\u003cp\u003eThe DeFelsko FNDS1 pairs the PosiTector 6000 FNDS probe with the Standard gage body. The FNDS is a cabled duplex probe intended for duplex coating systems, with separate paint-layer and zinc-layer accuracy figures, measuring 0–1500 µm (0–60 mils). It suits painters, fabricators and inspectors checking duplex coating systems who want quick, repeatable readings and a simple 1,000-reading memory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0–1500 µm (0–60 mils)\u003c\/li\u003e\n\u003cli\u003eAccuracy Paint layer: ±(1 µm + 1%) 0–50 µm; ±(2 µm + 1%) \u0026gt;50 µm\u003c\/li\u003e\n\u003cli\u003eMinimum zinc thickness 13 µm (0.5 mil)\u003c\/li\u003e\n\u003cli\u003eZinc layer accuracy ±(2 µm + 1%) from 13–50 µm\u003c\/li\u003e\n\u003cli\u003eStandard gage body stores 1,000 readings per probe\u003c\/li\u003e\n\u003cli\u003eFast mode gives 90+ readings per minute\u003c\/li\u003e\n\u003cli\u003e2.8 in colour touchscreen in an IP65-rated enclosure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":42202074939505,"sku":"FNDS1","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/5fce3756513b8874770672a0_PosiTector-6000-FS-134x229-Probe-Model-Illustration_7f780257-b6e0-4994-bc68-dff7d9995aa5.jpg?v=1792807678"},{"product_id":"defelsko-f45s1-45-deg-microprobe-ferrous-coating-thickness-gauge-measuring-range-0-45-mils-0-1150-m","title":"DeFelsko F45S1 | PosiTector 6000 F45S Coating Thickness Gauge, Standard | 0–1150 µm, Standard Body","description":"\u003cp\u003eThe DeFelsko F45S1 pairs the PosiTector 6000 F45S probe with the Standard gage body. The F45S is a 45° microprobe for non-magnetic coatings on steel, angled for awkward spots, measuring 0–1150 µm (0–45 mils). It suits painters, fabricators and inspectors checking hard-to-reach steel parts who want quick, repeatable readings and a simple 1,000-reading memory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0–1150 µm (0–45 mils)\u003c\/li\u003e\n\u003cli\u003eAccuracy ±(0.5 µm + 1%) 0–100 µm; ±(2 µm + 3%) \u0026gt;100 µm\u003c\/li\u003e\n\u003cli\u003eSmallest PosiTector 6000 measuring tip, suited to thin films\u003c\/li\u003e\n\u003cli\u003eFor small parts, hard-to-reach areas and close to edges\u003c\/li\u003e\n\u003cli\u003eStandard gage body stores 1,000 readings per probe\u003c\/li\u003e\n\u003cli\u003eFast mode gives 90+ readings per minute\u003c\/li\u003e\n\u003cli\u003e2.8 in colour touchscreen in an IP65-rated enclosure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":42202074972273,"sku":"F45S1","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/5fce38a73e0fae26618477d3_PosiTector-6000-F45S-134x229-Probe-Model-Illustration_4902950f-d4df-4590-95f3-aac43bb6be91.jpg?v=1792807678"},{"product_id":"defelsko-fns1-standard-ferrous-non-ferrous-coating-thickness-gauge-measuring-range-0-60-mils-0-1500-m","title":"DeFelsko FNS1 | PosiTector 6000 FNS Coating Thickness Gauge, Standard | 0–1500 µm, Standard Body","description":"\u003cp\u003eThe DeFelsko FNS1 pairs the PosiTector 6000 FNS probe with the Standard gage body. The FNS is a cabled combination probe for coatings on ferrous and non-ferrous metal substrates, measuring 0–1500 µm (0–60 mils). It suits painters, fabricators and inspectors checking coatings on steel, aluminium and copper who want quick, repeatable readings and a simple 1,000-reading memory.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRange 0–1500 µm (0–60 mils)\u003c\/li\u003e\n\u003cli\u003eAccuracy ±(1 µm + 1%) 0–50 µm; ±(2 µm + 1%) \u0026gt;50 µm\u003c\/li\u003e\n\u003cli\u003eWorks on steel, iron, aluminium, copper and more\u003c\/li\u003e\n\u003cli\u003eZirconia-toughened wear face with ruby tip\u003c\/li\u003e\n\u003cli\u003eStandard gage body stores 1,000 readings per probe\u003c\/li\u003e\n\u003cli\u003eFast mode gives 90+ readings per minute\u003c\/li\u003e\n\u003cli\u003e2.8 in colour touchscreen in an IP65-rated enclosure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":42202075005041,"sku":"FNS1","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/5fce3756513b8874770672a0_PosiTector-6000-FS-134x229-Probe-Model-Illustration_9003c423-1038-4067-af47-e82a87ee8121.jpg?v=1792807678"},{"product_id":"defelsko-lpdspongecpk-sheet-sponges-for-positest-lpd","title":"DeFelsko LPDSPONGECPK | Sheet Sponges for PosiTest LPD | 3 Pack, 20 x 20 cm","description":"\u003cp\u003eThe DeFelsko LPDSPONGECPK is a 3 pack of sheet sponges for the PosiTest LPD low voltage holiday detector. Each 20 x 20 cm (8 x 8 in) sheet can be cut into custom shapes to suit a particular test configuration.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePack of 3 sheet sponges\u003c\/li\u003e\n\u003cli\u003eSheet size 20 x 20 cm (8 x 8 in)\u003c\/li\u003e\n\u003cli\u003eFor cutting custom sponge shapes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":67813391859825,"sku":"LPDSPONGECPK","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/LPD-Sponges.jpg?v=1792806042"},{"product_id":"defelsko-lpdspongerpk-roller-sponges-for-positest-lpd","title":"DeFelsko LPDSPONGERPK | Roller Sponges for PosiTest LPD | 12 Pack","description":"\u003cp\u003eThe DeFelsko LPDSPONGERPK provides twelve roller sponges for the PosiTest LPD low voltage holiday detector, for use with the roller sponge hardware.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePack of 12 roller sponges\u003c\/li\u003e\n\u003cli\u003eFits the PosiTest LPD roller sponge hardware\u003c\/li\u003e\n\u003cli\u003eReplacement sponges for low voltage holiday testing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":67813391892593,"sku":"LPDSPONGERPK","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/LPD-Sponges_4d0acfde-1042-4fd9-8c97-2b2450264271.jpg?v=1792806044"},{"product_id":"defelsko-lpdspongespk-rectangle-sponges-for-positest-lpd","title":"DeFelsko LPDSPONGESPK | Rectangle Sponges for PosiTest LPD | 3 Pack","description":"\u003cp\u003eThe DeFelsko LPDSPONGESPK is a 3 pack of rectangle sponges for the PosiTest LPD, made for the rectangle sponge hardware supplied with PosiTest LPD kits.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePack of 3 rectangle sponges\u003c\/li\u003e\n\u003cli\u003eFor the rectangle sponge hardware\u003c\/li\u003e\n\u003cli\u003eRectangle sponge hardware is included with PosiTest LPD kits\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":67813391925361,"sku":"LPDSPONGESPK","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/LPD-Sponges_593b4f3d-7c39-4b46-b8de-5e04c31e73fa.jpg?v=1792806045"},{"product_id":"defelsko-hhdpaddle-conductive-rubber-paddle-for-positest-hhd","title":"DeFelsko HHDPADDLE | Conductive Rubber Paddle for PosiTest HHD | 102 mm (4 in)","description":"\u003cp\u003eThe DeFelsko HHDPADDLE is a 102 mm (4 in) conductive rubber paddle used with rolling spring electrodes on the PosiTest HHD to pinpoint holidays on pipe. After an alarm, the spring is moved about 3 cm (1 in) away, the paddle is held against it parallel to the pipe axis and moved around the circumference until a spark and alarm locate the flaw. Use with caution: touching the electrode can cause an electric shock.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e102 mm (4 in) conductive rubber paddle\u003c\/li\u003e\n\u003cli\u003eUsed with rolling spring electrodes\u003c\/li\u003e\n\u003cli\u003eHelps precisely locate holidays on pipe\u003c\/li\u003e\n\u003cli\u003eCaution: accidental contact with the electrode may cause a shock\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":67813393498225,"sku":"HHDPADDLE","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/HHD-RubberPaddle.jpg?v=1792806125"},{"product_id":"defelsko-sstdiwater-deionized-water-for-positector-sst","title":"DeFelsko SSTDIWATER | Deionized Water for PosiTector SST | 250 mL","description":"\u003cp\u003eThe DeFelsko SSTDIWATER is a 250 mL bottle of purified, ion-free deionized water for use with the PosiTector SST soluble salt tester. DeFelsko also offers the same water in a larger 1 L bottle (SSTDIWATER1L) for users who test more often.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVolume: 250 mL\u003c\/li\u003e\n\u003cli\u003ePurified, ion-free water\u003c\/li\u003e\n\u003cli\u003eFor use with the PosiTector SST\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":67813393530993,"sku":"SSTDIWATER","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/DI-water.jpg?v=1792806126"},{"product_id":"defelsko-sstdiwater1l-deionized-water-for-positector-sst","title":"DeFelsko SSTDIWATER1L | Deionized Water for PosiTector SST | 1 L","description":"\u003cp\u003eThe DeFelsko SSTDIWATER1L supplies 1 L of purified, ion-free deionized water for the PosiTector SST soluble salt tester. It is the larger of the two bottle sizes DeFelsko offers, alongside the 250 mL SSTDIWATER.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVolume: 1 L\u003c\/li\u003e\n\u003cli\u003ePurified, ion-free water\u003c\/li\u003e\n\u003cli\u003eLarger alternative to the 250 mL SSTDIWATER\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":67813393563761,"sku":"SSTDIWATER1L","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/DI-water_617d14f4-ca7e-4445-b36d-9a03bf80d218.jpg?v=1792806128"},{"product_id":"defelsko-dolly10-10-mm-dollies-for-positest-at","title":"DeFelsko DOLLY10 | 10 mm Dollies for PosiTest AT | Pack of 10","description":"\u003cp\u003eThe DeFelsko DOLLY10 is a pack of ten 10 mm dollies (pull stubs) for PosiTest AT pull-off adhesion testers. The small 10 mm face concentrates the pull force, giving the highest pressure range of the standard dolly sizes for very strong coatings on metal. The 20 mm stand-off is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePack of 10 x 10 mm dollies\u003c\/li\u003e\n\u003cli\u003eSuited to very high bond strength coatings on metals\u003c\/li\u003e\n\u003cli\u003ePosiTest AT-M range with this dolly: 2.8 to 70 MPa \/ 400 to 10,000 psi\u003c\/li\u003e\n\u003cli\u003ePosiTest AT-A range with this dolly: 2.8 to 96 MPa \/ 400 to 14,000 psi\u003c\/li\u003e\n\u003cli\u003e20 mm stand-off required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":67813393629297,"sku":"DOLLY10","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/5d54108e2086e77a1e320e2e_AT-dollies.jpg?v=1792806131"},{"product_id":"defelsko-dolly10apk100-10-mm-dollies-for-positest-at","title":"DeFelsko DOLLY10APK100 | 10 mm Dollies for PosiTest AT | Pack of 100","description":"\u003cp\u003ePacked as a multipack of 100, the DeFelsko DOLLY10APK100 supplies 10 mm dollies for PosiTest AT adhesion testers in larger volume for frequent testing. These small loading fixtures are intended for very high bond strength coatings on metal and are pulled using the 20 mm stand-off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePack of 100 x 10 mm dollies\u003c\/li\u003e\n\u003cli\u003eSuited to very high bond strength coatings on metals\u003c\/li\u003e\n\u003cli\u003ePosiTest AT-M range with this dolly: 2.8 to 70 MPa \/ 400 to 10,000 psi\u003c\/li\u003e\n\u003cli\u003ePosiTest AT-A range with this dolly: 2.8 to 96 MPa \/ 400 to 14,000 psi\u003c\/li\u003e\n\u003cli\u003e20 mm stand-off required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":67813393662065,"sku":"DOLLY10APK100","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/5d54108e2086e77a1e320e2e_AT-dollies_b46d670c-a5ca-4efe-a062-7f6de09a4b47.jpg?v=1792806133"},{"product_id":"defelsko-dolly14-14-mm-dollies-for-positest-at","title":"DeFelsko DOLLY14 | 14 mm Dollies for PosiTest AT | Pack of 10","description":"\u003cp\u003eThe DeFelsko DOLLY14 contains ten 14 mm dollies for the PosiTest AT series. Glued to the coated surface and pulled with the 20 mm stand-off, they are used to test the adhesion of very high bond strength coatings on metallic substrates.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePack of 10 x 14 mm dollies\u003c\/li\u003e\n\u003cli\u003eSuited to very high bond strength coatings on metals\u003c\/li\u003e\n\u003cli\u003ePosiTest AT-M range with this dolly: 1.4 to 40 MPa \/ 200 to 6,000 psi\u003c\/li\u003e\n\u003cli\u003ePosiTest AT-A range with this dolly: 1.4 to 50 MPa \/ 200 to 7,000 psi\u003c\/li\u003e\n\u003cli\u003e20 mm stand-off required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":67813393694833,"sku":"DOLLY14","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/5d54108e2086e77a1e320e2e_AT-dollies_caf2f2b8-18ec-4d70-8f41-ab4a66cb82fc.jpg?v=1792806134"},{"product_id":"defelsko-dolly14apk100-14-mm-dollies-for-positest-at","title":"DeFelsko DOLLY14APK100 | 14 mm Dollies for PosiTest AT | Pack of 100","description":"\u003cp\u003eFor high-volume adhesion work, the DeFelsko DOLLY14APK100 is a 100-piece multipack of 14 mm dollies for PosiTest AT testers. The 14 mm pull stubs suit very high bond strength coatings on metals and are used with the PosiTest AT 20 mm stand-off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePack of 100 x 14 mm dollies\u003c\/li\u003e\n\u003cli\u003eSuited to very high bond strength coatings on metals\u003c\/li\u003e\n\u003cli\u003ePosiTest AT-M range with this dolly: 1.4 to 40 MPa \/ 200 to 6,000 psi\u003c\/li\u003e\n\u003cli\u003ePosiTest AT-A range with this dolly: 1.4 to 50 MPa \/ 200 to 7,000 psi\u003c\/li\u003e\n\u003cli\u003e20 mm stand-off required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":67813393727601,"sku":"DOLLY14APK100","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/5d54108e2086e77a1e320e2e_AT-dollies_fa6efa86-0c50-4bd5-a9a0-db96fec106c6.jpg?v=1792806135"},{"product_id":"defelsko-dolly20-20-mm-dollies-for-positest-at","title":"DeFelsko DOLLY20 | 20 mm Dollies for PosiTest AT | Pack of 10","description":"\u003cp\u003eThe DeFelsko DOLLY20 is a 10 pack of 20 mm dollies for PosiTest AT adhesion testers, the size used for higher bond strength coatings on metals above 3.4 MPa (500 psi). They are pulled with the 20 mm stand-off fitted.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePack of 10 x 20 mm dollies\u003c\/li\u003e\n\u003cli\u003eSuited to higher bond strength coatings on metals (above 3.4 MPa \/ 500 psi)\u003c\/li\u003e\n\u003cli\u003ePosiTest AT-M range with this dolly: 0.7 to 20 MPa \/ 100 to 3,000 psi\u003c\/li\u003e\n\u003cli\u003ePosiTest AT-A range with this dolly: 0.7 to 24 MPa \/ 100 to 3,500 psi\u003c\/li\u003e\n\u003cli\u003e20 mm stand-off required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":67813393760369,"sku":"DOLLY20","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/5d54108e2086e77a1e320e2e_AT-dollies_c4e0a84b-3f2a-4c99-8cfe-b98e9ee8f2c1.jpg?v=1792806137"},{"product_id":"defelsko-dolly20apk100-20-mm-dollies-for-positest-at","title":"DeFelsko DOLLY20APK100 | 20 mm Dollies for PosiTest AT | Pack of 100","description":"\u003cp\u003eThe DeFelsko DOLLY20APK100 is a multipack of 100 x 20 mm dollies for PosiTest AT instruments, suited to teams running frequent pull-off tests on coated metal. The 20 mm size covers higher bond strength coatings above 3.4 MPa (500 psi) and needs the 20 mm stand-off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePack of 100 x 20 mm dollies\u003c\/li\u003e\n\u003cli\u003eSuited to higher bond strength coatings on metals (above 3.4 MPa \/ 500 psi)\u003c\/li\u003e\n\u003cli\u003ePosiTest AT-M range with this dolly: 0.7 to 20 MPa \/ 100 to 3,000 psi\u003c\/li\u003e\n\u003cli\u003ePosiTest AT-A range with this dolly: 0.7 to 24 MPa \/ 100 to 3,500 psi\u003c\/li\u003e\n\u003cli\u003e20 mm stand-off required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":67813393793137,"sku":"DOLLY20APK100","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/5d54108e2086e77a1e320e2e_AT-dollies_88b2331c-3554-4615-9435-e55d0c1d5c57.jpg?v=1792806138"},{"product_id":"defelsko-dolly50-50-mm-dollies-for-positest-at","title":"DeFelsko DOLLY50 | 50 mm Dollies for PosiTest AT | Pack of 4","description":"\u003cp\u003eThe DeFelsko DOLLY50 is a pack of four 50 mm dollies for PosiTest AT pull-off testers. The large face spreads the load for lower bond strength finishes, such as coatings on wood, concrete and plastic, and is pulled with the 50 mm stand-off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePack of 4 x 50 mm dollies\u003c\/li\u003e\n\u003cli\u003eSuited to lower bond strength coatings on wood, concrete and plastic\u003c\/li\u003e\n\u003cli\u003ePosiTest AT-M range with this dolly: 0.1 to 3.3 MPa \/ 16 to 480 psi\u003c\/li\u003e\n\u003cli\u003ePosiTest AT-A range with this dolly: 0.1 to 3.8 MPa \/ 16 to 560 psi\u003c\/li\u003e\n\u003cli\u003e50 mm stand-off required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":67813393825905,"sku":"DOLLY50","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/5d54108e2086e77a1e320e2e_AT-dollies_b3cbfb30-26dd-4c64-8acc-f767ba7ab322.jpg?v=1792806140"},{"product_id":"defelsko-dolly50apk50-50-mm-dollies-for-positest-at","title":"DeFelsko DOLLY50APK50 | 50 mm Dollies for PosiTest AT | Pack of 50","description":"\u003cp\u003eSupplied as a 50-piece multipack, the DeFelsko DOLLY50APK50 provides 50 mm dollies for PosiTest AT adhesion testing on weaker bonds. The 50 mm size is used for coatings on wood, concrete and plastic and requires the 50 mm stand-off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePack of 50 x 50 mm dollies\u003c\/li\u003e\n\u003cli\u003eSuited to lower bond strength coatings on wood, concrete and plastic\u003c\/li\u003e\n\u003cli\u003ePosiTest AT-M range with this dolly: 0.1 to 3.3 MPa \/ 16 to 480 psi\u003c\/li\u003e\n\u003cli\u003ePosiTest AT-A range with this dolly: 0.1 to 3.8 MPa \/ 16 to 560 psi\u003c\/li\u003e\n\u003cli\u003e50 mm stand-off required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":67813393858673,"sku":"DOLLY50APK50","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/5d54108e2086e77a1e320e2e_AT-dollies_1299eed4-626f-4783-b706-35ae019750a7.jpg?v=1792806142"},{"product_id":"defelsko-dolly50c-50-mm-c1583-dollies-for-positest-at","title":"DeFelsko DOLLY50C | 50 mm C1583 Dollies for PosiTest AT | Pack of 2","description":"\u003cp\u003eThe DeFelsko DOLLY50C is a pack of two 50 mm C1583 dollies for the PosiTest AT. They are designed for testing the bond strength of concrete surfaces and cementitious overlays per ASTM C1583 and EN 1542, and are pulled with the 50 mm C1583 stand-off.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePack of 2 x 50 mm C1583 dollies\u003c\/li\u003e\n\u003cli\u003eFor concrete surfaces and cementitious overlays per ASTM C1583 and EN 1542\u003c\/li\u003e\n\u003cli\u003ePosiTest AT-M range with this dolly: 0.1 to 3.3 MPa \/ 16 to 480 psi\u003c\/li\u003e\n\u003cli\u003ePosiTest AT-A range with this dolly: 0.1 to 3.8 MPa \/ 16 to 560 psi\u003c\/li\u003e\n\u003cli\u003e50 mm C1583 stand-off required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":67813393891441,"sku":"DOLLY50C","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/5d54108e2086e77a1e320e2e_AT-dollies_8ccbfdad-6483-434f-bbcf-5bb053830de7.jpg?v=1792806143"},{"product_id":"defelsko-dolly50t-50-x-50-mm-tile-dollies-for-positest-at","title":"DeFelsko DOLLY50T | 50 x 50 mm Tile Dollies for PosiTest AT | Pack of 4","description":"\u003cp\u003eThe DeFelsko DOLLY50T is a pack of four 50 x 50 mm square dollies for testing cementitious tile adhesives with a PosiTest AT, per EN 12004-2. Each dolly comes complete with four plates and reusable threaded posts, and the 50 x 50 mm tile stand-off is required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePack of 4 x 50 x 50 mm tile dollies\u003c\/li\u003e\n\u003cli\u003eFor cementitious tile adhesives per EN 12004-2\u003c\/li\u003e\n\u003cli\u003eSupplied complete with 4 plates and reusable threaded posts\u003c\/li\u003e\n\u003cli\u003ePosiTest AT-M range: 0.1 to 2.585 MPa \/ 13 to 375 psi\u003c\/li\u003e\n\u003cli\u003ePosiTest AT-A range: 0.1 to 3.0 MPa \/ 13 to 440 psi\u003c\/li\u003e\n\u003cli\u003e50 x 50 mm tile stand-off required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":67813393924209,"sku":"DOLLY50T","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/5d54108e2086e77a1e320e2e_AT-dollies_1120fcae-2c75-4f54-9487-5839e9f5b706.jpg?v=1792806145"},{"product_id":"defelsko-tmpltas-drilling-template-for-50-mm-dollies","title":"DeFelsko TMPLTAS | Drilling Template for 50 mm Dollies | PosiTest AT, 10 Drill Bits","description":"\u003cp\u003eThe DeFelsko TMPLTAS drilling template kit is used with 50 mm dollies on the PosiTest AT to isolate the test area before a pull-off test. It is particularly suited to thicker coatings on concrete, where the test area needs to be separated from the surrounding coating.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDrilling template for isolating the test area around 50 mm dollies\u003c\/li\u003e\n\u003cli\u003eSuited to thicker coatings on concrete\u003c\/li\u003e\n\u003cli\u003eSupplied with ten 4 mm (5\/32 in) drill bits\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeFelsko","offers":[{"title":"Default Title","offer_id":67813393989745,"sku":"TMPLTAS","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/drilling-template.jpg?v=1792806148"}],"url":"https:\/\/www.generaltechshop.ae\/collections\/measurement-coating-inspection-instruments.oembed","provider":"General Tech Services LLC","version":"1.0","type":"link"}