{"title":"Temperature Measurement Accessories","description":null,"products":[{"product_id":"thermapen-blue-glow-in-the-dark-protective-boot","title":"ETI 830-620 | Thermapen Blue Glow-in-the-Dark Cover | Silicone, Magnets, Lanyard","description":"\u003cp\u003eMade for the Thermapen Blue, the ETI 830-620 is a glow-in-the-dark silicone rubber cover that helps protect the thermometer from accidental damage and makes it easier to find in low light, for example in a dim kitchen or a cold store. Magnets built into the rear let it sit on metal surfaces, and a lanyard allows it to be worn around the neck or hung up.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits the Thermapen Blue thermometer\u003c\/li\u003e\n\u003cli\u003eGlows in the dark\u003c\/li\u003e\n\u003cli\u003eDurable silicone rubber\u003c\/li\u003e\n\u003cli\u003eIntegrated rear magnets\u003c\/li\u003e\n\u003cli\u003eLanyard for wearing or hanging\u003c\/li\u003e\n\u003cli\u003e158 x 50 x 20 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"eti","offers":[{"title":"Default Title","offer_id":42170365444209,"sku":"830-620","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/eti-thermometers-default-title-thermapen-blue-glow-in-the-dark-protective-boot-25382309462129.png?v=1761749359"},{"product_id":"palmer-wahl-1237x-xxx-digi-stem-dst600-dst640-replacement-probe-cable","title":"Palmer Wahl 1237X-XXX | Digi-Stem DST600 \u0026 DST640 Replacement Probe Cable | Six-Conductor","description":"\u003cp\u003eThe 1237X-XXX cables are six-conductor replacements that connect a Digi-Stem DST600 or DST640 series meter to its remote probe; they do not work with other meter series. Part numbers 12370 to 12377 define the meter-side and probe-side connectors, and the cable length is specified in metres when ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12370: straight quick disconnect at both ends\u003c\/li\u003e\n\u003cli\u003e12373: 90° angle quick disconnect at both ends\u003c\/li\u003e\n\u003cli\u003e12374 and 12375: mixed straight and 90° ends\u003c\/li\u003e\n\u003cli\u003e12371, 12372, 12376, 12377: one end bare wires, factory installation required\u003c\/li\u003e\n\u003cli\u003eStraight quick disconnects in standard or moulded form; all 90° versions are moulded\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOn 12371 and 12376 a replacement probe and system calibration may be needed.\u003c\/p\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715247439985,"sku":"1237X-XXX","price":0.0,"currency_code":"AED","in_stock":true}]},{"product_id":"palmer-wahl-24801-digi-stem-advanced-data-logging-software","title":"Palmer Wahl 24801 | Digi-Stem Advanced Data Logging Software | Excel Export, Windows","description":"\u003cp\u003ePalmer Wahl 24801 is the data logging software for the Digi-Stem Advanced Series: DSP Series digital process pressure gauges and DST700 Series advanced RTD digital thermometers. It comes as standard with those meters and lets you download the time-stamped readings held in the meter memory to a Windows PC for process monitoring, maintenance, quality records and trend analysis.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeter memory holds up to 1 million date and time-stamped points\u003c\/li\u003e\n\u003cli\u003e10 s default interval, with 20 to 600 s presets selected from the DST700 keypad\u003c\/li\u003e\n\u003cli\u003eExports logged data to an Excel spreadsheet\u003c\/li\u003e\n\u003cli\u003eGraph view with zoom, pan and snapshot tools\u003c\/li\u003e\n\u003cli\u003eSupplied on a USB flash drive with installation files and user guide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715247767665,"sku":"24801","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/data_logger_1.png?v=1792285420"},{"product_id":"palmer-wahl-1238x-xxx-digi-stem-dst610-to-dst661-replacement-probe-cable","title":"Palmer Wahl 1238X-XXX | Digi-Stem DST610 to DST661 Replacement Probe Cable | Ten-Conductor","description":"\u003cp\u003ePalmer Wahl 1238X-XXX ten-conductor cables connect DST610, DST611, DST620, DST621, DST650, DST651, DST660 or DST661 series Digi-Stem meters to their remote probe, and are not used with other series. Ten-conductor cables are made only with moulded connectors. Part numbers 12380 to 12387 set the connector on each end, with length specified in metres at order.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12380: straight quick disconnect both ends\u003c\/li\u003e\n\u003cli\u003e12383: 90° angle quick disconnect both ends\u003c\/li\u003e\n\u003cli\u003e12384 and 12385: one straight and one 90° end\u003c\/li\u003e\n\u003cli\u003e12381, 12382, 12386, 12387: bare wires at one end, installed at the factory\u003c\/li\u003e\n\u003cli\u003e12381 and 12386 may need a replacement probe and system calibration\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715247800433,"sku":"1238X-XXX","price":0.0,"currency_code":"AED","in_stock":true}]},{"product_id":"palmer-wahl-dsa3030-digi-stem-wall-mount-bracket","title":"Palmer Wahl DSA3030 | Digi-Stem Wall Mount Bracket | 400, 500 \u0026 600 Series","description":"\u003cp\u003eThe Palmer Wahl DSA3030 wall mount bracket fits Digi-Stem meters in the 400, 500 and 600 series. It is intended for systems with remote probes, letting you mount the meter in a convenient spot near the process where the display is easy to read.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWall mounting for Digi-Stem meters\u003c\/li\u003e\n\u003cli\u003eFits 400, 500 and 600 series\u003c\/li\u003e\n\u003cli\u003eFor use with remote probe systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715247964273,"sku":"DSA3030","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/DSA3030_ANGLE.jpg?v=1792285461"},{"product_id":"palmer-wahl-12436-32-rtd-connector-lemo-4-pin","title":"Palmer Wahl 12436-32 | RTD Connector, Lemo 4-Pin | TC622A, TM612A, TM630A","description":"\u003cp\u003ePalmer Wahl 12436-32 is a Lemo 4-pin RTD connector for the TC622A calibrator. It is also compatible with the TM612A and TM630A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLemo 4-pin RTD connector\u003c\/li\u003e\n\u003cli\u003eFor TC622A, TM612A and TM630A\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715251863665,"sku":"12436-32","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/TMA_TCA_4-Pin_Connectors_TopView_small_90a4598e-2867-42ff-95b5-323c08dd1042.jpg?v=1792285494"},{"product_id":"palmer-wahl-12423-04-hard-sided-carry-case","title":"Palmer Wahl 12423-04 | Hard Sided Carry Case | Polyethylene, 21 x 16.5 x 6 in","description":"\u003cp\u003eThe 12423-04 is a large black polyethylene hard carry case, 21 x 16.5 x 6 in, for High Performance Heat Spy infrared thermometers (DHSA24, DHSA26, DHSA28, DHS29 and DHS35 Series). It also takes Heat-Prober meters with probes up to 12 in long, C Series calibrators or the T150 calibrator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCrushproof hinged case with two stay-closed latches\u003c\/li\u003e\n\u003cli\u003ePerimeter seal keeps out dust\u003c\/li\u003e\n\u003cli\u003eResistant to oils, fuels and solvents\u003c\/li\u003e\n\u003cli\u003eBuilt-in padlock holes (padlock not included)\u003c\/li\u003e\n\u003cli\u003eAutomatic air purge for pressure equalisation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715251929201,"sku":"12423-04","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/12423-04.jpg?v=1792285494"},{"product_id":"palmer-wahl-11681-1-replacement-nicad-battery-pack","title":"Palmer Wahl 11681-1 | Replacement NiCad Battery Pack | For Heat-Prober Meters","description":"\u003cp\u003ePalmer Wahl 11681-1 is a replacement rechargeable NiCad battery pack for Heat-Prober meters designed to use NiCad packs: the 1770, 3200, 2500, 1370, TCMR, 700, 392 and 392A series. This is the battery only; the MA-150 or MA-150E charger is sold separately.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRechargeable NiCad pack\u003c\/li\u003e\n\u003cli\u003eFor 1770, 3200, 2500 and 1370 series meters\u003c\/li\u003e\n\u003cli\u003eAlso fits TCMR, 700, 392 and 392A series\u003c\/li\u003e\n\u003cli\u003eCharger MA-150 or MA-150E sold separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715252060273,"sku":"11681-1","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/11681-1.jpg?v=1792285517"},{"product_id":"palmer-wahl-11681-2-replacement-nicad-battery-pack","title":"Palmer Wahl 11681-2 | Replacement NiCad Battery Pack | For Discontinued Heat-Prober 392S","description":"\u003cp\u003eThe Palmer Wahl 11681-2 is a replacement rechargeable NiCad battery pack for the discontinued Heat-Prober 392S, a model designed to run on NiCad packs. It is supplied as the battery only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRechargeable NiCad pack\u003c\/li\u003e\n\u003cli\u003eFor Heat-Prober 392S meters (model discontinued)\u003c\/li\u003e\n\u003cli\u003eBattery only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715252256881,"sku":"11681-2","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/Website_Image_Coming_Soon.jpg?v=1792285525"},{"product_id":"palmer-wahl-12423-06-watertight-hardsided-carry-case","title":"Palmer Wahl 12423-06 | Watertight Hardsided Carry Case | For DHS520 and Heat-Prober, 34 x 25 x 15 cm","description":"\u003cp\u003eThe 12423-06 is a compact hardsided equipment case, 13.49 x 9.89 x 6 in (34.26 x 25.12 x 15.24 cm), for the DHS520 or Heat-Prober meters with probes up to 8 in long. It is watertight, airtight and crush resistant.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWatertight, airtight and crush resistant\u003c\/li\u003e\n\u003cli\u003eMoulded padlock holes\u003c\/li\u003e\n\u003cli\u003eOne carry handle and two latches\u003c\/li\u003e\n\u003cli\u003eBlack, approx. 2.44 kg (5.38 lb)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715252322417,"sku":"12423-06","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/12423-06.jpg?v=1792285548"},{"product_id":"palmer-wahl-12436-07-replacement-usb-cable-for-datacal","title":"Palmer Wahl 12436-07 | Replacement USB Cable for DATACAL | 6 ft, 5-Pin Mini","description":"\u003cp\u003eThe 12436-07 is a 6 ft, 5-pin USB cable with mini connectors, supplied as a replacement for the cable that comes with DATACAL software.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6 ft length\u003c\/li\u003e\n\u003cli\u003e5-pin mini USB connectors\u003c\/li\u003e\n\u003cli\u003eReplaces the DATACAL software cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715252355185,"sku":"12436-07","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/Website_Image_Coming_Soon_95b34bfd-9681-4b52-9dab-bc0675c1b373.jpg?v=1792285548"},{"product_id":"palmer-wahl-12436-01-rechargeable-battery-pack-charger","title":"Palmer Wahl 12436-01 | Rechargeable Battery Pack\/Charger | TC, TM Series \u0026 P32, 110 V US Plug","description":"\u003cp\u003ePalmer Wahl 12436-01 is a rechargeable battery pack\/charger for TC Series and TM Series instruments and the P32. It is fitted with a 110 V American (USA) plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRechargeable battery pack with charger\u003c\/li\u003e\n\u003cli\u003eFor TC621, TC622 and TC622A\u003c\/li\u003e\n\u003cli\u003eFor TM602, TM612\/TM612A and TM630\/TM630A\u003c\/li\u003e\n\u003cli\u003eFor the P32\u003c\/li\u003e\n\u003cli\u003e110 V USA plug\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715252420721,"sku":"12436-01","price":0.0,"currency_code":"AED","in_stock":true}]},{"product_id":"palmer-wahl-12436-16-test-leads-4-mm-safety-banana-plugs","title":"Palmer Wahl 12436-16 | Test Leads, 4 mm Safety Banana Plugs | Removable Alligator Clips","description":"\u003cp\u003eThe Palmer Wahl 12436-16 is a pair of test leads with 4 mm safety banana plugs and removable alligator clips. It works with the TC621, TC622, TC622A, TM612A, TM630, TM630A and P32, and with the C50, C75, C100, C150 and T150 calibrators.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSupplied as a pair\u003c\/li\u003e\n\u003cli\u003e4 mm safety banana plugs\u003c\/li\u003e\n\u003cli\u003eRemovable alligator clips\u003c\/li\u003e\n\u003cli\u003eCompatible with TC, TM, P32, C and T150 instruments\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715252453489,"sku":"12436-16","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/Website_Image_Coming_Soon_9ebbb9d0-2cc7-4406-8e0f-b83224c08a60.jpg?v=1792285565"},{"product_id":"palmer-wahl-12436-04-rtd-connector-m8x1-4-pin","title":"Palmer Wahl 12436-04 | RTD Connector, M8x1 4-Pin | TC622, TM612, TM630","description":"\u003cp\u003eThe Palmer Wahl 12436-04 is an M8x1, 4-pin RTD connector for the TC622 calibrator. It is also compatible with the TM612 and TM630.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eM8x1, 4-pin RTD connector\u003c\/li\u003e\n\u003cli\u003eFor TC622, TM612 and TM630\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715252519025,"sku":"12436-04","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/TM_TC_4-Pin_Connectors_TopView_small_ad091272-5c7d-46cc-aa16-a8a086d5fb86.jpg?v=1792285573"},{"product_id":"palmer-wahl-12436-18-datacal-calibration-software-with-usb-cable","title":"Palmer Wahl 12436-18 | DATACAL Calibration Software with USB Cable | For C\/T Series Calibrators","description":"\u003cp\u003ePalmer Wahl 12436-18 is DATACAL calibration and data management software for C\/T series calibrators, supplied with a 3 ft USB cable. It is used to configure instruments and fully automate calibration procedures, and works with the C75, C100, C150, T150, TC621, TC622A, TM602, TM612A and TM630A.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInstrument configuration and automated calibration procedures\u003c\/li\u003e\n\u003cli\u003eCalibration data management with graphical and table display\u003c\/li\u003e\n\u003cli\u003eCustomisable calibration reports\u003c\/li\u003e\n\u003cli\u003eData export to spreadsheet (.xls) or ASCII\u003c\/li\u003e\n\u003cli\u003eCan be configured for 21 CFR Part 11: user logins, three access levels and audit trail\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe licence permits installation on one computer.\u003c\/p\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715252551793,"sku":"12436-18","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/DATACAL_Instrument-configuration_2.jpg?v=1792285575"},{"product_id":"palmer-wahl-12436-05-light-duty-hard-carry-case","title":"Palmer Wahl 12436-05 | Light Duty Hard Carry Case | For TC Series, TM410 \u0026 P32","description":"\u003cp\u003ePalmer Wahl 12436-05 is a light duty, hard-sided blue carry case with a foam-lined interior and handle, measuring 12.75 x 9.25 x 2.63 in. It fits TC Series meters, the TM410 meter and the P32 calibrator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHard-sided blue shell\u003c\/li\u003e\n\u003cli\u003eFoam lining\u003c\/li\u003e\n\u003cli\u003eCarry handle\u003c\/li\u003e\n\u003cli\u003eFits TC Series, TM410 and P32\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715252650097,"sku":"12436-05","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/Website_Image_Coming_Soon_504c12e4-1c21-4310-98d7-41ef6cffc45f.jpg?v=1792285585"},{"product_id":"palmer-wahl-da-10-black-wrist-strap","title":"Palmer Wahl DA-10 | Black Wrist Strap | For Heat-Prober Meters","description":"\u003cp\u003eThe Palmer Wahl DA-10 is a black wrist strap made for Heat-Prober handheld meters. It is fitted with a metal ring and a clip-on hook, and it is compatible with every Heat-Prober meter, so the instrument stays attached to the user while readings are taken.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlack strap with metal ring\u003c\/li\u003e\n\u003cli\u003eClip-on hook for attaching to the meter\u003c\/li\u003e\n\u003cli\u003eCompatible with all Heat-Prober meters\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715252682865,"sku":"DA-10","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/DA-10.jpg?v=1792285589"},{"product_id":"palmer-wahl-12234-02-3v-lithium-coin-cell-battery","title":"Palmer Wahl 12234-02 | 3V Lithium Coin Cell Battery | TA30 \u0026 TA50 Calibrators","description":"\u003cp\u003eThe Palmer Wahl 12234-02 is a 3 V lithium coin cell style replacement battery for TA30 calibrators (now discontinued) and the newer versions of the TA50 Series plug-in thermocouple field calibrators. Older TA50 units use a different battery, so check which version is in use before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 V lithium coin cell style\u003c\/li\u003e\n\u003cli\u003eFor new-version TA50 Series calibrators\u003c\/li\u003e\n\u003cli\u003eFor discontinued TA30 calibrators\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715259596913,"sku":"12234-02","price":0.0,"currency_code":"AED","in_stock":true}]},{"product_id":"palmer-wahl-12235-7-5v-lithium-coin-cell-battery","title":"Palmer Wahl 12235 | 7.5V Lithium Coin Cell Battery | TA50 \u0026 TA70 Calibrators","description":"\u003cp\u003ePalmer Wahl 12235 is a 7.5 V lithium coin cell style replacement battery for older TA50 Series and TA70 Series plug-in thermocouple field calibrators. Newer TA50 versions take a different battery, so the correct part depends on the TA50 version in use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e7.5 V lithium coin cell style\u003c\/li\u003e\n\u003cli\u003eFor older TA50 Series calibrators\u003c\/li\u003e\n\u003cli\u003eFor TA70 Series calibrators\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715261399153,"sku":"12235","price":0.0,"currency_code":"AED","in_stock":true}]},{"product_id":"palmer-wahl-13500-04-dst500-series-fixed-probe-calibration-cable","title":"Palmer Wahl 13500-04 | DST500 Series Fixed Probe Calibration Cable","description":"\u003cp\u003ePalmer Wahl 13500-04 is a calibration cable for Digi-Stem DST500 Series thermometers with fixed probes. It lets the DST500 meter sit on a workbench during calibration while the probe is installed in a calibration bath.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFor fixed DST500 Series probes\u003c\/li\u003e\n\u003cli\u003eSeparates meter and probe during bath calibration\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715261562993,"sku":"13500-04","price":0.0,"currency_code":"AED","in_stock":true}]},{"product_id":"palmer-wahl-12234-03-spare-aa-lithium-thionyl-chloride-battery","title":"Palmer Wahl 12234-03 | Spare AA Lithium Thionyl Chloride Battery | 3.6 V, 2.4 Ah","description":"\u003cp\u003ePalmer Wahl 12234-03 is a spare 3.6 V lithium thionyl chloride battery in AA size, rated at 2.4 amp hours with 0.66 g lithium content. It suits international \"I\" versions of the DST500 and DST600 Digi-Stem, DST700 and DSP Digi-Stem models with the AA battery holder option, and HSICBB-P models with serial number 37105 or later.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAA size, 3.6 V lithium thionyl chloride\u003c\/li\u003e\n\u003cli\u003e2.4 Ah capacity\u003c\/li\u003e\n\u003cli\u003e0.66 g lithium content\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715263365233,"sku":"12234-03","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/12234-03.jpg?v=1792285768"},{"product_id":"palmer-wahl-13146x-90-elbow-for-rigid-stem-digi-stem-models","title":"Palmer Wahl 13146X | 90° Elbow for Rigid Stem Digi-Stem Models","description":"\u003cp\u003eThe Palmer Wahl 13146X is a 90° elbow for rigid stem Digi-Stem models, allowing the stem to turn back, left or right. It can be used instead of an all-angle or remote cable configuration if preferred, and versions are available for back connection, left side and right side mounts.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTurns a rigid stem through 90°\u003c\/li\u003e\n\u003cli\u003eBack, left side and right side mount versions\u003c\/li\u003e\n\u003cli\u003eAlternative to all-angle or remote cable setups\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715263594609,"sku":"13146X","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/13146X.jpg?v=1792285770"},{"product_id":"palmer-wahl-24040-03-transmitter-cable-for-dsp-and-dst700","title":"Palmer Wahl 24040-03 | Transmitter Cable for DSP and DST700 | M12 8-Pin 90° Connector","description":"\u003cp\u003eCable 24040-03 connects the transmitter output of Palmer Wahl DSP series digital pressure gauges or DST700 series Digi-Stem thermometers to your own equipment. The meter end has a right-angle M12 8-pin connector and the other end is bare wire. Length is made to order in metres, up to 100 m for current output or 3 m for voltage output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eM12 8-pin 90° connector at the meter end\u003c\/li\u003e\n\u003cli\u003eBare wires for customer equipment\u003c\/li\u003e\n\u003cli\u003eLength specified in metres when ordering\u003c\/li\u003e\n\u003cli\u003eMax 100 m (current output) \/ 3 m (voltage output)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715403448433,"sku":"24040-03","price":0.0,"currency_code":"AED","in_stock":true}]},{"product_id":"palmer-wahl-dsa3060-spare-lithium-thionyl-chloride-c-battery","title":"Palmer Wahl DSA3060 | Spare Lithium Thionyl Chloride C Battery | For FM Approved Digi-Stem","description":"\u003cp\u003eThe DSA3060 is the spare C size lithium thionyl chloride battery for FM approved Digi-Stem meters only, such as the DST500-FM, which must be powered by this approved cell. It supplies 3.6 V with a capacity of 7.2 Ah. Because each cell contains 2.5 g of lithium, more than the 2 g threshold, it is regulated for transport and subject to shipping restrictions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFor FM approved Digi-Stem meters only\u003c\/li\u003e\n\u003cli\u003e3.6 V, 7.2 Ah C cell\u003c\/li\u003e\n\u003cli\u003eLithium thionyl chloride chemistry\u003c\/li\u003e\n\u003cli\u003eRegulated for transport\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715638296689,"sku":"DSA3060","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/DSA3060.jpg?v=1792285976"},{"product_id":"palmer-wahl-ca1kmm06-type-k-thermocouple-cable-male-connectors","title":"Palmer Wahl CA1KMM06 | Type K Thermocouple Cable, Male Connectors | 6 ft","description":"\u003cp\u003eThe CA1KMM06 is a 6 ft Type K thermocouple cable from Palmer Wahl with a male Type K connector on each end. It is intended for use with the Heat-Prober T-handle piercing probes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6 ft length\u003c\/li\u003e\n\u003cli\u003eMale Type K connectors on both ends\u003c\/li\u003e\n\u003cli\u003eFor T-handle piercing probes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715640098929,"sku":"CA1KMM06","price":0.0,"currency_code":"AED","in_stock":true}]},{"product_id":"palmer-wahl-dsa3031-digi-stem-wall-mount-bracket","title":"Palmer Wahl DSA3031 | Digi-Stem Wall Mount Bracket | With Grounding Lug","description":"\u003cp\u003ePalmer Wahl DSA3031 is a wall mount bracket for 400, 500 and 600 series Digi-Stem meters that adds a grounding lug. It lets the meter sit in a convenient spot close to the process and is intended for installations that use a remote probe.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntegrated grounding lug\u003c\/li\u003e\n\u003cli\u003eFits 400, 500 and 600 series Digi-Stems\u003c\/li\u003e\n\u003cli\u003eSuited to meters used with remote probes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715735519345,"sku":"DSA3031","price":0.0,"currency_code":"AED","in_stock":true}]},{"product_id":"palmer-wahl-dsa3030st-digi-stem-wall-mount-bracket","title":"Palmer Wahl DSA3030ST | Digi-Stem Wall Mount Bracket | For DST700","description":"\u003cp\u003ePalmer Wahl DSA3030ST is a wall mount bracket for 700 Series Digi-Stem meters. It is intended for installations using a remote probe, letting the meter be fixed in a convenient spot close to the process while the probe sits elsewhere.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 700 Series Digi-Stem meters\u003c\/li\u003e\n\u003cli\u003eSuited to remote probe installations\u003c\/li\u003e\n\u003cli\u003eAllows wall mounting of the meter near the process\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715738927217,"sku":"DSA3030ST","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/DSA3030_ANGLE_fa1dd32b-8f83-4bc9-b720-d0e58509405d.jpg?v=1792286024"},{"product_id":"palmer-wahl-dsa3032-digi-stem-security-screw-kit","title":"Palmer Wahl DSA3032 | Digi-Stem Security Screw Kit | Screws, Washers \u0026 Wire Seal","description":"\u003cp\u003eThe Palmer Wahl DSA3032 security screw kit secures Digi-Stem meters against tampering. It contains screws, washers, a security wire seal and instructions. Meters ordered with this option come with the kit already fitted, so the separate kit is for retrofitting or replacement.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes screws, washers and a security wire seal\u003c\/li\u003e\n\u003cli\u003eInstructions supplied\u003c\/li\u003e\n\u003cli\u003eFor Digi-Stem meters\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715747446897,"sku":"DSA3032","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/DSA3032.jpg?v=1792286036"},{"product_id":"palmer-wahl-dsa3062-spare-c-lithium-thionyl-chloride-battery","title":"Palmer Wahl DSA3062 | Spare C Lithium Thionyl Chloride Battery | 3.6 V, 8.5 Ah","description":"\u003cp\u003eFor Digi-Stem meters that take a C cell, Palmer Wahl DSA3062 is the spare 3.6 V lithium thionyl chloride battery, rated at 8.5 Ah and 30.6 Wh. It suits all Digi-Stem meters apart from FM approved models. With 2.42 g of lithium, more than 2 g, this cell is regulated for transport.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eC cell size, 3.6 V\u003c\/li\u003e\n\u003cli\u003e8.5 Ah capacity, 30.6 Wh energy\u003c\/li\u003e\n\u003cli\u003eFits all Digi-Stem meters except FM approved versions\u003c\/li\u003e\n\u003cli\u003eSubject to shipping restrictions due to lithium content\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715783852145,"sku":"DSA3062","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/DSA3062.jpg?v=1792286083"},{"product_id":"palmer-wahl-rb825-replacement-band-for-rtc825-surface-probe","title":"Palmer Wahl RB825 | Replacement Band for RTC825 Surface Probe | Type K, to 600 °F","description":"\u003cp\u003ePalmer Wahl RB825 is a single flexible spare band for the RTC825 heavy duty curved surface band probe. The band is 0.25 in wide and 5 in long and uses a Type K thermocouple sensor rated to 600 °F. It is intended to be placed in static or sliding contact with the surface being measured.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlexible band for curved surfaces\u003c\/li\u003e\n\u003cli\u003eType K thermocouple sensor\u003c\/li\u003e\n\u003cli\u003eRated to 600 °F\u003c\/li\u003e\n\u003cli\u003eResponds in 12 s on a clean hot plate\u003c\/li\u003e\n\u003cli\u003eStatic or sliding contact use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715788865649,"sku":"RB825","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/RB825.jpg?v=1792286119"},{"product_id":"palmer-wahl-dstcal-digi-stem-calibration-software-kit","title":"Palmer Wahl DSTCAL | Digi-Stem Calibration Software Kit | Windows, USB Interface","description":"\u003cp\u003ePalmer Wahl DSTCAL is the calibration and configuration software kit for Digi-Stem process thermometers. Besides the software, the kit contains a USB cable, a DST\/USB interface module and a Digi-Stem serial interface cable. On-screen prompts walk the user through each task, from adjusting the display rate to calibrating a meter against its probe. It runs on Windows only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSample\/display rate adjustable from 0.25 to 10 seconds in 0.25 s steps (default 2 s); slower rates extend battery life\u003c\/li\u003e\n\u003cli\u003eProbe R0 compensation to match meter calibration to the probe\u003c\/li\u003e\n\u003cli\u003eProbe authorisation so a replacement probe can work with the existing meter\u003c\/li\u003e\n\u003cli\u003eMeter calibration of the resistance measurement circuits using precision resistances\u003c\/li\u003e\n\u003cli\u003eSystem calibration of a sensor's R0 value using an ice bath\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715789062257,"sku":"DSTCAL","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/DSTCAL.jpg?v=1792286126"},{"product_id":"palmer-wahl-ma-150-heat-prober-battery-recharger","title":"Palmer Wahl MA-150 | Heat-Prober Battery Recharger | 120 VAC \/ 220 VAC","description":"\u003cp\u003eThe Palmer Wahl MA-150 recharges battery pack 11681-1 used across the Heat-Prober meter range, including 1770, 3200, 2500, 1370, TCMR, 700, 392 and 392A series meters. Two versions are offered: MA-150 for 120 VAC with a USA plug and MA-150E for 220 VAC with a European plug.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCharges battery pack 11681-1\u003c\/li\u003e\n\u003cli\u003eMA-150: 120 VAC, 50\/60 Hz, USA plug\u003c\/li\u003e\n\u003cli\u003eMA-150E: 220 VAC, 50\/60 Hz, European plug\u003c\/li\u003e\n\u003cli\u003eCovers eight Heat-Prober meter series\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715789291633,"sku":"MA-150","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/MA-150.jpg?v=1792286162"},{"product_id":"palmer-wahl-tc829-heavy-duty-extension-handle-for-rtc-probes","title":"Palmer Wahl TC829 | Heavy Duty Extension Handle for RTC Probes | 12 to 48 in, Type K","description":"\u003cp\u003ePalmer Wahl TC829 is a heavy duty extension handle for the RTC series of screw-on replaceable Type K probes, built for rugged, long-reach measurements. It has an articulated head, a powder coated aluminium handle with a contoured grip, and a 3 ft stainless steel armoured cable ending in an ANSI mini-connector. The handle works with any Palmer Wahl Heat-Prober Type K meter and comes in 12, 24, 36 or 48 in lengths.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eArticulated head\u003c\/li\u003e\n\u003cli\u003eLengths of 12, 24, 36 or 48 in\u003c\/li\u003e\n\u003cli\u003e3 ft stainless steel armoured cable\u003c\/li\u003e\n\u003cli\u003eType K ANSI mini-connector\u003c\/li\u003e\n\u003cli\u003eAccepts RTC series screw-on probes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715790831729,"sku":"TC829","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/TC829-12-1.jpg?v=1792286287"},{"product_id":"palmer-wahl-tcl329-thermocouple-extension-handle","title":"Palmer Wahl TCL329 | Thermocouple Extension Handle | Type J or K","description":"\u003cp\u003eThe Palmer Wahl TCL329 is a handle and cord that extends the reach of a thermocouple probe and allows two-handed use. It is available for Type J or Type K thermocouples, and Type T or Type E versions can be supplied on request.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHandle with cord for extra reach\u003c\/li\u003e\n\u003cli\u003eAllows two-handed use\u003c\/li\u003e\n\u003cli\u003eType J or Type K; T or E on request\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715791159409,"sku":"TCL329","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/TCL329K.jpg?v=1792286314"},{"product_id":"palmer-wahl-12436-33-replacement-usb-cable-for-c-and-t-series-calibrators","title":"Palmer Wahl 12436-33 | Replacement USB Cable for C and T Series Calibrators | 3 ft","description":"\u003cp\u003ePalmer Wahl 12436-33 is a 3 ft USB cable supplied as a replacement for C and T series calibrators. It is the cable used when connecting these calibrators to a computer running Palmer Wahl DATACAL software.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 ft length\u003c\/li\u003e\n\u003cli\u003eUSB connection for C and T series calibrators\u003c\/li\u003e\n\u003cli\u003eFor use with DATACAL software\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715791224945,"sku":"12436-33","price":0.0,"currency_code":"AED","in_stock":true}]},{"product_id":"palmer-wahl-acl500-hart-modem","title":"Palmer Wahl ACL500 | HART Modem | For C150 Calibrator","description":"\u003cp\u003eThe Palmer Wahl ACL500 is a HART modem accessory for use with the C150 portable multifunction calibrator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHART modem\u003c\/li\u003e\n\u003cli\u003eFor the C150 portable multifunction calibrator\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715791847537,"sku":"ACL500","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/Website_Image_Coming_Soon_b2c9a16d-1554-4654-ac3c-0bc9070c46ee.jpg?v=1792286391"},{"product_id":"palmer-wahl-12436-41-ac-adapter-for-c-and-t-series-calibrators","title":"Palmer Wahl 12436-41 | AC Adapter for C and T Series Calibrators | 100\/240 V","description":"\u003cp\u003eThe Palmer Wahl 12436-41 is a replacement AC adapter for C and T series portable multifunction calibrators. It accepts 100\/240 V input and comes with snap-on American and European plugs. Listed compatible instruments are the C50, C75, C100, C150 and T150.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e100\/240 V input\u003c\/li\u003e\n\u003cli\u003eSnap-on American and European plugs\u003c\/li\u003e\n\u003cli\u003eFits C50, C75, C100, C150 and T150\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715791945841,"sku":"12436-41","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/Website_Image_Coming_Soon_3890e8fc-4567-43f8-850b-953e92fc287c.jpg?v=1792286415"},{"product_id":"palmer-wahl-12423-05-heavy-duty-hard-carry-case","title":"Palmer Wahl 12423-05 | Heavy Duty Hard Carry Case | 12 x 9 x 4 in, Lockable","description":"\u003cp\u003eThe 12423-05 is a black, heavy duty hinged case from Palmer Wahl that is crushproof and watertight. It holds Heat-Prober meters together with probes up to 8 in long, and also fits DHSA24, DHSA26, DHSA28, DHS29 and DHS35 series instruments and the TC622A. The interior is foam lined, and the case has a manual air purge.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCrushproof, watertight hinged shell\u003c\/li\u003e\n\u003cli\u003eTwo stay-closed latches; accepts a padlock\u003c\/li\u003e\n\u003cli\u003eManual air purge and foam-lined interior\u003c\/li\u003e\n\u003cli\u003eTakes probes up to 8 in long\u003c\/li\u003e\n\u003cli\u003eDimensions 12 x 9 x 4 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715792011377,"sku":"12423-05","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/12423-04_8f887023-296f-4a75-81e8-f7c680a8a98b.jpg?v=1792286431"},{"product_id":"palmer-wahl-acl600-dry-block-and-bath-cable","title":"Palmer Wahl ACL600 | Dry Block and Bath Cable | For C150 Calibrator","description":"\u003cp\u003ePalmer Wahl ACL600 covers the cables for connecting dry blocks and baths, for use with the C150 portable multifunction calibrator.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCables for connecting dry blocks and baths\u003c\/li\u003e\n\u003cli\u003eFor use with the C150 portable multifunction calibrator\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715792044145,"sku":"ACL600","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/Website_Image_Coming_Soon_472d0df1-3433-4110-8cc9-61777c5359ac.jpg?v=1792286432"},{"product_id":"palmer-wahl-12423-01-carrying-case-for-c-t-series-calibrators-and-st2200","title":"Palmer Wahl 12423-01 | Carrying Case for C \u0026 T Series Calibrators and ST2200 | 17 x 13 x 7-3\/8 in","description":"\u003cp\u003ePalmer Wahl 12423-01 is a double walled, foam lined carrying case with an air buffer zone, measuring 17 x 13 x 7-3\/8 in. It is sized for the C50, C75, C100 and C150 multifunction calibrators, the T150, and the ST2200 soldering iron tester. Palmer also packs this case in the KST2200 soldering iron tester kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDouble walled construction with air buffer zone\u003c\/li\u003e\n\u003cli\u003eFoam lined interior\u003c\/li\u003e\n\u003cli\u003eFits C50, C75, C100, C150, T150 and ST2200\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715792797809,"sku":"12423-01","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/12423-01.jpg?v=1792286505"},{"product_id":"palmer-wahl-11913-02-medium-stainless-steel-tag","title":"Palmer Wahl 11913-02 | Medium Stainless Steel Tag | 1 x 3 in, 18 characters","description":"\u003cp\u003eThe Palmer Wahl 11913-02 is a medium-size, Palmer Wahl branded identification tag in 304 stainless steel. It measures 1 in high by 3 in wide and 0.020 in thick, and takes one line of up to 18 customer-specified characters so the marking stays legible. The tag can be added to any applicable product on request.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e304 stainless steel, Palmer Wahl branded\u003c\/li\u003e\n\u003cli\u003eSingle line of up to 18 characters\u003c\/li\u003e\n\u003cli\u003e1 x 3 in, 0.020 in thick\u003c\/li\u003e\n\u003cli\u003eCan be fitted to any applicable product\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715793748081,"sku":"11913-02","price":0.0,"currency_code":"AED","in_stock":true}]},{"product_id":"palmer-wahl-da-4-silicone-paste-for-probes","title":"Palmer Wahl DA-4 | Silicone Paste for Probes | -40 to 204 °C","description":"\u003cp\u003ePalmer Wahl DA-4 is a translucent white silicone paste used as a lubricant and anti-stick agent on temperature probes. It remains stable across a broad range from -40 to 204 °C (-40 to 399 °F) and is supplied in a tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLubricates probes and helps prevent sticking\u003c\/li\u003e\n\u003cli\u003eThermal stability from -40 to 204 °C\u003c\/li\u003e\n\u003cli\u003eTranslucent white silicone paste\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715793879153,"sku":"DA-4","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/DA-4.jpg?v=1792286611"},{"product_id":"palmer-wahl-12232-standard-9v-alkaline-battery","title":"Palmer Wahl 12232 | Standard 9V Alkaline Battery | For Heat-Prober V Meters","description":"\u003cp\u003ePart 12232 is a standard 9 V alkaline battery, offered as a spare or replacement for Palmer Wahl Heat-Prober® \"V\" model meters that are designed to run on 9 V cells. Keeping one with the meter avoids interruptions when a battery runs flat during field work.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStandard 9 V alkaline battery\u003c\/li\u003e\n\u003cli\u003eFor 1770, 3200, 2500, 1370, TCMR, 700 and 392 Series meters\u003c\/li\u003e\n\u003cli\u003eAlso for 392A Series meters (not HP models)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715795878001,"sku":"12232","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/12232.jpg?v=1792286698"},{"product_id":"palmer-wahl-10778-calibration-paper-tag","title":"Palmer Wahl 10778 | Calibration Paper Tag | For RTD and Thermocouple Probes","description":"\u003cp\u003ePalmer Wahl 10778 is a paper tag printed with calibration information. It is the tag included as standard with all Palmer Wahl RTD and thermocouple probes, and it can also be ordered on its own as a spare or replacement. The tag measures 1.90 x 3.72 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCarries calibration information\u003c\/li\u003e\n\u003cli\u003eStandard with Palmer Wahl RTD and thermocouple probes\u003c\/li\u003e\n\u003cli\u003ePaper construction, 1.90 x 3.72 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67715795943537,"sku":"10778","price":0.0,"currency_code":"AED","in_stock":true}]},{"product_id":"palmer-wahl-s-prod-accessories-accessories-for-s-products-transmitters","title":"Palmer Wahl s_prod_accessories | Accessories for S-Products Transmitters | Displays, head, interface kit","description":"\u003cp\u003eThis listing groups accessories for S-Products temperature transmitters distributed by Palmer Wahl. It includes a connection head with a window, standard and large LCD displays, and an interface kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDAL-AL-1\/2-1\/2-W: head with window, 1\/2 in NPT process and cable entries (head only)\u003c\/li\u003e\n\u003cli\u003eMP82-DISPLAY: LCD display, shown with the Mp82810 transmitter\u003c\/li\u003e\n\u003cli\u003eMP87-DISPLAY: large LCD display\u003c\/li\u003e\n\u003cli\u003eSPI-Mp8: interface kit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67735527915633,"sku":"s_prod_accessories","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/MP-Interface-scaled.jpg?v=1792406229"},{"product_id":"palmer-wahl-rm1600-68-custom-paper-tag","title":"Palmer Wahl RM1600-68 | Custom Paper Tag | Customer-specified information","description":"\u003cp\u003eThe Palmer Wahl RM1600-68 is a paper tag printed with information specified by the customer, as opposed to the standard calibration tag. Paper tagging of this kind is available for bimetal, dial and industrial thermometers as well as thermowells. The tag measures 1.90 x 3.72 in.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrinted with customer-specified information\u003c\/li\u003e\n\u003cli\u003eFor bimetal, dial and industrial thermometers and thermowells\u003c\/li\u003e\n\u003cli\u003ePaper, 1.90 x 3.72 in\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67735529554033,"sku":"RM1600-68","price":0.0,"currency_code":"AED","in_stock":true}]},{"product_id":"palmer-wahl-terminal-blocks-terminal-blocks-for-sensor-connection-heads","title":"Palmer Wahl terminal_blocks | Terminal Blocks for Sensor Connection Heads | Ceramic, 2\/4\/6 position","description":"\u003cp\u003ePalmer Wahl ceramic terminal blocks are fitted inside a sensor connection head to make wiring of a thermocouple or RTD assembly straightforward. Three versions are offered, distinguished by the number of positions. Note that the 2-position block cannot be used with spring loaded probes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12405-05: 2 position (not for spring loaded probes)\u003c\/li\u003e\n\u003cli\u003e12405-12: 4 position\u003c\/li\u003e\n\u003cli\u003e12405-02: 6 position\u003c\/li\u003e\n\u003cli\u003eCeramic construction\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67735529717873,"sku":"terminal_blocks","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/12405-02_Terminal_Block.jpg?v=1792406345"},{"product_id":"palmer-wahl-sstag-small-stainless-steel-tag","title":"Palmer Wahl SSTAG | Small Stainless Steel Tag | 5\/8 x 1-15\/16 in, 12 characters per line","description":"\u003cp\u003ePalmer Wahl SSTAG is the small-format 304 stainless steel identification tag, 5\/8 in high and 1-15\/16 in wide. It carries up to 12 customer-specified characters for legibility, and a second line of up to 12 characters can be added on request. The tag can be attached to any applicable product when ordered.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e304 stainless steel\u003c\/li\u003e\n\u003cli\u003eUp to 12 characters per line\u003c\/li\u003e\n\u003cli\u003eOptional second line, two lines maximum\u003c\/li\u003e\n\u003cli\u003eCompact 5\/8 x 1-15\/16 in size\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67735533158513,"sku":"SSTAG","price":0.0,"currency_code":"AED","in_stock":true}]},{"product_id":"palmer-wahl-inor-configuration-inor-transmitter-configuration-kits","title":"Palmer Wahl inor_configuration | INOR Transmitter Configuration Kits | ICON-X and ICON Lite","description":"\u003cp\u003eThese INOR configuration kits are used to program INOR temperature transmitters to suit an application. The ICON-X is a complete kit for all INOR PC-programmable transmitters and works with the ConSoft software, while the ICON Lite covers the 202, MINIPAQ, 330, 530 and 520 transmitter series.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eICON-X: USB interface, cables between transmitter, interface and PC, and carrying case\u003c\/li\u003e\n\u003cli\u003eICON-X configuration through ConSoft software\u003c\/li\u003e\n\u003cli\u003eICON Lite: mini-USB jack, USB interface box, PC cable and transmitter cable\u003c\/li\u003e\n\u003cli\u003eICON Lite for 202, MINIPAQ, 330, 530 and 520 series\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67735533420657,"sku":"inor_configuration","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/icon-x-kit-open.jpg?v=1792406537"},{"product_id":"palmer-wahl-connection-heads-sensor-connection-heads-for-tc-or-rtd-assemblies","title":"Palmer Wahl connection_heads | Sensor Connection Heads for TC or RTD Assemblies | 1\/2 in NPT process","description":"\u003cp\u003ePalmer Wahl's standard connection heads close off a thermocouple or RTD sensor assembly, protecting it from dust and moisture and housing the terminal block or transmitter. All models have a 1\/2 in NPT process connection with a 1\/2 in or 3\/4 in NPT conduit entry. The 12401 range covers general purpose heads in aluminium, polypropylene, cast iron and 316 stainless steel, plus explosion proof heads in 316 SS and cast aluminium.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey features\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAluminium screw top (12401-02, -10) or flip top (12401-03, -19)\u003c\/li\u003e\n\u003cli\u003ePolypropylene screw top (12401-06), FDA approved material\u003c\/li\u003e\n\u003cli\u003eCast iron (12401-08, -11) and 316 SS (12401-09) screw top heads\u003c\/li\u003e\n\u003cli\u003eExplosion proof 316 SS (12401-13, -14) and cast aluminium (12401-16, -17)\u003c\/li\u003e\n\u003cli\u003eExplosion proof heads rated Class I, Division 1, Groups A to D\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Palmer Wahl","offers":[{"title":"Default Title","offer_id":67735534207089,"sku":"connection_heads","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/12401-13.jpg?v=1792406575"}],"url":"https:\/\/www.generaltechshop.ae\/collections\/temperature-measurement-accessories.oembed","provider":"General Tech Services LLC","version":"1.0","type":"link"}