{"product_id":"mitutoyo-227-217-20-absolute-digital-adjustable-measuring-force-micrometer-8-1-2-20-32-30-48-mm","title":"Mitutoyo 227-217-20 ABSOLUTE Digital Adjustable Measuring Force Micrometer, .8′′ – 1.2′′ (20.32 - 30.48 mm)","description":"\u003cp\u003eThe Mitutoyo 227-217-20 is a QuickMike digital micrometer with adjustable, constant\u003cbr\u003emeasuring force, covering .8′′ – 1.2′′ (20.32 - 30.48 mm). It's built for wire, paper, and\u003cbr\u003eplastic\/rubber parts that a standard micrometer would compress or deform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRequest a quote in under a minute — call +971 6 5436933.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePart No. 227-217-20 | Range .8′′ – 1.2′′ (20.32 - 30.48 mm)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStandard micrometers apply whatever force the operator's hand gives them, which is exactly\u003cbr\u003ethe problem when measuring wire, paper, film, or soft plastic and rubber parts — too much\u003cbr\u003epressure and the reading compresses the material; too little and it's inconsistent between\u003cbr\u003eoperators. The Mitutoyo 227-217-20 solves this with a ratchet mechanism in the thimble that\u003cbr\u003eapplies a constant, adjustable measuring force every time, covering .8′′ – 1.2′′ (20.32 - 30.48\u003cbr\u003emm).\u003cbr\u003eThe measuring force can be set in stages (2; 4; 6; 8; 10 N) to match the workpiece, so a\u003cbr\u003edelicate film gets a different force than a length of wire, and the reading stays repeatable\u003cbr\u003eregardless of who is holding the gauge. A non-rotating spindle with a fast 10 mm-per-revolution\u003cbr\u003efeed gets the anvil to the part quickly without twisting or marking it, and the ABSOLUTE digital\u003cbr\u003edisplay means there's no origin-setting step every time the micrometer is switched on.\u003cbr\u003eBecause the applied force is repeatable rather than operator-dependent, even less experienced\u003cbr\u003estaff can produce high-accuracy, consistent readings — useful for shops rotating QC staff\u003cbr\u003eacross shifts or lines.\u003cbr\u003eIf your part falls outside this range, the same QuickMike adjustable-force family also covers\u003cbr\u003e.4′′–.8′′ in the Mitutoyo 227-216-20, so you can match the gauge to your exact part size before\u003cbr\u003eordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReady to order the 227-217-20? Speak to our metrology team. Call +971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConstant, repeatable measuring force — even inexperienced operators get consistent, high-\u003cbr\u003eaccuracy readings\u003c\/li\u003e\n\u003cli\u003eAdjustable force in stages to suit different workpieces, from soft plastic\/rubber to wire and\u003cbr\u003epaper\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNon-rotating spindle avoids twisting or marking delicate parts during measurement\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSpeedy 10 mm\/rev spindle feed gets the anvil to the part far faster than a standard\u003c\/li\u003e\n\u003cli\u003emicrometer thimble\u003cbr\u003eABSOLUTE digital display removes the need to reset the origin every time the micrometer is\u003cbr\u003eswitched on\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eReady to order the 227-217-20? — call +971 6 5436933.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho This Product Is Best For\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQC and inspection teams measuring wire, paper, film, or plastic\/rubber parts that deform\u003cbr\u003eunder normal micrometer pressure\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMachine shops that need consistent readings across multiple operators regardless of\u003cbr\u003eexperience level\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCalibration labs standardising on adjustable-force micrometers for compressible or delicate\u003cbr\u003ematerials\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuyers replacing analog micrometers where operator-applied force was producing\u003cbr\u003einconsistent results\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHow to Measure With This Micrometer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e1. Set the ratchet thimble to the measuring force appropriate for the workpiece material.\u003cbr\u003e2. Zero the display against the setting standard supplied with the unit.\u003cbr\u003e3. Close the spindle onto the part using the ratchet thimble until it clicks, then read the ABSOLUTE digital display directly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrequently Asked Questions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat range does the Mitutoyo 227-217-20 micrometer measure?\u003c\/strong\u003e\u003cbr\u003eThe 227-217-20 measures .8′′ – 1.2′′ (20.32 - 30.48 mm), with Inch\/Metric switching on the\u003cbr\u003edigital display.\u003cbr\u003e\u003cstrong\u003eWhat is a constant\/adjustable measuring force micrometer used for?\u003c\/strong\u003e\u003cbr\u003eIt's designed for parts that deform under normal micrometer pressure, such as wire, paper,\u003cbr\u003efilm, and plastic or rubber components, where a repeatable low force gives a consistent reading\u003cbr\u003eregardless of who is operating the gauge.\u003cbr\u003e\u003cstrong\u003eCan the measuring force be changed?\u003c\/strong\u003e\u003cbr\u003eYes. The force can be adjusted in stages (2; 4; 6; 8; 10 N), with a stated tolerance of ±0.4 +\u003cbr\u003e(force setting\/10) N, to suit different workpiece materials.\u003cbr\u003e\u003cstrong\u003eWhat comes with this micrometer?\u003c\/strong\u003e\u003cbr\u003eThe unit ships with a storage box, a setting standard, a screwdriver, and one battery.\u003cbr\u003e\u003cstrong\u003eHow long does the battery last?\u003c\/strong\u003e\u003cbr\u003eApproximately 5 years under normal use.\u003cbr\u003e\u003cstrong\u003eWhich micrometer should I choose for a different size range?\u003c\/strong\u003e\u003cbr\u003eThe 227-216-20 covers .4′′–.8′′ in the same QuickMike adjustable-force family, so you can match\u003cbr\u003ethe gauge to your exact part size.\u003cbr\u003e\u003cstrong\u003eDoes the spindle rotate against the part?\u003c\/strong\u003e\u003cbr\u003eNo. The spindle is non-rotating, which avoids twisting or marking soft or delicate workpieces\u003cbr\u003eduring measurement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor pricing or to place an order, contact General Tech Services LLC. Call +971 6 5436933\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Mitutoyo","offers":[{"title":"Default Title","offer_id":42170237124721,"sku":"227-217-20","price":0.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0625\/3930\/0977\/files\/mitutoyo-absolute-digimatic-micrometers-quickmike-default-title-mitutoyo-227-217-20-absolute-digital-adjustable-measuring-force-micrometer-inch-metric-range-8-1-2-20-32-30-48-mm-25382039158897.png?v=1761751291","url":"https:\/\/www.generaltechshop.ae\/products\/mitutoyo-227-217-20-absolute-digital-adjustable-measuring-force-micrometer-8-1-2-20-32-30-48-mm","provider":"General Tech Services LLC","version":"1.0","type":"link"}