Humidity Calibrators: Keeping RH Sensors Accurate

Humidity Calibrators: Keeping RH Sensors Accurate

Humidity Calibrators: Keeping RH Sensors Accurate

Humidity calibrators generate a known relative humidity so you can test an RH sensor against a reference and see how far it has drifted. General Tech Services stocks humidity calibrators such as the Vaisala HMK15 and backs them with an EIAC-accredited ISO 17025 calibration lab in Sharjah. This guide shows how they work and how to choose one.

Quality managers and lab technicians in the UAE depend on humidity readings for stored goods, HVAC control and test records. A sensor that has drifted gives confident but wrong numbers. Humidity calibrators are the practical way to catch that drift.

How do humidity calibrators work?

Humidity calibrators place the sensor under test in a controlled atmosphere with a known humidity. You compare the sensor reading with the reference value and record the difference. Two designs are common:

•        Saturated salt solutions give fixed humidity points and need no external power

•        Generators produce adjustable humidity and temperature conditions

Temperature matters because relative humidity changes with it. Good humidity calibrators therefore keep the temperature steady during the check.

Where are humidity calibrators used in UAE facilities?

Humidity matters wherever product, equipment or comfort depends on moisture in the air. Our collection notes use in stores, laboratories, HVAC systems and production areas.

In each setting, the same pattern applies: a trusted reference keeps readings honest, and quality managers can show auditors a documented chain from reference to reading. That is why many sites keep their own calibrator and send critical sensors to a lab.

Why do RH sensors lose accuracy over time?

RH sensors age through dust, chemical exposure and condensation. The drift is slow, so errors often go unnoticed until an audit.

Use this checklist to decide when RH sensor calibration is due:

1.     Follow the interval set in your quality system.

2.     Recalibrate after a repair, a knock or contamination.

3.     Check any sensor with a suspicious reading.

4.     Review the last certificate before you extend an interval.

Which humidity calibrators does General Tech Services stock?

Our humidity calibrators range includes the Vaisala HMK15. It uses saturated salt solutions, needs no external power and suits both lab and field work.

The same collection holds 107 items, from thermo-hygrometers and psychrometers to hygrostats and dew point instruments. The website lists the HMK15 as in stock, and the Vaisala HM40 handheld meter as supplied with a calibration certificate. Confirm availability before you order.

You can also browse Vaisala humidity instruments for related probes and meters. These sit alongside the other humidity calibrators we list.

How is RH sensor calibration done on site and in the lab?

RH sensor calibration follows one logic wherever it happens. The reference must be better than the sensor under test, and every result must be recorded.

Follow these steps:

1.     Let the humidity calibrator and the sensor reach room conditions.

2.     Insert the probe into the chamber or salt pot.

3.     Wait until the reading settles.

4.     Record the reference value and the sensor reading.

5.     Adjust if your procedure allows, then repeat the check.

On-site checks with portable humidity calibrators keep production moving. Lab calibration suits sensors that need a full certificate for an audit. Document every check so that trends in drift become visible over time.

Which humidity transmitters need regular calibration?

Fixed instruments need the same care as portable ones. Browse our humidity transmitters for HVAC, process and laboratory use.

The humidity and dew point instruments we list include:

•        CS Instruments FL 510, an industrial humidity transmitter with a capacitive sensor, two 4 to 20 mA outputs and Modbus RTU

•        Vaisala DMT143, a miniature dew point transmitter covering -70 to +60 degrees C Td with 2 degrees C accuracy

•        Vaisala DMT132, a dew point meter with 1 degree C accuracy on 10 to 28 VDC

•        Vaisala DMP370, an intrinsically safe dew point instrument for Zone 0 and Class I Div 1

Add every one of these humidity transmitters to your calibration schedule.

What do humidity and dew point instruments measure?

Humidity and dew point instruments measure the moisture content of air. The range covers thermo-hygrometers, psychrometers, dew point instruments, hygrostats and humidity calibrators.

They are used in stores, laboratories, HVAC systems and production areas. Check the range, accuracy, sensor type, display or logging and probe style before you buy. Our humidity and dew point instruments sit in the environmental measurement category.

What do humidity calibration services cover?

Choose a lab when you need an audit-ready certificate or cannot remove the instrument easily. Our humidity calibration services run at our lab in Sharjah, UAE.

General Tech Services lists these capabilities:

•        Hygrometer calibration

•        Psychrometer calibration, including dew point and sling types

•        Data logger and recorder calibration

•        Combined temperature and humidity calibration

You receive a calibration certificate with full details for each calibrated item. Our data loggers range covers monitoring hardware for the same sites.

What should you look for in ISO 17025 calibration?

ISO 17025 calibration should show a defined scope and traceable results. Ask three questions before you book:

1.     Does the accreditation scope include humidity?

2.     Are the results traceable to a recognised standard?

3.     Does the certificate show the measured error?

Read about our 17025 accredited calibration services and the EIAC-accredited lab behind them. For background, see the ISO/IEC 17025 standard and ILAC.

Why buy from General Tech Services?

Trust matters when a certificate decides whether a batch ships. General Tech Services has operated since 1998 and works with more than 80 brands.

•        More than 1500 clients across the GCC

•        Authorised service and calibration centre for WIKA, DH Budenberg and HIOKI

•        An EIAC-accredited lab that issues traceable certificates

How do you choose humidity calibrators for your facility?

A short review prevents costly returns. Check these points before you approve humidity calibrators:

•        The model suits your sensor type and range

•        It works in the lab, the field or both

•        The supplier is an established distributor with local support

•        A certificate or calibration plan exists for the calibrator itself

•        Availability is confirmed in writing

Using one list for every order keeps your humidity calibrators purchases consistent and audit ready.

FAQs

What is the difference between a humidity calibrator and a hygrometer?

A hygrometer measures humidity. Humidity calibrators create a known humidity so a hygrometer or transmitter can be checked against it.

Which humidity calibrators work without mains power?

The Vaisala HMK15 uses saturated salt solutions and needs no external power. It works in the lab and in the field.

Can General Tech Services calibrate my RH sensors?

Yes. Our humidity calibration services cover hygrometers, psychrometers, data loggers and recorders at our Sharjah lab.

Is your lab suitable for ISO 17025 calibration audits?

Our lab is EIAC-accredited to ISO 17025. Check that the scope includes humidity and that your auditor accepts EIAC accreditation.

How often should I use humidity calibrators on my sensors?

Set the interval in your quality system and review it against past certificates. Recalibrate after any repair or contamination.

Order humidity calibrators from a local distributor today

Need reliable humidity calibrators and traceable calibration for your RH sensors? Call us on +971 6 5436933 or visit our head office in Sharjah.

Browse humidity calibrators and request a quote