Barton 7106 RF meter, meter Size :6 inch,End Connection Size :1 inch,Flow Rate :250-2500 US GPM

The Barton 7106 is a 6" liquid turbine flow meter from Barton's Model 7100 range, listed for 250-2500 US GPM. It suits low-viscosity liquids including hydrocarbons. Genuine Barton stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call +971 6 5436933.

Part Number: 7106
Contact Number: +971 6 5436933

On large liquid lines, small measurement errors add up to large volumes. The Barton 7106 is a 6" turbine meter listed for 250-2500 US GPM, built for high-volume liquid measurement.

A turbine flow meter places a balanced rotor in the liquid stream. Flow turns the rotor at a speed proportional to flow rate, and a pickup coil on the meter body senses each passing blade tip, producing a pulse signal. Counting the pulses gives volume, and their frequency gives flow rate. The rotor is the only moving part.

The Barton 7106 belongs to Barton's Model 7100 line, which covers 3/8 to 8 inch meters. Model 7100 meters use wear-resistant tungsten carbide sleeve bearings, which need no lubrication and are designed for demanding service.

Barton's 7000 series uses a symmetrical bidirectional design, so it can measure flow in either direction where capacities are the same both ways.

Barton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading. For accurate results, install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream. Confirm materials, pressure rating and electronics against the Barton datasheet and your process before ordering.

Need a different size or model line? Compare the Barton 7104 (4", 105-1250 US GPM), the Barton 7108 (8", 540-5400 US GPM), or the Barton 7306 (6", 250-2250 US GPM).

Key Benefits

• 6" meter listed for 250-2500 US GPM.

• Rotor is the only moving part, keeping maintenance requirements straightforward.

• Tungsten carbide sleeve bearings provide wear resistance for demanding service.

• Bidirectional design supports flow measurement in either direction where capacities are the same.

• Pickup coil pulse output can interface with flow computers and readouts.

• Published series linearity of ±0.25% of reading.

• Published series repeatability of ±0.02% of reading.

• Genuine Barton stock with free UAE-wide shipping.

Contact Details

General Tech Services LLC supplies genuine Barton stock in the UAE. Call +971 6 5436933 for pricing, stock availability and lead time.

Who This Product Is Best For

• High-volume hydrocarbon liquid transfer and pipeline applications.

• Terminal and storage measurement points.

• Liquid flow measurement applications within the 250-2500 US GPM listed range.

• Applications where custody-transfer-grade metering is being considered.

• Process and instrumentation teams working with low-viscosity liquids.

How to Specify & Install It

1. Check that your normal and maximum flow fall within 250-2500 US GPM and that the liquid is suitable for a turbine meter.

2. Install the meter in straight pipe of the same diameter, with at least 10 pipe diameters of straight run upstream, as the Barton manual specifies.

3. Connect the pickup coil to your flow computer or readout.

4. Enter the meter's K-factor from its calibration certificate.

5. Confirm materials, pressure rating, electronics and process compatibility against the Barton datasheet before commissioning.

Frequently Asked Questions

• How does a turbine flow meter work?
  Liquid turns a balanced rotor, while a pickup coil senses each passing blade and produces pulses in proportion to flow. Pulse frequency indicates flow rate, while pulse counting can be used to determine volume.

• Which liquids suit the Barton 7106?
  Barton's 7000 series is designed for low-viscosity liquids, including hydrocarbon liquids. Confirm viscosity and material compatibility with our team before ordering.

• How accurate is the Barton 7106?
  Barton's published series data gives linearity of ±0.25% of reading over the flow range and repeatability of ±0.02% of reading.

• Does the meter need straight pipe?
  Yes. Barton specifies straight pipe of the same diameter with at least 10 diameters of straight run upstream for accurate operation.

• Should I choose the 7106 or another size?
  Size the meter to your actual flow requirements, not simply the pipe size. The 7106 is listed for 250-2500 US GPM. For lower flows, see the Barton 7104. For higher flows, see the Barton 7108. Contact our team to confirm the best fit.

• Can it measure reverse flow?
  The 7000 series has a symmetrical bidirectional design, allowing flow measurement in either direction where capacities are the same. Electronic options can also sense flow direction.

• What output does the Barton 7106 provide?
  The series uses a pickup coil pulse output, typically listed as 20 mV to 5 V peak-to-peak. Confirm the specific electronics and output configuration before ordering.

• Is genuine Barton stock available with UAE shipping?
  Yes. Genuine Barton stock ships free across the UAE. Call +971 6 5436933 for current pricing and lead time.

+971 6 5436933