




Low Voltage AC Yoke | WC-42
The WC-42 Low Voltage AC Yoke complies with various safety regulations around the world. Because of the use of lower voltages (nominally 115 Volts), with excellent grounding systems on convenience ("Mains") outlets, these models are not used in North America. GFCIs (Ground Fault Current Interrupters) are installed on outdoor and most industrial outlets to protect workers and the general public even further. The WC-42 is based on the WC-6 and is powered by a standard 42 Volt Power Supply (7.5 Amps Minimum) or a Western Instruments PD-42 power supply with a 230/50 input voltage. The WC-42's Switching System is designed to handle higher amperages with greater dependability.

Free UAE shipping available
- Specifications
- Features
- Downloads
Capacity | <10 pounds (4.5 kg) |
Current range | 6.5 Amps 'In Air', 5.5 Amps on work piece |
Finish | Urethane Rubber |
Frequency (Hz) | 50 Hz |
Voltage | 42 VAC |
Weight | 6.5 pounds (3.0 kg) |
Meets EU Low Voltage Yoke Requirements.
Small and lightweight (6.5 pounds).
Ergonomic Grip that is comfortable to hold.
Solid State Switch that is grounded.
Switch Cover with a Sealed Seal.
Tough Strain Relief.
Encapsulant made of urethane rubber.
UL/CSA approval is optional.
The duty cycle is set to 100%.
Related Products

Kennedy KEN5031120K | BATTERY TESTER

Kennedy KEN5031120K | BATTERY TESTER

REED R5000 | Watt Meter | Range 0 to 6000W | Resolution 1W

REED R5000 | Watt Meter | Range 0 to 6000W | Resolution 1W

Dwyer Instruments PM-2 | Digital Pen Meter with Phase Rotation

Dwyer Instruments PM-2 | Digital Pen Meter with Phase Rotation

Dwyer Instruments MM-2 | Digital Multimeter with True RMS;MM-2;Measures DC/AC Voltage;DC/AC

Dwyer Instruments MM-2 | Digital Multimeter with True RMS;MM-2;Measures DC/AC Voltage;DC/AC

Dwyer Instruments ASG | Analog signal generator

Dwyer Instruments ASG | Analog signal generator

OMRON S8VK-S03024 | Book type power supply, 30 W, 24 VDC, 1.3A, DIN rail mounting, Push-in terminal, Coated

OMRON S8VK-S03024 | Book type power supply, 30 W, 24 VDC, 1.3A, DIN rail mounting, Push-in terminal, Coated

OMRON CP1W-BAT01 | Battery for the CP1 PLC

OMRON CP1W-BAT01 | Battery for the CP1 PLC

OMRON CJ1W-BAT01 | Battery for CJ1M PLCs

OMRON CJ1W-BAT01 | Battery for CJ1M PLCs