Norbar EvoTorque ET2-72 Electronic Torque Multiplier 135-1350NM, 3/4" Square Drive
The Norbar EvoTorque 2 ET2-72 is a mains-powered electronic torque tool designed to deliver 135–1,350 N·m through a 3/4" square drive with ±3% accuracy. It features intelligent joint sensing, multiple tightening modes, on-board data storage and USB/Bluetooth connectivity for torque record management. Available in 110 V and 230 V configurations, it is suitable for demanding industrial bolting applications. Supplied by General Tech Services LLC, UAE. Request a quote by calling +971 6 5436933.
Part No. ET2-72
The Norbar EvoTorque 2 ET2-72 provides controlled, repeatable tightening for industrial maintenance, plant shutdowns and structural bolting. Its 135–1,350 N·m torque range and 3/4" square drive make it suitable for applications such as pipe flanges, heat exchanger covers and mid-sized structural connections within its rated capacity.
The pistol-style design supports single-operator use, while the reaction arm provides a reaction point during tightening. Intelligent joint-sensing technology helps maintain consistent results across different joint conditions.
The tool offers Torque, Torque & Angle and Torque Audit modes. Tightening results are displayed and stored with date and time information, with memory for up to 3,000 readings. USB and Bluetooth 4.0 connectivity allow records to be transferred to a PC, while Norbar's EvoLog software supports tool setup and data management. The optional Turn Angle function helps check whether a fastener has already been tightened.
This model is available in 110 V and 230 V versions. Confirm your site's supply voltage, required torque range and calibrated operating limits before ordering.
Key Benefits
-
135–1,350 N·m torque range for demanding industrial bolting applications.
-
±3% accuracy within the specified calibrated range and operating conditions.
-
Intelligent joint sensing for consistent tightening on hard and soft joints.
-
Three operating modes: Torque, Torque & Angle and Torque Audit.
-
On-board storage for up to 3,000 date- and time-stamped readings.
-
USB and Bluetooth 4.0 connectivity for data transfer through EvoLog PC software.
-
Traceable torque and angle calibration certificate supplied as standard, as specified for this model.
-
Choice of 110 V or 230 V power supply to suit compatible site requirements.
-
Single-operator operation with a reaction arm for controlled bolting.
For pricing and availability, contact General Tech Services LLC at +971 6 5436933.
Who This Product Is Best For
-
Maintenance and shutdown teams tightening pipe flanges and industrial connections.
-
EPC contractors and quality assurance teams requiring traceable torque records.
-
Industrial sites that need a choice of 110 V or 230 V configurations.
-
Plant maintenance professionals performing repetitive high-torque bolting.
-
Workshops and engineering teams that need digital tightening records for quality control.
How to Use It
-
Fit the appropriate reaction arm and a compatible impact-rated socket for the fastener.
-
Connect the tool to the correct power supply, switch it on and select the required tightening mode.
-
Enter the target torque and, if applicable, the required angle settings.
-
Position the reaction arm against a suitable, solid reaction point and operate the tool according to the manufacturer's instructions.
-
Confirm that the tightening cycle has completed as intended and review the displayed result.
-
Check the stored reading and transfer the data to a PC through USB or Bluetooth using EvoLog software when required.
Frequently Asked Questions
What torque range does the Norbar ET2-72 cover?
The listed range is 135–1,350 N·m, with a 3/4" square drive. The specified calibrated range is 20%–100% of maximum capacity in the clockwise direction. Check the required target torque against the tool's calibration documentation.
How accurate is the EvoTorque 2 ET2-72?
The listed accuracy is ±3% of the set value within the specified calibrated range and operating conditions. The stated performance applies to joints with a rotation of 30° or more.
Can the tool store and export tightening results?
Yes. It can store up to 3,000 readings with date and time information. Results can be transferred to a PC through USB or Bluetooth 4.0 and managed using Norbar EvoLog software.
Is the ET2-72 available in both 110 V and 230 V versions?
Yes. The listing specifies both voltage options. Confirm the required version when requesting a quotation and ensure it matches the site's electrical supply.
Which tightening modes are available?
The tool offers Torque, Torque & Angle and Torque Audit modes. The optional Turn Angle function helps identify fasteners that may have already been tightened.
How can I get a price and delivery estimate in the UAE?
Contact General Tech Services LLC to confirm the correct voltage version, current availability and lead time.
For the Norbar EvoTorque 2 ET2-72, Part No. ET2-72, contact General Tech Services LLC, UAE, for pricing and availability. Call +971 6 5436933.
