Norbar HT3 Kit 3/4 1300 Nm Manual Torque Multipliers 130-1300NM
The Norbar HandTorque HT3 1300 (Highwayman), Part No. 17218, is a manual torque multiplier designed to deliver up to 1,300 N·m of output torque using a 1/2" square drive input and a 3/4" square drive output. With a 5:1 torque multiplication ratio and multiplication accuracy better than ±4%, it provides high torque without electricity, batteries or compressed air. Genuine Norbar torque tools are available from General Tech Services LLC, UAE. Request a quote in under a minute by calling +971 6 5436933.
Part No.: 17218
Contact Number: +971 6 5436933
Removing and tightening high-torque fasteners can be challenging in fleet workshops, industrial maintenance facilities and heavy equipment service environments. The Norbar HandTorque HT3 1300 (Highwayman) helps users apply higher torque with a suitable standard torque wrench, reducing the need for large powered tools in applications where portability and access are important.
The multiplier uses multi-stage epicyclic gearing to convert a lower input torque into a higher output torque. Its stated 5:1 torque multiplication ratio allows the operator to calculate the required input torque by dividing the target output torque by five. For example, a target output of 1,000 N·m requires a nominal input of 200 N·m, subject to the manufacturer's instructions and applicable operating limits.
The listed working range is 130–1,300 N·m. The 1/2" square drive input accepts a compatible torque wrench, while the 3/4" square drive output connects to a suitable socket. With no external power source required, the HT3 1300 is useful in remote locations, service vehicles and industrial sites where powered equipment may be inconvenient or restricted.
The multiplier is designed for robust manual operation and uses a gearbox arrangement with relatively few wear parts. This listing may correspond to the same HT3 1300 multiplier supplied in a complete kit; confirm the included accessories and configuration with General Tech Services LLC before ordering. You can also compare it with the Norbar HT3 1300 complete kit, Part No. 17220.
Key Benefits
-
High torque output: delivers up to 1,300 N·m.
-
5:1 torque multiplication ratio: increases output from a suitable torque wrench.
-
Specified multiplication accuracy: better than ±4%.
-
Standard drive connections: 1/2" square input and 3/4" square output.
-
No external power required: operates manually without batteries, electricity or compressed air.
-
Portable and practical: suitable for workshops, service vehicles and remote maintenance locations.
-
Rugged gearbox design: supports demanding manual bolting applications.
-
Flexible application: useful where powered torque tools are impractical or restricted.
For pricing, availability and confirmation of the supplied configuration, contact General Tech Services LLC, UAE, at +971 6 5436933.
Who This Product Is Best For
-
Fleet and commercial vehicle workshops handling high-torque fasteners.
-
Heavy equipment maintenance teams requiring portable torque multiplication.
-
Offshore, oil and gas and petrochemical facilities where powered tools may be restricted.
-
Industrial maintenance personnel working in remote or confined locations.
-
Workshops that already have a compatible torque wrench and need greater output torque.
How to Specify & Install It
-
Confirm the required output torque: Ensure the application falls within the listed 130–1,300 N·m working range.
-
Check drive compatibility: Verify that your torque wrench has a compatible 1/2" square drive and that the output socket suits the 3/4" square drive.
-
Calculate the input torque: Divide the target output torque by the stated 5:1 torque multiplication ratio, following the manufacturer's instructions.
-
Set up the multiplier: Fit the torque wrench to the input drive and the appropriate socket to the output drive.
-
Position the reaction arm correctly: Ensure it bears against a suitable, solid reaction point as specified by Norbar. Keep hands and body parts clear of reaction and pinch points.
-
Apply torque carefully: Operate the wrench smoothly and follow the manufacturer's procedure. Do not exceed the tool's rated limits.
-
Verify the setup: Confirm the correct direction of operation, socket engagement and reaction arrangement before loading the tool.
-
Check the supplied accessories: Confirm whether the listing includes a reaction arm, sockets or other kit components before purchase.
Frequently Asked Questions
1. What is the maximum output torque of the Norbar HT3 1300 Highwayman?
It delivers up to 1,300 N·m, with a listed working range of 130–1,300 N·m.
2. What is the torque multiplication ratio?
The stated ratio is 5:1. To estimate the required input, divide the target output torque by five, subject to the manufacturer's instructions.
3. How accurate is the HT3 1300?
Its stated torque multiplication accuracy is better than ±4%. This describes the multiplier's performance and should not be confused with the accuracy of the torque wrench used to drive it.
4. What are the input and output drive sizes?
The multiplier has a 1/2" square drive input and a 3/4" square drive output.
5. Does the Norbar HandTorque HT3 1300 need an external power source?
No. It is manually operated and does not require electricity, batteries or compressed air.
6. What is the difference between Part No. 17218 and the complete kit, Part No. 17220?
The supplied information indicates that Part No. 17218 may cover the same HT3 1300 multiplier as the complete kit. Confirm the exact contents and included accessories with General Tech Services LLC before ordering.
7. How can I get a price in the UAE?
Contact General Tech Services LLC for current pricing, availability and lead-time information.
+971 6 5436933
