


ANALOG EARTH TESTER FT3151, Classic Ground Resistance Tester Using 3-Pole Method
Electrical equipment must be earthed or grounded in order to ensure safety, protect lives, and prevent equipment damage. The FT3151 Analog EarthTester measures earthing resistance using an AC phase differential method, ensuring that accurate measurements are unaffected by earth voltage and auxiliary earthing resistance. Clean-up is a breeze with new cord winders.

Free UAE shipping available
- Specifications
- Features
- Downloads
Brand | Hioki |
Measurement range | 10 © (0 to 11.5 ©), 100 © (0 to 115 ©), 1000 © (0 to 1150 ©) |
Part number | FT3151 |
Power Supply | LR6 (AA) Alkaline battery ƒ-6, 1100 times operation (at 30 sec. measurement/ 30 sec. rest cycle) |
Three-electrode method, Two-electrode method (Simple Measurement)
Wide measurement range for 0 to 1150 Ω, based on EN standard
Switchable measurement frequency to reduce the effects of power supply harmonics
Dramatically faster setup: Comes with improved grounding rods and cord winders
Related Products

REED R5050 1000A True RMS AC/DC Clamp Meter

REED R5050 1000A True RMS AC/DC Clamp Meter

REED R5040 1000A True RMS AC/DC Clamp Meter with NCV

REED R5040 1000A True RMS AC/DC Clamp Meter with NCV

REED R5015 60A True RMS AC/DC Clamp Meter with NCV

REED R5015 60A True RMS AC/DC Clamp Meter with NCV

REED R5020 400A AC Clamp Meter with NCV

REED R5020 400A AC Clamp Meter with NCV

REED R5700 Clamp-On Ground Resistance Tester

REED R5700 Clamp-On Ground Resistance Tester

REED R5060 2000A True RMS AC/DC Clamp Meter

REED R5060 2000A True RMS AC/DC Clamp Meter

REED R5030 500A True RMS AC/DC Clamp Meter with NCV

REED R5030 500A True RMS AC/DC Clamp Meter with NCV

REED R5100 Non-Contact AC Voltage Detector with Flashlight

REED R5100 Non-Contact AC Voltage Detector with Flashlight