ASCO 88130736 | Manual Pilot Valve | Lever Type Switch | Series 881 | Weight 0.11 kg
The ASCO 88130736 is a genuine manual pilot valve from ASCO's Series 881 range (lever-type switch), suited to pneumatic control panels and operator stations. It is also a practical choice for machine builders adding manual overrides. Genuine stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call +971 6 5436933.
Part Number: 88130736
Contact Number: +971 6 5436933
Not every pneumatic signal should come from a PLC. Sometimes an operator needs to switch it by hand. The ASCO 88130736 is a Series 881 lever-type manual pilot valve that weighs just 0.11 kg.
Manual pilot valves let an operator switch a pneumatic signal directly, without electrical controls. They are used to start and stop machines, select modes, test actuators and provide hands-on override in pneumatic logic circuits.
In pneumatic systems, small components decide whether a machine runs smoothly or keeps stopping. A worn or mismatched valve leaks air, slows cylinders and makes fault-finding harder for maintenance teams. Fitting a genuine ASCO part with the right function and connections keeps the circuit predictable, cuts compressed-air waste, which is one of the most expensive utilities in a plant, and makes future replacement a simple like-for-like swap.
Compact and robust, the ASCO 88130736 is a simple way to add dependable manual control to a pneumatic panel or machine.
Need a different function within the family? Compare the ASCO 31000010 (G1/8 ports, lever type (M4, as listed)) or the ASCO 32000001 (3/2, normally closed (NC)), and keep the same installation approach.
Key Benefits
-
Direct manual control of a pneumatic signal
-
No electrical supply needed
-
Compact and robust for panel or machine mounting
-
Ideal for overrides, testing and mode selection
-
Genuine ASCO stock with free UAE-wide shipping
General Tech Services LLC — Genuine ASCO Stock, UAE · +971 6 5436933
Call +971 6 5436933 for pricing and stock availability.
Who This Product Is Best For
-
Pneumatic control panels and operator stations
-
Machine builders adding manual overrides
-
Maintenance teams replacing an existing ASCO pilot valve
How to Specify & Install It
-
Confirm the ASCO 88130736 function and port size against your pneumatic circuit.
-
Mount the valve on the panel or machine where the operator can reach it safely.
-
Connect the supply and signal lines, keeping debris out of the ports.
-
Operate it several times to confirm a clean signal and no leakage.
Frequently Asked Questions
What is a pilot valve used for?
It switches a small pneumatic signal that controls a larger valve, actuator or pneumatic logic circuit.
Does the 88130736 need electrical power?
No. It is operated manually, so it works without any electrical supply.
What is the function of the 88130736?
The ASCO 88130736 is a lever-type manual pilot valve designed for direct manual switching of a pneumatic signal.
Should I choose the 88130736 or another ASCO model?
Start with the required function, port size and application. The 88130736 is a lever-type switch. If you need G1/8 ports with a lever-type (M4, as listed) function, the ASCO 31000010 may suit better. If you need a 3/2 normally closed (NC) function, the ASCO 32000001 may suit better. Contact our team to confirm.
How should I maintain the 88130736?
Supply clean, dry, filtered air, check for audible leaks during routine rounds, and replace the valve or its seals when switching becomes sluggish.
What is the most common mistake when ordering a pneumatic valve?
Choosing the wrong function or port size. Check the circuit diagram and the full part number before ordering.
Is genuine ASCO stock available with UAE shipping?
Yes. Genuine ASCO stock ships free across the UAE. Call +971 6 5436933 for current pricing and lead time.
+971 6 5436933
