ASCO PROFILED/TIE RODS CYLINDERS, ˜ 32 to 100 mm - double acting ISO 15552-AFNOR-DIN double force tandem with linked piston rods Series 450-453, Type PES
Part No. Series 450/453 PES Tandem
The ASCO Series 450/453 Type PES Tandem is a double-acting ISO 15552 (AFNOR/DIN) profiled tie-rod cylinder with 32 to 100 mm bore sizes. It uses two pistons on linked piston rods to provide increased thrust while maintaining the same bore diameter. Genuine ASCO product supplied in the UAE by General Tech Services LLC, with free UAE-wide shipping. Request a quote in under a minute - call +971 6 543 6933.
The tandem configuration is designed for applications where additional force is required but there is limited space for a larger-bore cylinder. Two pistons working in series on the linked rod arrangement add their effective areas, providing thrust close to double that of a single cylinder with the same bore.
Typical applications include pressing, punching and clamping operations requiring higher force, as well as machines where the available diameter envelope limits the use of a larger cylinder.
Before ordering, have the existing part number, bore, stroke, mounting details and operating environment available. These details help confirm the correct ASCO variant for the application.
Ready to order the ASCO Series 450/453 PES Tandem? Speak to our team. Call +971 6 543 6933
Key Benefits
-
Increased thrust from two pistons working together
-
Suitable where a larger bore cannot fit
-
32–100 mm bore range
-
ISO 15552 (AFNOR/DIN) dimensions
-
Double-acting operation
-
Tandem design with linked piston rods
-
Genuine ASCO product and specification
-
Free UAE-wide shipping on genuine ASCO stock
Who This Product Is Best For
-
Pressing, punching and clamping applications requiring increased force
-
Machines with limited available diameter space
-
Equipment requiring higher cylinder thrust without changing to a larger bore
-
Automation applications using ISO 15552-based cylinder mounting arrangements
How to Install & Use It
-
Confirm the required bore, stroke and mounting arrangement against the machine drawing.
-
Install the cylinder using compatible ISO 15552 mountings and keep the piston rod correctly aligned with the load.
-
Connect the compressed-air lines to the appropriate ports through suitable flow-control components.
-
Use clean, dry and filtered compressed air for reliable operation.
-
Cycle the cylinder slowly during commissioning and verify movement and operating speed before running at full rate.
Frequently Asked Questions
How does the ASCO tandem cylinder increase force?
Two pistons operate on linked piston rods, allowing their effective areas to work together and provide thrust close to double that of a single cylinder with the same bore.
What bore sizes are available?
The listing covers bore sizes from 32 to 100 mm.
Is the cylinder compatible with ISO 15552?
Yes. The Series 450/453 PES Tandem follows ISO 15552 (AFNOR/DIN) dimensions.
Where is a tandem cylinder useful?
It is useful for pressing, punching, clamping and other automation applications where higher force is required but there is limited space for a larger-bore cylinder.
What air quality does it need?
Use clean, dry and filtered compressed air. Suitable air preparation helps protect pneumatic components and support consistent operation.
How do I choose this model or another Series 450/453 cylinder?
Choose the cylinder based on required force, bore, stroke, mounting arrangement and application conditions. Send your machine details and ASCO part number to General Tech Services LLC for compatibility confirmation.
Can you supply matching ASCO parts in the same order?
Yes. General Tech Services LLC can supply compatible ASCO cylinders, guiding units, air preparation units, manual valves, sensors and quick exhaust valves. Provide the required part numbers and application details for a combined quotation.
Is this a genuine ASCO product?
General Tech Services supplies original ASCO pneumatic cylinders and other ASCO products in the UAE with technical support.
How do I get pricing and lead time?
Pricing is quote-based. Call General Tech Services LLC on +971 6 543 6933 or submit the Request a Quote form.
For pricing or to place an order, contact General Tech Services LLC. Call +971 6 543 6933.
