ASCO PROFILED/TIE RODS CYLINDERS ˜ 32 to 200 mm - double acting ,ISO 15552-AFNOR-DIN mounted nose to nose,Series 450-453,Type PES
Part No. Series 450/453 PES Nose-to-Nose
The ASCO Series 450/453 Type PES Nose-to-Nose assembly consists of two double-acting ISO 15552 (AFNOR/DIN) profiled tie-rod cylinders, available in 32 to 200 mm bore sizes and mounted nose-to-nose. The arrangement provides two opposing piston-rod movements from a single compact assembly, making it suitable for specialized automation, clamping and positioning applications. Genuine ASCO product supplied in the UAE by General Tech Services LLC, with free UAE-wide shipping. Request a quote in under a minute - call +971 6 543 6933.
Joining the cylinders at their front ends creates an assembly with rods operating in opposite directions. This arrangement can simplify machine layouts where two opposing strokes are required from a central mounting point and can reduce the need for separate cylinder mounting arrangements.
Typical applications include machines requiring opposing push actions, special-purpose clamping and positioning systems, and equipment where reducing the number of separate mounting brackets is useful.
Before ordering, have the existing part number, bore, stroke, mounting details and operating environment available. These details help confirm the correct ASCO configuration for the application.
Ready to order the ASCO Series 450/453 PES Nose-to-Nose? Speak to our team. Call +971 6 543 6933
Key Benefits
-
Two opposing piston-rod movements from one assembly
-
Nose-to-nose cylinder arrangement
-
Compact solution for opposing-stroke applications
-
Wide 32–200 mm bore range
-
ISO 15552 (AFNOR/DIN) dimensions
-
Double-acting operation
-
Genuine ASCO product and specification
-
Free UAE-wide shipping on genuine ASCO stock
Who This Product Is Best For
-
Machines requiring opposing push actions
-
Special-purpose clamping applications
-
Positioning systems requiring two opposing strokes
-
Machine designs where separate cylinder brackets can be reduced
How to Install & Use It
-
Confirm the required bore, stroke and mounting arrangement against the machine drawing.
-
Install the assembly using compatible ISO 15552 mountings and maintain correct rod alignment with the load.
-
Connect the compressed-air lines to the appropriate ports through suitable flow-control components.
-
Use clean, dry and filtered compressed air for reliable pneumatic operation.
-
Cycle the assembly slowly during commissioning and verify both opposing movements before operating at full production speed.
Frequently Asked Questions
What does mounted nose-to-nose mean?
Two cylinders are joined at their front ends, allowing their piston rods to operate in opposite directions.
What bore sizes are available?
The listing covers bore sizes from 32 to 200 mm.
Is the assembly compatible with ISO 15552?
Yes. The cylinders conform to ISO 15552 (AFNOR/DIN) dimensions.
Where is a nose-to-nose cylinder arrangement useful?
It is suitable for machines requiring opposing push actions, special-purpose clamping and positioning applications, and layouts where two opposing strokes are required from a central mounting arrangement.
What air quality does it need?
Use clean, dry and filtered compressed air. Suitable air preparation helps protect pneumatic components and support consistent operation.
How do I choose this model or another Series 450/453 cylinder arrangement?
Choose the arrangement based on the required movement, bore, stroke, mounting arrangement and application conditions. Send your machine details and ASCO part number to General Tech Services LLC for compatibility confirmation.
Can you supply matching ASCO parts in the same order?
Yes. General Tech Services LLC can supply compatible ASCO cylinders, guiding units, air preparation units, manual valves, sensors and quick exhaust valves. Provide the required part numbers and application details for a combined quotation.
Is this a genuine ASCO product?
General Tech Services supplies original ASCO pneumatic cylinders and other ASCO products in the UAE with technical support.
How do I get pricing and lead time?
Pricing is quote-based. Call General Tech Services LLC on +971 6 543 6933 or submit the Request a Quote form.
For pricing or to place an order, contact General Tech Services LLC. Call +971 6 543 6933.
