Dwyer Instruments 2716-WP | Current to pressure transducer | 4-20 mA input | 6-30 psig (0.4-2.1 bar) output
The Dwyer Instruments 2716-WP is a Series 2700 current-to-pressure (I/P) transducer that converts a 4-20 mA input signal into a 6-30 psig (0.4-2.1 bar) pneumatic output. It combines low air consumption and dependable performance with a NEMA 4X (IP66) enclosure and CE, CSA and FM approvals for intrinsically safe applications.
Genuine Control Techniques stock · Free UAE-wide shipping
Part Number: 2716-WP
Request a quote in under a minute — call +971 6 5436933.
Product Overview
The Dwyer 2716-WP I/P transducer provides an economical way to convert a variable 4-20 mA current signal into a proportional pneumatic output. Its Series 2700 design combines dependable signal conversion with minimal air consumption, making it suitable for a wide range of process and HVAC control applications.
The unit provides 6-30 psig (0.4-2.1 bar) pneumatic output and has an output capacity of up to 4.5 scfm at 25 psig supply and 12.0 scfm at 100 psig supply. An integrated volume booster provides high flow capacity where faster control response is required.
For installation flexibility, the 2716-WP provides input and output ports on both the front and rear, allowing different plumbing arrangements. The NEMA 4X enclosure supports indoor and outdoor installation, while FM and CSA approvals support use in intrinsically safe applications.
The transducer is intended for panel or remote mounting and is not designed to be vibration resistant. External zero and span adjustments make field calibration convenient.
The 2716-WP uses a 1/2" female NPT electrical connection and a 1/4" female NPT pressure connection. It is loop powered and operates across a temperature range of -20 to 150°F (-29 to 66°C).
Key Benefits
- Converts 4-20 mA electrical signals to 6-30 psig (0.4-2.1 bar) pneumatic output
- Economical Series 2700 design with minimal air consumption
- Integrated volume booster provides high flow capacity
- Front and rear input/output ports for flexible plumbing
- NEMA 4X (IP66) enclosure for indoor and outdoor mounting
- CE, CSA and FM approvals for intrinsically safe applications
- External zero and span adjustments for field calibration
- Loop-powered operation
- Suitable for panel and remote mounting
- Free UAE-wide shipping on genuine Dwyer stock
Who This Product Is Best For
The Dwyer 2716-WP is suited for process and HVAC applications requiring 4-20 mA to pneumatic signal conversion.
It is particularly useful for installations where an economical Series 2700 I/P transducer is required for panel or remote mounting, along with NEMA 4X protection and FM/CSA approvals for intrinsically safe applications.
For applications exposed to significant vibration, the Series 2800 models may be considered where vibration-insensitive operation is required.
How to Specify & Commission It
- Confirm that the 6-30 psig (0.4-2.1 bar) output range matches the requirements of the final control element.
- Connect the 4-20 mA loop-powered input using the 1/2" female NPT electrical connection.
- Connect the air supply and pneumatic output through the 1/4" female NPT pressure connection.
- Ensure the air supply is at least 5 psig above the maximum output pressure and does not exceed 100 psig.
- Use the external zero and span adjustments to complete field calibration.
Frequently Asked Questions
What does the Dwyer 2716-WP do?
The 2716-WP converts a 4-20 mA current signal into a proportional 6-30 psig (0.4-2.1 bar) pneumatic output pressure.
What is the output range of the 2716-WP?
The transducer provides a 6-30 psig (0.4-2.1 bar) pneumatic output.
What safety approvals does the 2716-WP have?
The unit carries CE, CSA and FM approvals and features a NEMA 4X (IP66) enclosure for applications requiring intrinsic-safety protection.
What connections does the 2716-WP use?
It uses a 1/2" female NPT electrical connection and a 1/4" female NPT pressure connection.
Is the Dwyer 2716-WP loop powered?
Yes. The 2716-WP uses a 4-20 mA loop-powered input.
Can the 2716-WP be calibrated in the field?
Yes. The unit provides external zero and span adjustments for field calibration.
What is the output capacity of the 2716-WP?
The output capacity is 4.5 scfm at 25 psig supply and 12.0 scfm at 100 psig supply.
What is the operating temperature range?
The specified operating temperature range is -20 to 150°F (-29 to 66°C).
Is the 2716-WP vibration resistant?
No. The Series 2700 design is intended for panel or remote mounting and is not vibration resistant. For applications requiring vibration-insensitive operation, the Series 2800 construction may be considered.
What is the difference between the 2716-WP and 2816-WP?
Both provide a 6-30 psig (0.4-2.1 bar) output and share NEMA 4X and FM/CSA approvals. The 2716-WP belongs to the Series 2700, while the 2816-WP belongs to the Series 2800, which is designed to be less sensitive to vibration and mounting conditions.
Is genuine stock available with UAE shipping?
Yes. Genuine Dwyer stock with free UAE-wide shipping is available through General Tech Services LLC. Call +971 6 5436933 for pricing and current availability.
Request a Quote Today
For pricing, availability or technical assistance with the Dwyer 2716-WP I/P transducer, contact General Tech Services LLC.
Call: +971 6 5436933
Website: www.generaltechshop.ae
