Dwyer Instruments BV2M102 | 1/2" two-piece stainless steel ball valve
The Dwyer BV2M102 is a 1/2" two-piece stainless steel ball valve designed for chemical, petrochemical, pulp & paper, and general industrial applications. Its full-port design, CF8M stainless steel construction, 316 stainless steel stem, and RTFE/PTFE sealing provide reliable, bubble-tight shutoff up to 1000 psi WOG. Genuine Dwyer stock at General Tech Services LLC, UAE. Free UAE-wide shipping.
Request a quote in under a minute - call +971 6 5436933.
Part No. BV2M102
The Dwyer BV2M102 is a 1/2" two-piece stainless steel ball valve designed for process, utility, and general industrial piping applications. Its investment-cast CF8M stainless steel body, ball and end caps provide durable construction, while the 316 stainless steel stem supports reliable service in demanding environments.
The valve uses RTFE, a 15% glass-reinforced PTFE material, for the seats and thrust washer, with PTFE used for the end gasket and stem packing. This sealing arrangement provides bubble-tight shutoff up to 1000 psi (69 bar) WOG, with a 150 psi (10.3 bar) steam working pressure rating.
The full-port design helps minimise pressure loss while providing maximum flow capacity. An internally loaded, blowout-proof stem provides added protection against stem ejection under overpressure conditions.
Integral actuator mounting pads are included, allowing the same valve body to be adapted for automated operation later without requiring a replacement valve.
With its 1/2" size, the BV2M102 is suitable for a wide range of process and utility piping installations. The BV2M series is available from 1/4" through 3" with the same general construction and pressure rating.
Key Benefits
- 1/2" two-piece stainless steel ball valve with female NPT connection
- CF8M stainless steel body, ball and end caps for durable industrial service
- 316 stainless steel stem for reliable process-media contact
- RTFE/PTFE seats and seals for bubble-tight shutoff
- 1000 psi (69 bar) WOG pressure rating
- Full-port design helps minimise pressure loss and maximise Cv
- Internally loaded, blowout-proof stem for added overpressure protection
- Integral actuator mounting pads for future automation
- Suitable for chemical, petrochemical, pulp & paper, and general industrial applications
- Genuine Dwyer stock with free UAE-wide shipping
Who This Product Is Best For
- Chemical and petrochemical process lines requiring stainless steel construction and PTFE-based sealing
- Pulp & paper applications requiring durable process valve construction
- General industrial and utility piping requiring high-pressure ball valve shutoff
- Process systems where a full-port design helps minimise pressure loss
- Installations that may require actuator automation at a later stage
How to Specify & Commission It
- Confirm the BV2M102's 1/2" female NPT connection matches your pipe size and thread.
- Install the valve correctly in-line and ensure the full-port opening is aligned with the intended flow path.
- Operate the valve through its 90° travel to achieve fully open or fully closed operation.
- Check the valve for correct operation and leakage after installation.
- If automation is required later, use the integral actuator mounting pads with a compatible actuator.
Frequently Asked Questions
What is the maximum pressure rating of the BV2M102?
The BV2M102 is rated to 1000 psi (69 bar) WOG and 150 psi (10.3 bar) SWP.
What materials are used in the BV2M102?
The body, ball and end caps are CF8M stainless steel. The stem is 316 stainless steel, while the seat and thrust washer are RTFE and the end gasket and stem packing are PTFE.
Is the BV2M102 a full-port valve?
Yes. The full-port design helps minimise pressure loss and provides maximum flow capacity.
Can the valve be automated later?
Yes. Integral actuator mounting pads are included, allowing a compatible actuator to be added later without replacing the valve body.
What protects the valve against overpressure?
The BV2M102 uses an internally loaded, blowout-proof stem design.
What size and connection does the BV2M102 have?
The valve is 1/2" in size with female NPT end connections.
What applications is the BV2M102 suitable for?
It is suitable for chemical, petrochemical, pulp & paper, general industrial, process, and utility piping applications.
Is genuine Dwyer stock available in the UAE?
Yes. Genuine Dwyer stock is available from General Tech Services LLC, UAE, with free UAE-wide shipping. Call +971 6 5436933 for pricing and current availability.
Request a Quote Today
For pricing or to place an order for the Dwyer BV2M102, contact General Tech Services LLC.
Call +971 6 5436933 | www.generaltechshop.ae
