Client Protection
Dedicated Support
Genuine Products
Dwyer DA-31-153-9 | Bourdon Tube Pressure Switch | 10-300 psig | Lower Mount | Brass
The Dwyer DA-31-153-9 is a brass, lower-mount Bourdon tube pressure switch for 10 to 300 psig, rated 120-240 V AC/DC and fitted with a 1/4 in male NPT connection. It belongs to the Mercoid DA/DS range, valued for sensitivity and repeatability. Being a DA rather than a DS model, it offers separate adjustment of both operating points instead of a single one.
- 10 to 300 psig operating range
- Electrical rating 120-240 V AC/DC
- Two external adjustments set the high and low operating points
- Deadband adjustable across the whole range
- Specifications
- Features
- Downloads
| Part Number | DA-31-153-9 |
| Brand | Dwyer |
| Series | DA/DS (Mercoid) |
| Range | 10-300 psig |
| Material | Brass |
| Mounting | Lower mount |
| Electrical Rating | 120-240 V AC/DC |
| Process Connection | 1/4 in NPT male |
- A visible, calibrated dial allows for a quick and simple examination without opening the device, which puts operators in danger.
- With the exception of hermetically sealed snap switch versions, the on/off signal clearly indicates to the operator the condition of any switched equipment that might be placed elsewhere.
- Control applications benefit from adjustable or fixed deadband because it minimizes equipment wear and tear by eliminating needless recycling.
- Setup time is decreased by adjusting the external switch setpoint.
- Application designers can specify standard equipment with pressure ranges from complete vacuum to 8000 psig, which makes installation and training easier and lowers servicing costs.
- Many models are CSA approved and UL listed. FM authorized to support stringent standards and process applications.
- Enclosures that are all-purpose, weatherproof, or explosion-proof that may be used in a range of indoor and outdoor settings and satisfy the demands of many applications.
Related Products
Vaisala PDT102 | Differential Pressure Transmitter | 0.25% or 0.50% of span, MEMS silicon sensor, 9-point NIST calibration
Vaisala PDT102 | Differential Pressure Transmitter | 0.25% or 0.50% of span, MEMS silicon sensor, 9-point NIST calibration
Vaisala PDT101 | Differential Pressure Transmitter | 3 pressure ranges, Bidirectional models, DIN rail/panel/wall
Vaisala PDT101 | Differential Pressure Transmitter | 3 pressure ranges, Bidirectional models, DIN rail/panel/wall
FEMA Smart SN | Electronic Pressure Transducers | -1...+1 to 0-40 bar, G1/2
FEMA Smart SN | Electronic Pressure Transducers | -1...+1 to 0-40 bar, G1/2
FEMA DPTE | Differential Pressure Transmitters | 18-30 V DC, piezoresistive, SIL 1
FEMA DPTE | Differential Pressure Transmitters | 18-30 V DC, piezoresistive, SIL 1
FEMA PTI/PTU | Pressure Transmitters, 2-Wire and 3-Wire | PTI 2-wire current, PTU 3-wire voltage
FEMA PTI/PTU | Pressure Transmitters, 2-Wire and 3-Wire | PTI 2-wire current, PTU 3-wire voltage
FEMA DPTAQ | Piezoresistive Differential Pressure Transmitters | 0-10 / 4-20 output, DIN rail, SIL 1
FEMA DPTAQ | Piezoresistive Differential Pressure Transmitters | 0-10 / 4-20 output, DIN rail, SIL 1
FEMA Smart SN DIFF | Differential Pressure Transducers | 0-100 mbar to 0-20 bar, 6 ranges
FEMA Smart SN DIFF | Differential Pressure Transducers | 0-100 mbar to 0-20 bar, 6 ranges
FEMA Smart SN HMI | Differential Pressure Transmitter with HMI | 2 x G1/4, M12 plug, IP65
FEMA Smart SN HMI | Differential Pressure Transmitter with HMI | 2 x G1/4, M12 plug, IP65