Client Protection
Dedicated Support
Genuine Products
Dwyer DA-31-2-6 | Bourdon Tube Pressure Switch | 5-100 psig | Lower Mount | Brass
Dwyer DA-31-2-6 is a lower-mount Bourdon tube pressure switch in brass, covering 5 to 100 psig with an SPST contact rated 120-240 V AC/DC. As a DA model, it has external adjustments for both the high and low operating points. On the DA-31-2-6, the gap between high and low set points can be altered across the range.
- SPST contact, screw terminals
- 1/4 in NPT male connection
- CSA and UL listed
- Weight 4 lb
- Specifications
- Features
- Downloads
| Part Number | DA-31-2-6 |
| Brand | Dwyer |
| Series | DA/DS (Mercoid) |
| Range | 5-100 psig |
| Material | Brass |
| Mounting | Lower mount |
| Contact | SPST |
| Electrical Rating | 120-240 V AC/DC |
| Process Connection | 1/4 in NPT male |
| Approvals | CSA, UL |
| Net Weight | 4 lb |
- A visible, calibrated dial allows for a quick and simple examination without opening the device, which puts operators in danger.
- With the exception of hermetically sealed snap switch versions, the on/off signal clearly indicates to the operator the condition of any switched equipment that might be placed elsewhere.
- Control applications benefit from adjustable or fixed deadband because it minimizes equipment wear and tear by eliminating needless recycling.
- Set-up time is decreased by adjusting the external switch set-point.
- Application designers can specify standard equipment with pressure ranges from complete vacuum to 8000 psig, which makes installation and training easier and lowers servicing costs.
- CSA approved, UL listed, and FM approved for numerous models to support strict process applications and regulations.
- Enclosures that are all-purpose, weatherproof, or explosion-proof that may be used in a range of indoor and outdoor settings and satisfy the demands of many applications.
Related Products
Vaisala PDT102 | Differential Pressure Transmitter | 0.25% or 0.50% of span, MEMS silicon sensor, 9-point NIST calibration
Vaisala PDT102 | Differential Pressure Transmitter | 0.25% or 0.50% of span, MEMS silicon sensor, 9-point NIST calibration
Vaisala PDT101 | Differential Pressure Transmitter | 3 pressure ranges, Bidirectional models, DIN rail/panel/wall
Vaisala PDT101 | Differential Pressure Transmitter | 3 pressure ranges, Bidirectional models, DIN rail/panel/wall
FEMA Smart SN | Electronic Pressure Transducers | -1...+1 to 0-40 bar, G1/2
FEMA Smart SN | Electronic Pressure Transducers | -1...+1 to 0-40 bar, G1/2
FEMA DPTE | Differential Pressure Transmitters | 18-30 V DC, piezoresistive, SIL 1
FEMA DPTE | Differential Pressure Transmitters | 18-30 V DC, piezoresistive, SIL 1
FEMA PTI/PTU | Pressure Transmitters, 2-Wire and 3-Wire | PTI 2-wire current, PTU 3-wire voltage
FEMA PTI/PTU | Pressure Transmitters, 2-Wire and 3-Wire | PTI 2-wire current, PTU 3-wire voltage
FEMA DPTAQ | Piezoresistive Differential Pressure Transmitters | 0-10 / 4-20 output, DIN rail, SIL 1
FEMA DPTAQ | Piezoresistive Differential Pressure Transmitters | 0-10 / 4-20 output, DIN rail, SIL 1
FEMA Smart SN DIFF | Differential Pressure Transducers | 0-100 mbar to 0-20 bar, 6 ranges
FEMA Smart SN DIFF | Differential Pressure Transducers | 0-100 mbar to 0-20 bar, 6 ranges
FEMA Smart SN HMI | Differential Pressure Transmitter with HMI | 2 x G1/4, M12 plug, IP65
FEMA Smart SN HMI | Differential Pressure Transmitter with HMI | 2 x G1/4, M12 plug, IP65