Norbar 130517 Torque Tools Digital Torque Wrench, 5 → 100Nm, 3/8 in Drive, Square Drive

The Norbar 130517 ProTronic is an electronic torque wrench with a 5–100 N·m torque range and a 3/8" square drive. It features a large backlit LCD, dual progressive LEDs and an audible buzzer at the preset torque or angle, providing measured digital readings without app connectivity. Supplied by General Tech Services LLC, UAE. Request a quote in under a minute: call +971 6 5436933.

Part No. 130517

Contact Number: +971 6 5436933

The Norbar 130517 ProTronic helps technicians measure the torque applied to a fastener rather than relying solely on the click or signal of a conventional torque wrench. Its large backlit LCD displays the measured reading, while dual progressive LEDs on both sides of the wrench head show torque building towards the target, helping the operator apply force more carefully.

An audible buzzer indicates when the preset torque or angle is reached. The wrench conforms to ISO 6789-2:2017 and is suitable for applications requiring digital torque measurement without Bluetooth or app setup.

Power interruption technology helps protect work in progress if the wrench is knocked. A secured battery cap helps resist accidental loosening, and the comfortable handle supports a firm grip during operation. A storage case is included for protection and storage.

For interim performance checks between calibrations, the wrench can be checked using a TruCheck 2 Plus 43525 or a Pro-Test 400 Series 2 bench tester. ISO 6789-1:2017 guidance recommends recalibration after 12 months or 5,000 cycles, whichever comes first, or sooner following a drop or overload.

For an alternative feature set, compare the Norbar 130512 Smart, which offers the same stated 5–100 N·m torque range.

Key Benefits

• Measured digital torque: Covers 5–100 N·m for controlled tightening applications.

• Progressive LED indicators: Dual LEDs show torque increasing towards the target.

• Backlit LCD: Makes the digital reading easier to view in poor lighting.

• Audible alert: Sounds when the preset torque or angle is reached.

• Standards compliance: Conforms to ISO 6789-2:2017.

• Power interruption protection: Helps preserve work in progress if the wrench is impacted.

• Convenient storage: Supplied with a storage case.

• No app connectivity required: Provides digital measurement without Bluetooth or app setup.

For pricing and availability, contact General Tech Services LLC, UAE, at +971 6 5436933.

Who This Product Is Best For

• Assembly lines and maintenance teams that require measured torque readings.

• Workshops transitioning from conventional click wrenches to digital torque tools.

• Technicians tightening fasteners within the 5–100 N·m range using 3/8" sockets.

• Applications requiring a preset torque or angle alert.

• Training centres teaching accurate torque application and tightening practices.

How to Specify & Install It

1. Confirm the torque requirement: Check that the required tightening value falls within the 5–100 N·m operating range.

2. Check drive compatibility: Select a suitable socket for the 3/8" square drive and the fastener being tightened.

3. Set the required target: Switch on the wrench, select the appropriate unit and configure the target torque or angle according to the application requirements.

4. Position the wrench correctly: Fit the socket securely and align it with the fastener.

5. Apply torque smoothly: Watch the progressive LEDs as the torque builds, and respond to the audible alert at the preset target.

6. Check the final reading: Review the displayed value and confirm that the tightening procedure meets the required specification.

7. Maintain calibration: Arrange recalibration at the recommended interval and after a drop or overload. Interim checks can be performed using a compatible torque tester.

Frequently Asked Questions

1. What torque range does the Norbar 130517 cover?

It covers 5–100 N·m and uses a 3/8" square drive.

2. Is the Norbar 130517 a smart or digital wrench?

It is a ProTronic digital torque wrench featuring a backlit LCD, dual progressive LEDs and an audible buzzer. It does not require Bluetooth or app connectivity.

3. Does the wrench support angle-controlled tightening?

It provides an audible alert when the preset torque or angle is reached. Select the appropriate setting according to the application's tightening procedure.

4. What happens if the wrench is knocked during a job?

Its power interruption technology helps protect work in progress if the wrench is impacted.

5. Which Norbar electronic wrench should I choose?

Choose a model that suits your required torque range, drive size and features. The 130517 provides digital readings without app connectivity, while the 130512 Smart is an alternative in the same stated 5–100 N·m range.

6. How often should the Norbar 130517 be recalibrated?

ISO 6789-1:2017 guidance recommends recalibration after 12 months or 5,000 cycles, whichever comes first. Recalibration may be needed sooner after a drop or overload.

7. Is a storage case included?

Yes. The Norbar 130517 is supplied with a storage case.

8. How can I get a price in the UAE?

Contact General Tech Services LLC for pricing and availability by calling +971 6 5436933.

For the Norbar 130517 ProTronic electronic torque wrench, contact General Tech Services LLC, UAE, for a quotation and product availability.

+971 6 5436933