Norbar 130518 Torque Tools Digital Torque Wrench, 5 → 100Nm, 1/2 in Drive, Square Drive
The Norbar 130518 ProTronic is an electronic torque wrench designed for 5–100 N·m, featuring a 1/2" square drive, a large backlit LCD, dual progressive LEDs and an audible buzzer at the preset torque or angle. It provides measured digital torque readings without requiring Bluetooth or app connectivity. Supplied by General Tech Services LLC, UAE. Request a quote in under a minute: call +971 6 5436933.
Part No. 130518
Contact Number: +971 6 5436933
The Norbar 130518 ProTronic is designed for technicians who need reliable digital torque measurement for lighter fastening applications using compatible 1/2" sockets. Its 5–100 N·m torque range makes it suitable for assembly work, industrial maintenance and workshops transitioning from conventional click wrenches to digital torque tools.
Unlike a conventional click wrench that signals when a setting is reached, the ProTronic measures the applied torque and displays the reading on its large backlit LCD. Dual progressive LEDs on both sides of the wrench head illuminate as torque builds towards the target, helping the operator monitor progress and apply force more carefully.
An audible buzzer indicates when the preset torque or angle is reached. The wrench conforms to ISO 6789-2:2017 and suits technicians who want a digital readout without Bluetooth connectivity or app setup. Digital readings can also support torque verification and auditing by showing the measured value rather than relying only on the occurrence of a click.
Power interruption technology helps protect work in progress if the wrench is knocked. A secured battery cap helps resist accidental loosening, while the comfortable handle supports a firm grip during operation. A storage case is included.
For interim performance checks between formal calibrations, the wrench can be checked using a TruCheck 2 Plus 43525 or a Pro-Test 400 Series 2 bench tester. ISO 6789-1:2017 guidance recommends recalibration after 12 months or 5,000 cycles, whichever comes first, or sooner following a drop or overload.
If you require a different drive size, compare the Norbar 130517 Digital, which features a 3/8" square drive and the same stated 5–100 N·m torque range.
Key Benefits
-
Measured digital torque: Covers 5–100 N·m for controlled fastening applications.
-
Progressive LED indicators: Dual LEDs show torque building towards the target.
-
Backlit LCD: Makes readings easier to view in poor lighting.
-
Audible buzzer: Signals when the preset torque or angle is reached.
-
No app connectivity required: Provides digital measurement without Bluetooth setup.
-
Standards compliance: Conforms to ISO 6789-2:2017.
-
Power interruption protection: Helps protect work in progress if the wrench is impacted.
-
Storage case included: Supports convenient storage and transport.
For pricing and availability, contact General Tech Services LLC, UAE, at +971 6 5436933.
Who This Product Is Best For
-
Assembly lines and maintenance teams requiring measured torque readings.
-
Workshops transitioning from conventional click wrenches to digital readouts.
-
Technicians working with fasteners requiring 5–100 N·m and compatible 1/2" sockets.
-
Applications where a preset torque or angle alert is required.
-
Training centres teaching accurate torque application and tightening practices.
-
Teams that need digital torque measurement without Bluetooth or app connectivity.
How to Specify & Install It
-
Confirm the torque requirement: Ensure the required torque falls within the 5–100 N·m range.
-
Check drive compatibility: Select a suitable socket for the 1/2" square drive and the fastener being tightened.
-
Configure the wrench: Switch on, select the appropriate unit and set the target torque or angle according to the application requirements.
-
Fit the socket: Ensure the socket is securely seated on the drive and correctly positioned on the fastener.
-
Apply torque smoothly: Monitor the progressive LEDs as torque builds towards the target, and respond to the audible alert.
-
Review the reading: Check the displayed value and confirm that the tightening procedure meets the specified requirements.
-
Maintain calibration: Perform interim checks with a compatible torque tester and arrange recalibration at the recommended interval, or sooner after a drop or overload.
Frequently Asked Questions
1. What torque range does the Norbar 130518 cover?
It covers 5–100 N·m and uses a 1/2" square drive.
2. Is the Norbar 130518 a smart or digital wrench?
It is a ProTronic digital torque wrench with a backlit LCD, dual progressive LEDs and an audible buzzer. It does not require Bluetooth or app connectivity.
3. Does it support angle-controlled tightening?
It provides an audible alert when the preset torque or angle is reached. Configure the required setting according to the application's tightening procedure.
4. What happens if the wrench is knocked during a job?
Power interruption technology helps protect work in progress if the wrench is impacted.
5. Which Norbar electronic wrench should I choose?
Choose a model based on your required torque range, drive size and features. The 130518 offers a 5–100 N·m range with a 1/2" square drive, while the Norbar 130517 Digital offers the same stated torque range with a 3/8" square drive.
6. How often should the wrench be recalibrated?
ISO 6789-1:2017 guidance recommends recalibration after 12 months or 5,000 cycles, whichever comes first. Recalibration may be needed sooner after a drop or overload.
7. Is a storage case included?
Yes. A storage case is supplied with the Norbar 130518.
8. Which torque testers can be used for interim checks?
The TruCheck 2 Plus 43525 and Pro-Test 400 Series 2 are listed as compatible options for interim checking.
9. How can I get a price in the UAE?
Contact General Tech Services LLC for pricing and availability by calling +971 6 5436933.
For the Norbar 130518 ProTronic electronic torque wrench, contact General Tech Services LLC, UAE, for a quotation and product availability.
+971 6 5436933
