Norbar EvoTorque 2 with Right Angle Gearbox,100.00 - 1000.00 N·m, 3/4" Square Drive
The Norbar EvoTorque 2 ET2-72 right-angle torque tool is a mains-powered electronic tightening solution delivering 100–1,000 N·m through a 3/4" square drive with ±3% accuracy. It features a right-angle gearbox with 360° handle rotation for restricted access, on-board data storage and USB/Bluetooth connectivity. Available in 110 V and 230 V configurations, it is supplied by General Tech Services LLC, UAE. Request a quote by calling +971 6 5436933.
Part No. ET2-72
Contact Number: +971 6 5436933
When a bolted joint requires precise tightening, relying on estimated torque can lead to inconsistent results. The Norbar EvoTorque 2 ET2-72 measures torque at the output and controls the tightening cycle to help achieve the selected target.
This model covers 100–1,000 N·m through a 3/4" square drive, making it suitable for pump and valve flanges, gearbox covers and vehicle or plant maintenance fasteners within its rated capacity. It is available in 110 V and 230 V configurations, allowing you to select a version compatible with your site's electrical supply.
The EvoTorque 2 offers Torque, Torque & Angle and Torque Audit modes. Results are displayed and stored with date and time information, with capacity for up to 3,000 readings. USB and Bluetooth 4.0 connectivity allow results to be transferred to a PC, while Norbar's EvoLog software supports tool setup and data management. The optional Turn Angle function helps check whether a bolt has already been tightened.
The right-angle gearbox allows the handle to rotate 360° relative to the output, helping operators position the tool in confined spaces around flanges, machinery frames and pipework. For a straight-tool alternative, compare it with the ET2-72-1000-230 and confirm the exact configuration before ordering.
Key Benefits
-
100–1,000 N·m torque range for industrial maintenance and bolting applications.
-
±3% accuracy within the specified calibrated range and operating conditions.
-
Right-angle gearbox with 360° handle rotation for improved access in restricted spaces.
-
Intelligent joint sensing to support consistent tightening on hard and soft joints.
-
Torque, Torque & Angle and Torque Audit operating modes.
-
On-board storage for up to 3,000 date- and time-stamped readings.
-
USB and Bluetooth 4.0 connectivity with EvoLog PC software.
-
Traceable torque and angle calibration certificate supplied as standard, as specified for this model.
-
Choice of 110 V or 230 V configurations, subject to confirmation.
For pricing and availability, contact General Tech Services LLC at +971 6 5436933.
Who This Product Is Best For
-
Maintenance and shutdown teams working on pump and valve flanges.
-
Industrial technicians servicing gearboxes, machinery and plant equipment.
-
EPC contractors and quality assurance teams requiring stored, traceable torque records.
-
Operators working in confined spaces where a straight torque tool may be difficult to position.
-
Buyers requiring electronic torque control and a choice of power-supply configurations.
How to Specify & Install It
-
Confirm the torque requirement: Ensure the required tightening torque falls within the tool's calibrated operating range.
-
Select the voltage: Choose the 110 V or 230 V configuration compatible with the site's electrical supply.
-
Check the drive connection: Use a compatible 3/4" square-drive socket suitable for the fastener and application.
-
Fit the reaction arm: Install the appropriate reaction arm and position it against a suitable, solid reaction point.
-
Configure the tool: Switch it on, select the required mode and enter the target torque and angle settings, where applicable.
-
Position and operate: Adjust the handle for suitable access and operate the tool according to the manufacturer's instructions.
-
Verify and record: Confirm that the tightening cycle has completed as intended, review the result and transfer stored readings through USB or Bluetooth using EvoLog software when required.
Frequently Asked Questions
What torque range does the Norbar ET2-72 right-angle version cover?
The supplied listing specifies 100–1,000 N·m through a 3/4" square drive. The calibrated range is stated as 20%–100% of maximum capacity in the clockwise direction. Confirm your required target torque against the calibration documentation.
How accurate is the EvoTorque 2?
The listed accuracy is ±3% of the set value within the specified calibrated range and operating conditions. The stated performance applies to joints with a rotation of 30° or more.
Can the tool store and export torque data?
Yes. It stores up to 3,000 date- and time-stamped readings. Data can be transferred to a PC through USB or Bluetooth 4.0 and managed using Norbar EvoLog software.
Why choose the right-angle gearbox version?
The right-angle gearbox allows the handle to rotate 360° relative to the output. This helps with tool positioning in confined spaces where a straight tool may be difficult to use.
Which voltage should I choose?
The listing indicates 110 V and 230 V configurations. Confirm the required version and ensure it matches the available site supply before ordering.
How can I obtain pricing and lead time in the UAE?
Contact General Tech Services LLC to confirm the exact right-angle configuration, voltage, current availability and delivery lead time.
For the Norbar EvoTorque 2 ET2-72 right-angle torque tool, contact General Tech Services LLC, UAE, for a quotation and availability details. Call +971 6 5436933.
