Norbar EvoTorque ET2-72-1000-230 Electronic Torque Multiplier 100-1000NM, 3/4" Square Drive
The Norbar EvoTorque 2 ET2-72-1000-230 is a mains-powered electronic torque tool designed to deliver 100–1,000 N·m through a 3/4" square drive with ±3% accuracy. Operating on a 230 V supply, it features multiple tightening modes, on-board data storage and USB/Bluetooth connectivity for torque traceability. Supplied by General Tech Services LLC, UAE. Request a quote by calling +971 6 5436933.
Part No. 180220.B06
The Norbar EvoTorque 2 ET2-72-1000-230 supports controlled, repeatable bolting for maintenance teams, industrial facilities and fabrication workshops. Its 100–1,000 N·m torque range suits applications such as pump and valve flanges, gearbox covers and other high-torque fasteners within the tool's capacity.
Powered by a 230 V mains supply, this model is suitable for workshops and industrial sites with compatible electrical connections. Its intelligent joint-sensing technology helps maintain consistent tightening performance across different joint conditions.
The tool offers Torque, Torque & Angle and Torque Audit modes. Results are displayed and stored with date and time information, with memory for up to 3,000 readings. USB and Bluetooth 4.0 connectivity allow data transfer to a PC, while Norbar's EvoLog software supports tool setup and data management. The optional Turn Angle function helps check whether a fastener has already been tightened.
Before ordering, confirm that the required torque falls within the calibrated range and that the 230 V supply and 3/4" square drive suit your application.
Key Benefits
-
100–1,000 N·m torque range for demanding industrial bolting applications.
-
±3% accuracy within the specified calibrated operating conditions.
-
Intelligent joint sensing to support consistent tightening on hard and soft joints.
-
Three operating modes: Torque, Torque & Angle and Torque Audit.
-
On-board memory for up to 3,000 date- and time-stamped readings.
-
USB and Bluetooth 4.0 connectivity for transferring records to EvoLog software.
-
Traceable torque and angle calibration certificate supplied as standard, as specified for this model.
-
230 V mains operation for compatible workshop and industrial power supplies.
For pricing and availability, contact General Tech Services LLC at +971 6 5436933.
Who This Product Is Best For
-
Maintenance and shutdown teams tightening pump and valve flanges.
-
EPC contractors and quality assurance teams requiring recorded torque results.
-
Industrial workshops and plant rooms with a compatible 230 V supply.
-
Maintenance professionals performing repetitive high-torque bolting.
-
Teams that need digital records to support inspection and quality-control procedures.
How to Use It
-
Fit the appropriate reaction arm and a compatible impact-rated socket for the fastener.
-
Connect the tool to the correct 230 V supply, switch it on and select the required tightening mode.
-
Enter the target torque and, when applicable, the required angle settings.
-
Position the reaction arm against a suitable, solid reaction point and operate the tool according to the manufacturer's instructions.
-
Confirm that the tightening cycle has completed as intended and check the displayed result.
-
Review the stored reading and transfer the recorded data to a PC through USB or Bluetooth using EvoLog software when required.
Frequently Asked Questions
What is the torque range of the Norbar ET2-72-1000-230?
This model covers 100–1,000 N·m and uses a 3/4" square drive. The specified calibrated range is 20%–100% of maximum capacity in the clockwise direction, so confirm suitability for the required target torque.
How accurate is this torque tool?
The listed accuracy is ±3% of the set value within the specified calibrated range and operating conditions. The stated performance applies to joints with a rotation of 30° or more.
Can the tool store and export torque readings?
Yes. It stores up to 3,000 readings with date and time information. Records can be transferred to a PC using USB or Bluetooth 4.0 and managed through Norbar EvoLog software.
Which power supply does this version require?
The ET2-72-1000-230 is designed for a 230 V mains supply. Verify the site's electrical supply and connection requirements before use.
What tightening modes are available?
The tool provides Torque, Torque & Angle and Torque Audit modes. The optional Turn Angle function helps identify fasteners that may have already been tightened.
How can I obtain pricing and availability in the UAE?
Contact General Tech Services LLC for a current quotation, lead time and confirmation of the required configuration.
For the Norbar EvoTorque 2 ET2-72-1000-230, Part No. 180220.B06, contact General Tech Services LLC, UAE, for pricing and availability. Call +971 6 5436933.
