Client Protection
Dedicated Support
Snap-on EEPV508 | Automatic Transmission Pressure Gauge Set | 500 PSI and 100 PSI gauges, 10 ft hose
EEPV508 is an automatic transmission pressure gauge set with two gauge assemblies, one for 500 PSI high pressure and one for 100 PSI low pressure. The high-pressure gauge has a 3.5 inch dial and a 10 foot flexible hose with fluid coupler. Snap-on files EEPV508 in its catalogue under Testing and Electronics, Fuel and Engine Systems, Cylinder Leakage/Engine Vacuum Gauges and Tester, Pressure Gauge Sets.
Key features
- Two gauges: 500 PSI and 100 PSI
- Four special fittings for 45 or 90 degree test ports
- Instruction manual with applications table and storage case
- 10 ft flexible hose with fluid coupler
- Specifications
| Part Number | EEPV508 |
| Brand | Snap-on |
| Country of Origin | USA |
Related Products
Snap-on YA9385 | Oxygen Sensor Socket (Blue-Point) | 1/2 in drive, 22 mm
Snap-on YA9385 | Oxygen Sensor Socket (Blue-Point) | 1/2 in drive, 22 mm
Snap-on YA8875B | Spline Oxygen Sensor Wrench (Blue-Point) | Blue-Point range
Snap-on YA8875B | Spline Oxygen Sensor Wrench (Blue-Point) | Blue-Point range
Snap-on YA6775A | Spline Oxygen Sensor Wrench (Blue-Point) | 22 mm, pivoting handle
Snap-on YA6775A | Spline Oxygen Sensor Wrench (Blue-Point) | 22 mm, pivoting handle
Snap-on YA6190 | Injector Pressure Regulator (IPR) Socket | 3/8 in drive, 12-point
Snap-on YA6190 | Injector Pressure Regulator (IPR) Socket | 3/8 in drive, 12-point
Snap-on YA1239 | Dual Drive Oxygen Sensor Wrench (Blue-Point) | 1/2 in and 3/8 in drive
Snap-on YA1239 | Dual Drive Oxygen Sensor Wrench (Blue-Point) | 1/2 in and 3/8 in drive
Snap-on YA9375B | Oxygen Sensor Wrench (Blue-Point) | 3/8 in drive, 2-1/8 in hex
Snap-on YA9375B | Oxygen Sensor Wrench (Blue-Point) | 3/8 in drive, 2-1/8 in hex
Snap-on SWR5 | Offset Oxygen Sensor Socket | 1/2 in drive, 6-point, 15/16 in
Snap-on SWR5 | Offset Oxygen Sensor Socket | 1/2 in drive, 6-point, 15/16 in
Snap-on SWR1A | Oxygen Sensor Wrench | 7/8 in hex, 10-3/4 in long
Snap-on SWR1A | Oxygen Sensor Wrench | 7/8 in hex, 10-3/4 in long