Client Protection
Dedicated Support
Snap-on KRSC46HZGG | Six-Drawer Roll Cart | 40 in wide, 6 drawers
KRSC46HZGG is a 40 inch wide, 46 inch tall roll cart with six drawers, finished with a gloss black case, purple drawers and black trim. A 7 inch deep flip-top compartment with gas springs sits on top, and Snap-on rates the cart at 2,400 lb total load. Note that Snap-on files this item under a thread chaser category, but it is a tool storage cart.
Key features
- Drawers 35 inches wide, 120 lb each (240 lb with double slides)
- Lock 'N Roll system keeps drawers from drifting open
- Round key lock; one-piece welded body
- Flip-top compartment can hold a battery charger
- Optional side panels, power strip and rubber work mat (not included)
- Specifications
| Part Number | KRSC46HZGG |
| Brand | Snap-on |
| Top Compartment Height, inches (mm) | 4-13/16 (122) |
| Depth, inches (mm) | 20 (508) |
| Width, inches (mm) | 40 (1,029) |
| Work Surface | Flip-Top/Color-Matched Steel |
| Country of Origin | USA |
| Casters | 2 Swivel/2 Rigid |
| Height, inches (mm) | 46 (1,168) |
| Net Weight, lb (kg) | 265 (120) |
| Load Capacity, lb (kg) | 2,400 (1,089) |
| Approx. Square inches (cm²) | 4,392 (28,335) |
| Approx. Cubic inches (cm³) | 20,783 (340,572) |
| Drawer Count | 6 |
Related Products
Snap-on T133A | NPT Pipe Thread Tap | 3/4"-14 NPT
Snap-on T133A | NPT Pipe Thread Tap | 3/4"-14 NPT
Snap-on TDRSET | Tap and Die Drive Tool Set | 7 pc, T-Bar Handle, Pitch Gauges
Snap-on TDRSET | Tap and Die Drive Tool Set | 7 pc, T-Bar Handle, Pitch Gauges
Snap-on DR033A | NPT Pipe Thread Die | 1/4"-18 NPT, 1.5" Round Adjustable
Snap-on DR033A | NPT Pipe Thread Die | 1/4"-18 NPT, 1.5" Round Adjustable
Snap-on T129A | National Fine Thread Tap | 1"-14 NF
Snap-on T129A | National Fine Thread Tap | 1"-14 NF
Snap-on T127A | National Fine Thread Tap | 3/4"-16 NF
Snap-on T127A | National Fine Thread Tap | 3/4"-16 NF
Snap-on D020A | NPT Pipe Thread Die | 1/8"-27 NPT, 1" Double Hex Adjustable
Snap-on D020A | NPT Pipe Thread Die | 1/8"-27 NPT, 1" Double Hex Adjustable
Snap-on DR042A | National Fine Thread Die | 7/8"-14 NF, 2" Round Adjustable
Snap-on DR042A | National Fine Thread Die | 7/8"-14 NF, 2" Round Adjustable
Snap-on T128A | National Fine Thread Tap | 7/8"-14 NF
Snap-on T128A | National Fine Thread Tap | 7/8"-14 NF