Dwyer Instruments CDTC-5N000-LCD | Communicating carbon dioxide transmitter with temperature output | 5000 PPM range | North American housing and LCD display
The Dwyer CDTC-5N000-LCD is a communicating CO₂ and temperature transmitter with a 0-5000 ppm CO₂ range, Modbus RTU or BACnet MS/TP communication over RS-485, and an integral LCD display. It combines CO₂, temperature and temperature set-point monitoring in a single North American wall-mount housing for building automation and demand-controlled ventilation applications. Genuine stock at General Tech Services LLC, UAE, with free UAE-wide shipping. Request a quote in under a minute - call +971 6 5436933.
Part No. CDTC-5N000-LCD
Product Overview
The Dwyer CDTC-5N000-LCD is part of the Series CDTC Communicating Carbon Dioxide Sensors, combining the functions of multiple room sensors in one compact wall-mount housing. It measures CO₂ from 0-5000 ppm and temperature while providing a temperature set point and override function.
The CDTC-5N000-LCD uses a North American wall-mount housing with an integral LCD display. The display can show CO₂ concentration, temperature or temperature set point, providing local access to key room measurements.
Communication is provided through 2-wire RS-485 using either Modbus RTU or BACnet MS/TP, selectable through onboard DIP switches. The RS-485 MAC address can also be configured using the DIP switches. A 4-wire connection and daisy-chain capability can help reduce wiring requirements in multi-device installations.
Barometric pressure can be programmed to compensate for altitude, helping maintain accurate CO₂ measurements at different installation elevations.
The CDTC-5N000 is the corresponding configuration without the integral LCD display.
Key Benefits
- Measures CO₂ from 0-5000 ppm and room temperature
- Provides temperature set point and override functionality
- Modbus RTU or BACnet MS/TP communication over RS-485
- Integral LCD display for local readings
- 4-wire connection with daisy-chain capability
- Onboard DIP switches for MAC address and communication protocol selection
- Programmable barometric pressure for altitude compensation
- Combines CO₂ and temperature sensing in one wall-mounted device
- North American wall-mount housing
- CDTC-5N000 available as the version without an integral LCD
- Genuine Dwyer stock with free UAE-wide shipping
Who This Product Is Best For
- Commercial buildings requiring room CO₂ monitoring
- Demand-controlled ventilation systems
- Building management systems using Modbus RTU or BACnet MS/TP
- HVAC automation and indoor-air monitoring applications
- Projects requiring CO₂ and temperature measurements from one wall-mounted device
- Installations using RS-485 daisy-chain communication
How to Specify & Commission It
- Confirm the required CO₂ and temperature monitoring functions and select a suitable wall location.
- Mount the North American housing vertically on the wall according to the installation instructions.
- Connect the power supply and RS-485 communication wiring, using the 4-wire connection and daisy-chain arrangement where required.
- Set the RS-485 MAC address using the onboard DIP switches.
- Select Modbus RTU or BACnet MS/TP using the appropriate DIP-switch configuration.
- Configure the barometric pressure setting for the installation altitude and verify the CO₂ and temperature readings.
- Confirm the temperature set point and override operation before integrating the sensor into the building automation system.
Frequently Asked Questions
What does the Dwyer CDTC-5N000-LCD measure?
It measures CO₂ from 0-5000 ppm and temperature, and provides a temperature set point with override functionality.
What communication protocols are supported?
The transmitter supports Modbus RTU or BACnet MS/TP over RS-485, selectable using onboard DIP switches.
What is the CO₂ accuracy?
The specified CO₂ accuracy is ±40 ppm ±3% of reading.
Does the CDTC-5N000-LCD have a display?
Yes. It includes an integral LCD display that can show CO₂ concentration, temperature or temperature set point.
Can multiple sensors be connected together?
Yes. The sensor supports RS-485 communication with a 4-wire connection and daisy-chain capability.
Can the MAC address be configured?
Yes. The RS-485 MAC address can be set using onboard DIP switches.
Can barometric pressure be adjusted?
Yes. Barometric pressure can be programmed to compensate for altitude and support accurate CO₂ measurement.
What is the difference between the CDTC-5N000-LCD and CDTC-5N000?
The CDTC-5N000-LCD includes an integral LCD display. The CDTC-5N000 provides the same core communicating sensor configuration without the integral display.
Is genuine stock available with UAE shipping?
Yes. Genuine Dwyer stock is available from General Tech Services LLC with free UAE-wide shipping. Call +971 6 5436933 for pricing and current availability.
Request a Quote Today
For pricing or to place an order, contact General Tech Services LLC.
Call +971 6 5436933 | www.generaltechshop.ae
