Mitutoyo 568-967 Digital ABS Borematic (Internal) Set Inch/Metric, 1-2", Complete Unit Set

The Mitutoyo 568-967 is a digital ABSOLUTE three-point bore gauge for internal diameters between 1′′ and 2′′, one of the most common bore ranges on a machine shop floor. It gives instant, drift-free readings without the re-zeroing a dial gauge demands.

Request a quote in under a minute — call +971 6 5436933.

Part No. 568-967 | Range 1" – 2"

The 1′′–2′′ bore range covers a large share of everyday machined parts, which is exactly where a slow, dial-based gauge costs the most production time. The Mitutoyo 568-967 Digital ABS Borematic (Internal) Set is a three-point contact bore gauge with its own digital display head, designed for machinists, quality inspectors, and calibration labs who need dependable inside- diameter readings on this range without repeated manual zeroing.

The 568-967 pairs a titanium-coated measuring head with an ABSOLUTE digital display, so the reading appears the moment the gauge is inserted into the bore, with no drift between checks. The 330° rotatable display lets the operator read the value comfortably at any angle, whether the part sits on a bench or is clamped in a fixture that makes a straight-on view awkward.

A GO/+/-NG judgment function is built into the LCD, so an operator confirms a pass or fail
decision instantly instead of cross-checking a separate tolerance chart. With approximately
5,000 hours of battery life and a DATA output/HOLD function for SPC logging, the set is built for high-frequency use on a busy inspection line rather than occasional spot checks.

If your part falls outside 1′′–2′′, the same ABSOLUTE Borematic series also covers 2′′–3′′ in the Mitutoyo 568-968 and 0.5′′–1′′ in the Mitutoyo 568-966, so you can match the set to your exact bore diameter before ordering.

Ready to order the 568-967? Speak to our metrology team. Call +971 6 5436933

Key Benefits

• Instant, drift-free readings — the ABSOLUTE digital display removes the guesswork and re- zeroing of dial-based bore gauges
• Read from any angle — a 330° rotatable display head means no awkward twisting during inspection
• Built to last — titanium-coated measuring pins and a tungsten carbide taper resist wear from daily use
• Faster quality checks — GO/+/-NG judgment flags out-of-tolerance parts immediately, no chart cross-checking needed
•  Data-ready — DATA output with cable and HOLD function support SPC and quality documentation
• Long runtime — approximately 5,000 hours of battery life reduces downtime for battery changes

Ready to order the 568-967? — call +971 6 5436933.

Who This Product Is Best For

• CNC machine shops and manufacturers checking bore tolerances between 1′′ and 2′′ on a routine basis
• Quality control and inspection teams who need GO/NG pass-fail decisions directly on the production line
• Calibration and metrology labs requiring ABSOLUTE-encoder accuracy with a certificate of inspection
• Buyers upgrading from analog dial bore gauges who want faster readings and less operator error

How to Measure a Bore With This Gauge

1. Select the measuring head for your range and zero the display against the setting ring.
2. Insert the three-point head into the bore and let the contact points settle against the wall.
3. Read the LCD instantly — the ABSOLUTE display shows the diameter directly, with a GO/+/-NG result if tolerance limits are set.

Frequently Asked Questions

What range does the Mitutoyo 568-967 bore gauge measure?

The 568-967 measures internal bores from 1′′ to 2′′, with Inch/Metric switching built into the digital display.

How is a digital ABS Borematic different from a dial bore gauge?

A dial bore gauge relies on a mechanical indicator and manual zeroing. The ABS Borematic
uses an ABSOLUTE digital encoder, so readings appear instantly without re-zeroing between measurements, which cuts setup time and reading error.

Does this set include a GO/NG tolerance check?

Yes. The 568-967 has a built-in GO/+/-NG judgment function on its LCD, so operators see a pass/fail result immediately rather than comparing readings to a separate chart.

What comes in the complete unit set?

The set includes the measuring unit, a storage box, key, one battery, a setting ring, and a
certificate of inspection.

How long does the battery last?

Approximately 5,000 hours of continuous use before a replacement is needed.

Which bore gauge should I choose if my part is a different size?

Use the 568-969 for 3′′–4′′ bores, the 568-968 for 2′′–3′′ bores, the 568-966 for 0.5′′–1′′ bores, or the 568-965 for 0.275′′–0.5′′ bores. Each set uses the same ABSOLUTE digital display and GO/NG function.

Can this gauge be calibrated after purchase?

Yes. The set ships with a certificate of inspection and can be re-calibrated through a 17025-accredited calibration service to maintain measurement accuracy over time.

For pricing or to place an order, contact General Tech Services LLC. Call +971 6 5436933