Omron E3FA-RP21, Retroreflective Photoelectric Sensor, Barrel Sensor, 100 mm → 4 m Detection Range - generaltechuae

Client Protection

Dedicated Support

Client Protection

Dedicated Support

OMRON E3FA-RP21 | Retroreflective Photoelectric Sensor | 100 mm to 4 m, PNP, M12 4-Pin Connector

Name: OMRON E3FA-RP21 | Retroreflective Photoelectric Sensor | 100 mm to 4 m, PNP, M12 4-Pin Connector
Brand: OMRON
SKU: E3FA-RP21
Availability: InStock

Part Number : E3FA-RP21

The OMRON E3FA-RP21 is an M18 axial barrel-style retroreflective photoelectric sensor with a detection range of 100 mm to 4 m and PNP output. Wiring is through an M12 4-pin connector and the body is made of ABS. The E3FA-RP21 belongs to OMRON's E3F series.

Light source: LED
Maximum voltage: 30 V DC
Current rating up to 25 mA
Response time: 500 μs
Protection rating: IP67 and IP69K
Operating temperature: -25°C to +55°C

Availability: low stock

Detailed Description
Specifications
Features
Downloads

E3FA Compact Photoelectric Sensors

The E3FA range of compact photoelectric sensors from Omron are simple and quick to mount and easy to set up due to the large adjuster and high power LED indicator making alignment easier. The status LED indicators of these photoelectric sensors can also be seen easily, from long distances and wide angles. The E3FA series sensors are typically installed in industrial plants such as food and beverage, textiles, food and logistics and are also designed especially for non stop detection for areas where machines never stop.

Cylindrical straight type
Compact design
Plastic housing
Visible LED light for easy alignment
LED indication
Light-ON/Dark-ON selectable by wiring
Reversed power supply polarity protection, output short circuit protection and reversed output polarity protection

OMRON Photoelectric Sensor, LED Beam, PNP Output Type - E3F Series - E3FA-RP21

Round off your conveyor setup with this barrel sensor from OMRON. It detects the presence of objects using the photoelectric method, sensing items at distances between 100mm and 4m so you can customise it to work with your belt width. This retroreflective device combines an emitter and receiver, saving installation time and space. You can use reflector tape (215-5391) to bounce the beam back, keeping the system compact. As the sensor is suitable for flush mounting on the side of the conveyor, you can streamline your automation further.

Features & Benefits

• IP69K rating means it's dust-tight and resistant to hot, high-pressure water jets
• MSR function and polarised LED for reliably detecting objects with mirror-like surfaces
• Dark-on and light-on functions for customising your detection and signalling processes
• Visible red beam makes it a doddle to line up your target
• Strong ABS housing is resistant to wear and impact

Applications

• Assembly lines
• Packaging equipment
• Food processing
• Warehouses

How do I adjust the settings on this photoelectric sensor?

You can manually adjust the settings via a switch on the sensor's housing. For convenience, there are grooves on the switch for you to turn it with a slotted or Phillips screwdriver.

E3F2 Series Barrel

Output can be configured by wiring either ’light ON’ or ’dark ON’
Built in amplifier
Short circuit and reverse polarity protection
M18 DIN size cylindrical housing

Brand	Omron
Sensor Style	Barrel
Detection Type	Retroreflective
Detection Range	100 mm → 4 m
Output Type	PNP
Switching Mode	Light / Dark switching
Electrical Connection	M12 4 Pin Connector
Maximum DC Voltage	30V
Light Source	LED
IP Rating	IP67, IP69K
Maximum Current	25 mA
Response Time	500 μs
Minimum Operating Temperature	-25°C
Maximum Operating Temperature	+55°C
Mounting Type	Flange Mount
Housing Material	ABS
Series	E3F
Thread Size	M18
Standards Met	CE

Photoelectric sensor, M18 axial, plastic body, red LED, retro-reflective, 0.1-4m, PNP, L-ON/D-ON selectable, M12 connector

OMRON E3FA-RP21 | Retroreflective Photoelectric Sensor | 100 mm to 4 m, PNP, M12 4-Pin Connector

DOWNLOAD CATALOG

E3FA-RP21 Brochure - E3Z Photoelectric Sensors A700000010360904