Out of Stock
Support surface flatness according to DIN 876-2.
Has two T-grooves to retain the post and support assembly and center supports.
Support arm with joint fitting.
Holder with precision adjustability and an 8 mm shaft diameter for the display device.
Both of the central supports can be altered.
Retractable clamping tip is included in the right center support.
The counter-tip of the left center support is fixed.
Center supports for workpieces without center bore (for outer diameter up to 20 mm) with a peak height of 75 mm and 90° V-blocks.
| Height of centers | 75 mm |
| Permitted height difference | 0.05 mm |
| Permitted lateral difference | 0.05 mm |
| Distance between centers | 0 - 350 |
| Max. workpiece load per tailstock | 5 kg |
| Product weight | 12 kg |
| Structural dimensions (L x W) mm | 500 x 110 |
| Mounting hole | 8H7 |
| T-groove width | 10H7 |
| Dimensions | d 16 mm | |
ADDRESS
General Tech Services L.L.C
UAE Office:
P.O. Box: 93275
Abu Dhabi, UAE
Tel: +971 (0) 2 550 7702
Fax: +971 (0) 2 550 7706
Email: mathews@generaltechuae.com
Website: www.generaltechshop.ae
