logo

Brand

  

Indicator Units

  

Standard Insert

  
  
  
  
  

Radial Homogeneity (similar pockets)

  

Vertical gradients (over bottom 40mm)

  

Cools From

  

Heats From

  

Heats from 30°C to 550°C

  

Heating Rate

  

Temp Range

  
  
  
  
  
  
  
  
  
  

1200°C to 200°C

  

Cools from 1200°C to 800°C

  

Display Resolution

  
  
  
  

Power

  
  
  
  
  
  
  
  
  
  

Blackbody Source

  

Computer Interface

  
  

Voltage

  
  

Calibration Volume

  
  
  
  
  
  

Stability

  
  
  
  
  
  
  

Approximate time to temperature from ambient

  

Cools from 550°C to 275°C

  

Cools from 550°C to 60°C

  

Cools from 650°C to 150°C

  

Heats from 30°C to 650°C

  

Uniformity - Radial, Liquid Bath Mode

  
  

Uniformity - Axial, Liquid Bath Mode (40mm)

  
  

Uniformity - Radial, Dry Block Mode (Between Wells)

  

Uniformity - Axial, Dry Block Mode (40mm)

  

Heating Time

  
  
  
  

Cooling Time

  
  
  
  

Insert Size

  

Insert Types

  
  

Uniformity - Lower 40mm (Axial) Dry Block Mode

  
  

Uniformity - Radial Bath Mode

  
  

Uniformity - Lower 40mm (Axial) as Liquid Bath

  
  

Unformity - Between Wells Dry Block Mode (Radial)

  
  

Surface Sensor Calibrator

  

Indiactor Units

  

Heats from 50°C to to 700°C

  

Overall Dimensions

  

Products - Dry Blocks and Portable Baths UAE

Display

Dry Blocks and Portable Baths

For the past 40 years, Isotech has been at the forefront of new developments in temperature metrology.From hand-held thermometers to Primary Standards, from field technicians to National Laboratories, Isotech has the perfect equipment for your application.
The temperature sensor that is being calibrated is inserted into pre-drilled metal inserts in dry-block (dry-well) calibrators. These dry-block calibrators contain a removable metal insert with pre-drilled holes into which sensors for measurement can be put. The dry-block insert is a temperature source that may be adjusted to different test points and delivers a consistent temperature. Because it relies on strong thermal contact between the metal insert and the temperature sensor, the inserts' hole diameters are often variable. The display is usually calibrated to work with or without a reference thermometer. These calibrators have a lightweight, small container for simple transport to the field, as well as an insert that can typically calibrate one to three sensors at a time.

Image Brand
Part Number : 511 Medusa 3 Isotech 511 Medusa 3 |50°C to 700°C Calibrator
VIEW
ADD TO CART
Image Brand
Part Number : Drago 4934 Isotech Drago 4934 |30°C to 250°C Calibrator
VIEW
ADD TO CART
Image Brand
Part Number : 510 Medusa Isotech 510 Medusa |30°C to 550°C Calibrator
VIEW
ADD TO CART
Image Brand
Part Number : 525 Isis Isotech 525 Isis |-100°C to +40°C Calibrator
VIEW
ADD TO CART
Image Brand
Part Number : Pegasus 4853 Isotech Pegasus 4853 |150°C to 1200°C Calibrator
VIEW
ADD TO CART
Image Brand
Part Number : Gemini 4857-700 Isotech Gemini 4857-700 |50°C to 700°C Calibrator
VIEW
ADD TO CART
Image Brand
Part Number : Gemini 4857-550 Isotech Gemini 4857-550 |35°C to 550°C Calibrator
VIEW
ADD TO CART
Image Brand
Part Number : Calisto 4953 Isotech Calisto 4953 |30°C to 250°C Calibrator
VIEW
ADD TO CART
Image Brand
Part Number : Venus 4951 Isotech Venus 4951 |-35°C to 140°C Calibrator
VIEW
ADD TO CART
Image Brand
Part Number : Europa 4520 Isotech Europa 4520 |-45°C to 140°C Calibrator
VIEW
ADD TO CART
Image Brand
Part Number : Hyperion 4936 Isotech Hyperion 4936 |-25°C to 140°C Calibrator
VIEW
ADD TO CART
Image Brand
Part Number : Jupiter 4852 Isotech Jupiter 4852 |35°C to 660°C Calibrator
VIEW
ADD TO CART

Isotech 511 Medusa 3, Isotech Drago 4934, Isotech 510 Medusa, Isotech 525 Isis, Isotech Pegasus 4853, Isotech Gemini 4857-700, Isotech Gemini 4857-550, Isotech Calisto 4953, Isotech Venus 4951, Isotech Europa 4520, Isotech Hyperion 4936, Isotech Jupiter 4852

Brands We Represent

© 2022 Copyright ® All Rights Reserved. General Tech Services LLC.