The Mitutoyo SDV-D Digimatic single-function vertical linear scale allows for accurate positioning by installing it to jigs, tools, and small machine machines. A built-in ABSOLUTE scale is also provided, which uses the Mitutoyo ABS point and does not need to be zeroed when turned on. Furthermore, overspeed mistakes have been reduced, resulting in increased reliability. The ORIGIN key allows you to define an absolute zero point that will be used as a reference for future measurements. The scale mounting direction determines the vertical display. Longer battery life means less upkeep. An output port is included to send measurement data for use in control and gauging systems. External display devices for EC counters are available.
0 - 12" / 0 - 300 mm
0.002" / 0.04 mm
0.0005" / 0.01 mm
Origin-set, Zero-setting, Power on/off, Presetting, Datahold, Data output, inch/mm conversion (inch/mm models),Measurement direction switching*Alarm: Low voltage, Measurement value composition error*not available for single-function models
The ORIGIN key allows setting of an absolute zero point to be used as reference in subsequent measurements. Once set, the ABS Digimatic Scale Unit is ready to show its true position whenever turned on rather than “0.00” as with standard models.
The ZERO/ABS key allows the display to be zero-set at any slider position along the beam for incremental comparison measurements. This key will also allow return to absolute coordinates with a display of the true position from the origin point.
& No rack, no pinion, no glass scale. The Digimatic scale is safely embedded in the hardened stainless steel blade.
Horizontal or vertical display according to the scale mounting direction.
A special type provided with a diameter displaying function is available for lathes.
All units come with two mounting brackets, each located at one end of the scale.